SMART-AVI HDC-IR Manual de usuario

TECHNICAL SPECIFICATIONS WHAT’S IN THE BOX

IR-EYE

IR Frequency Range 30 KHz to 80 KHz

Capture Distance Up to 25’

Cable Connector 3.5 mm stereo jack

IR Signal Indicator Green LED

IR-EYE

IR Frequency Range 30 KHz to 80 KHz

Capture Distance Up to 10’

Cable Connector 3.5 mm stereo jack

IR Signal Indicator Red LED

OTHER

Power 12VDC 2A

Cable Link CAT5 568A or 568B

Dimensions 2.5” W x 2.5” D x 1.0” H

Weight .25 lb

Operating Temp. 0°C ~ 40°C / 32°F ~ 104°F

Storage Temp. -20°C ~ 70°C / -4°F ~ 158°F

Relative Humidity Up to 95%

PART NO. QTY DESCRIPTION

HDC-IR 2 IR CAT5 Point to Point

SM-LED 1 IR Emitter

SM-EYE 1 IR Eye (Optional)

PS12VDC2A 2 Power supply 12VDC2A

1 Quick Start Guide

DESIGNED

AND MADE

IN THE USA

NOTICE

The information contained in this document

is subject to change without notice. iPGARD

makes no warranty of any kind with regard

to this material, including but not limited to,

implied warranties of merchantability and

tness for a particular purpose. iPGARD

will not be liable for errors contained

herein, or for incidental or consequential

damages in connection with the furnishing,

performance, or use of this material. No

part of this document may be photocopied,

reproduced, or translated into another

language without the prior written consent

from iPGARD, Inc.

20170518

Toll Free: (888)-994-7427

Phone: (702) 800-0005

Fax: (702)-441-5590

WWW.iPGARD.COM

A full manual can be downloaded from

www.smartavi.com/hdc-ir/

HDC-IR

IR CAT5 Point to Point Extender

USES A SINGLE CAT5

TO BROADCAST IR

UP TO 1000FT AWAY(333M

Quick Start Guide

The HDC-IR range of products allow the

extension of Infra Red control signals using

single CAT5 UTP (category 5, unshielded

twisted pair) cable. The HDC-IR is the rst

product for this application.

• Uses easy to install, inexpensive CAT5

• Output reaches up to 1000 feet (300 m)

• Sends IR and Power signals over CAT5

• High ground loop immunity

• Built-in lightning, power surge and

transient protection

• Remote Units come with Buffered Outputs

• Compact Enclosure

• Optional power supply for remote unit

• Fully compliant with standard modulated

IR and the latest IRDA

• Fully transparent path for all protocols

and data transfers

• Bi-directional IR

• Supports any IR Remote Control

IR-EYE

IR-LED

INTRODUCTION

FEATURES

HARDWARE INSTALLATION

1. Connect the IR LED to the IR window on the source device.

2. Connect power supply to the unit. Observe LED lighting up indicating power present.

3. Connect IR LED to the IR window on the souce device.

4. Connect the IR Eye to the Receiver.

5. Observe LED lighting indicating power present.Connect the speakers to the Audio Out port.

6. Connect the transmitter to the receiver using Category 5 UTP cable (Purchased separately).

The CAT 5 UTP cable, if purchased in bulk, will be wired using 568A or 568B wiring standard.

7. Once connected, check that the power LEDs on both the receiver and the transmitter are

on, IR status LED is on and RX LED is ashing when Remote control is used indicating that

communication is in progress

CAT5

DVD Player DVD Player DVD Player

IR-In Out-1 Out-2 Out-3

HDC-IR

IR extender over Twisted Pair

HDC-IR

CONTROL

IR-In Out-1 Out-2 Out-3

HDC-IR

IR extender over Twisted Pair

HDC-IR

CONTROL

Otros manuales de Extensor de SMART-AVI

SMART-AVI

SMART-AVI KLX-500-DUO Manual de usuario

SMART-AVI

SMART-AVI DVX-2P Series Manual de usuario

SMART-AVI

SMART-AVI SDX-XT-4P Manual de usuario

SMART-AVI

SMART-AVI FDX-M2U Manual de usuario

SMART-AVI

SMART-AVI FDX-3000 Manual de usuario

SMART-AVI

SMART-AVI USB2CX Manual de usuario

SMART-AVI

SMART-AVI FDX-500 Manual de usuario

SMART-AVI

SMART-AVI XTAV-TX Manual de usuario

SMART-AVI

SMART-AVI LDX-4P Manual de usuario

SMART-AVI

SMART-AVI DVX-4P Manual de usuario

SMART-AVI

SMART-AVI FVX-2000 Manual de usuario

SMART-AVI

SMART-AVI FDX-M4U Manual de usuario

SMART-AVI

SMART-AVI KLX-500-DUO Manual de usuario

SMART-AVI

SMART-AVI SDX Series Manual de usuario

SMART-AVI

SMART-AVI LDX-2P Manual de usuario

SMART-AVI

SMART-AVI USB-100 Manual de usuario

SMART-AVI

SMART-AVI SDX-XT-2P Manual de usuario

SMART-AVI

SMART-AVI SDX-XT-4P Manual de usuario

SMART-AVI

SMART-AVI USB2-Mini Manual de usuario

SMART-AVI

SMART-AVI USB2-Mini Manual de usuario

SMART-AVI

SMART-AVI XT-400 Series Manual de usuario

SMART-AVI

SMART-AVI DVX500 Manual de usuario

SMART-AVI

SMART-AVI V2V-AV2H-01 Manual de usuario

SMART-AVI

SMART-AVI XTPRO Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario