Skyfood LIS-1,5-N Manual de usuario

Data de Correção: 01/02/2016

UG0126 / 466220- INGLÊS

- BESIDES THIS EQUIPMENT, A COMPLETE RANGE OF OTHER PRODUCTS ARE MANUFACTURED, CONSULT OUR DEALERS

- DUE TO THE CONSTANT IMPROVEMENTS INTRODUCED TO OUR EQUIPMENTS, THE INFORMATION CONTAINED IN THE PRESENT

INSTRUCTION MANUAL MAY BE MODIFIED WITHOUT PREVIOUS NOTICE.

Skyfood Equipament LLC

OFFICE

11900 Biscayne Blvd. Suite 616 - North Miami, FL 33181 - USA

1-800-503-7534 | 305-868-1603

www.skyfood.us

Blender Silenzio / Licuadora Silenzio

LIS-1,5-N

INSTRUCTION MANUAL

MANUAL DE INSTRUCCIONES

UCCIONES

2

ENGLISH ................................................................................................3

ESPAÑOL ............................................................................................. 16

INDEX

35

___________________________________________________________

34

___________________________________________________________

3

1. IntroducƟon ......................................................................................4

1.1 Safety .................................................................................................................... 4

1.2 Main Components ................................................................................................. 5

1.3 Technical CharacterisƟcs ........................................................................................ 6

2. INSTALLATION and PRE OPERATION .................................................6

2.1 InstallaƟon ............................................................................................................ 6

2.2 How to assemble the Blender Cup ......................................................................... 6

2.3 PRE OPERATION..................................................................................................... 7

3.2 – Feeding Procedure .............................................................................................. 8

3. OperaƟon ..........................................................................................8

3.1 StarƟng.................................................................................................................. 8

3.3 CLEANING.............................................................................................................. 9

4. General Safety PracƟces .................................................................. 10

4.1 Basic OperaƟon PracƟces......................................................................................10

4.2 Safety Procedures and Notes before Switching the Machine ON ...........................11

4.3 RouƟne InspecƟon................................................................................................11

4.4 OperaƟon .............................................................................................................11

4.7 Warning................................................................................................................12

5. Analysis and Problems Solving......................................................... 12

5.1 Problem, causes and soluƟons..............................................................................12

4.5 AŌer Finishing The Work.......................................................................................12

4.6 Maintenance ........................................................................................................12

6. General Advices............................................................................... 13

7. Electric Diagram............................................................................... 14

SKYFOOD EQUIPMENT LLC - SERVICE ................................................... 28

SKYFOOD’S LIMITED WARRANTY ......................................................... 28

SUMMARY

4

1. IntroducƟon

1.1 Safety

When using this equipment, keep in mind some basic safety precauons:

1.1.1 Read all the instrucons.

1.1.2 In order to avoid the risk of electric shocks and damage to the machine, never install

equipment on a wet or humid surface nor dip it in water or any other liquid.

1.1.3 The use of the equipment must be supervised when used next to children.

1.1.4 Before cleaning and when not in use or before inserng or removing accessories,

disconnect machine from power source.

1.1.5 Never touch parts of the machine while on movement.

1.1.6 Do not use the equipment if cord or plug are damaged. Do not use the equipment if it

is not working correctly, nor if it has been damaged in any way. In case that happens, take

the equipment to the nearest Technical Assistance to check it up.

1.1.7 The use of accessories not recommended by the manufacturer may cause personal

hurt.

1.1.8 Keep your hands or any tool out of the machine while operang to avoid personal

hurt or any damage to the equipment. If it is needed to mix etc. switch OFF and unplug the

blender, use only a rubber spatula .

1.1.9 The knives are very sharp. Be careful while handling them.

1.1.10 In order to avoid the risk of personal hurt, never ﬁx on the Cup Base only the Central

Bearing with the knife . Before be sure the Cup is duly ﬁed and strongly screwed .

1.1.11 Firmly screw the Cup on the Base . Not doing so and if by an accident the knife is

exposed when the blender is running, personal hurt might occur .

1.1.12 Always place Lid on top of the Cup before turning machine ON.

1.1.13 Always hold the cup while the blender is working. If the cup gets lose, switch the

machine OFF immediately. Remove the product from inside the cup and screw it strongly ,.

1.1.14 While mixing hot liquids, remove the transparent ﬁll cap from the cup lid and keep

your hands away of the lid hole, avoiding possible burnings.

1.1.15 Do not use this machine on open air.

1.1.16 Do not leave the cord hanging out from the table or counter or lying on hot surfaces.

5

1.1.17 Before cleaning or maintenance disconnect machine from power

source.

1.1.18 Never use tools not belonging to machine to help operaon.

1.1.19 Never throw water or other liquid substances directly to the machine.

1.1.20 Never connect power source with wet feet or wet clothes.

1.1.21 Always assure the ground connecon before to use the blender .

1.1.22 For your safety, the temperature of the processed products shall not exceed 40 °

Celsius / 104° Fahrenheit.1.1.17 Do not leave the blender unaended while operang.

1.2 Main Components

All components of this machine were designed and made to its proper funcon according

to paern tests and experience of Siemsen.

01 – Cup

02 – Lid

03 – Motor Housing

04 – ON/OFF Switch

PICTURE 01

01

04

03

02

6

TABLE 01

CHARACTERISTICS UNIT LIS-1,5-N

Voltage V 127/220*

Frequency Hz 50/60

Rang W 370

Consumpon kW/h 0,37

Height in 15 3/8”

Width in 7 1/2”

Depth in 7 1/8”

Net Weight lb 5,3

Gross Weight lb 8,6

Cup Maximum Capacity L 1,5

1.3 Technical CharacterisƟcs

(*) Voltage will be only the one indicated on motor characteriscs label.

IMPORTANT

Metalúrgica Siemsen is NOT RESPONSIBLE for any damage caused when using NOT

ORIGINAL spare parts.

2. INSTALLATION and PRE OPERATION

2.1 InstallaƟon

The Professional Blenders models LI / LT and LV should be installed on a clean and stable

surface with a preferenally height of 850mm.

This equipment was developed to be used at 110 Volts or 220 Volts (50 Hz / 60 Hz).

Before starng the machine, check the voltage on the label existent on the cord. The

voltage shall match the electricity network voltage.

2.2 How to assemble the Blender Cup

2.2.1 – Put Rubber Sealing Ring Nº 01 on Central Bearing Nº 02, Pic. (02)

2.2.2 – Fit the Central Bearing Nº 02 + Rubber Sealing Ring Nº 01 on the Cup Base Nº 03,

Pic. (02)

2.2.3 – Screw the Cup Nº 4 on the Cup Base Nº 03, Pic. (02).

31

30 7

2.3 PRE OPERATION

What to do and what not to do with your Milk Shake Mixer.

You have to:

- Check the voltage before to switch ON the blender. Use only the voltage indicated on the

blender base .

- Check if the machine is ﬁrm The supporng surface must be clean and dry to avoid water

or dirt to be aspired along with the air .

- Put liquid ingredients inside the cup ﬁrst, then put solid ingredients.

- Cut all fruits, vegetables, boiled meat, ﬁsh or sea food in pieces of up to 2cm size. Cut

cheese in pieces of up to 1,5cm size.

- Use a rubber spatula to push ingredients into the liquid . ONLY with machine SWITCHED

OFF.

- Place the Lid on top of the Cup ﬁrmly before switching the machine ON and keep your

hand over the lid while the blender motor is working.

- Remove the thick sauces, buer, mayonnaise and similar consistence products removing

the blender base and pushing the mixture through the cup lower side .

- Drop the liquid or semi-liquid mixtures, straight into the blender cup.

- Never put hot ingredients inside the cup, let them cool down ﬁrst.

PICTURE 02

8

You should not:

- Expect your blender to replace any other kitchen appliance. It is not supposed to make

mashed potatoes, it does not blend egg white or any other cream for covering, it does not

grind raw meat, it does not blend hard pastas and do not extract kernels from fruits and

vegetables.

- Process mixtures too long. Remember that the blender works in seconds and not in

minutes. Therefore, never let your blender working for more than one minute. It is beer

to switch it oﬀand check the mixing consistency aer a few seconds to avoid too much

blending.

- Overload the motor with big or heavy porons as it will make the blender’s life shorter. If

motor stops, switch it oﬀimmediately, unplug and remove part of the load before to start

operaon again.

3. OperaƟon

3.1 StarƟng

Start the machine by turning ON/OFF switch , located on the Motor Housing N 04 (Pic.

01), to ON posion .

IMPORTANT

NEVER USE THIS EQUIPMENT TO PROCESS PASTES WITH THICK TEXTURE.

NEVER SWITCH THE MACHINE ON WITHOUT LOAD IN IT BECAUSE IT WILL CAUSE

IRREPARABLE DAMAGES.

3.2 – Feeding Procedure

To feed the blender proceed as follows:

a - Cut the product in small pieces of up to 2cm size. This process helps on blending me

mainly for frozen products. When triturang ice, it is recommended to drop some water

inside the cup.

b - Take out the lid No. 05 (Picture 02).

c - Place the product to be processed into the cup No.04 (Picture - 02) with the machine

switched OFF.

d - Place the lid back No. 05 (Picture 02) and switch the machine ON.

IMPORTANT

Unplug the blender in case of emergencies

29

28 9

3.3 CLEANING

The blenders cup parts are resistant to corrosion, hygienic and easily cleaned. Before using

them for the ﬁrst me and aer each use, take apart the cup pieces (pic. 02) and clean

them very well with warm clean water and neutral soap, wipe and dry them well.

DO NOT WASH ANY PIECES IN A DISH WASHER.

Revise all the pieces frequently before assembling them again. If the blades are stuck or

turn with diﬃculty, DO NOT USE THE BLENDER. Do a review turning carefully the blades

an- clock-wise (the opposed edges are sharpened): The blades must move without

diﬃcules.

Use only original SIEMSEN spare parts which are available at the Authorized Dealer.

THE USAGE OF DAMAGED OR NOT RECOMMEND SPARE PARTS MAY CAUSE SERIOUS

PERSONAL HURTS OR DAMAGES TO YOUR BLENDER.

See on Page 03 (Pic. 02) all the steps to assemble the cup . NEVER DIP THE MOTOR

HOUSING IN WATER OR ANY OTHER LIQUID.could be exposed to severe electrical shocks

or even to a fatal situaon.

IMPORTANT:

Always disconnected the machine from power source before cleaning

ATTENTION

Keep the drain tube without obstrucƟons.

Clean base external side with a wet cloth.

Motor has permanent lubricaon and does not need any addional lubricaon.

ALL MAINTENANCE MUST BE DONE BY DEALERS TECHNICAL ASSISTANTS.

10

The following safety instrucons are addressed to both the operator of the machine as

well as the person in charge of maintenance.

The machine has to be delivered only in perfect condions of use by the Distributor to the

user. The user shall operate the machine only aer being well acquainted with the safety

procedures described in the present manual. READ THIS MANUAL WITH ATTENTION.

4.1 Basic OperaƟon PracƟces

4.1.1 Dangers

Some areas of the electric device have parts that are connected or have parts connected

to high voltage. These parts when touched may cause severe electrical shocks or even be

lethal.

Never touch manual commands such as switches, buons, turning keys and knobs with

your hands wearing wet clothes and/or wet shoes. By not following these instrucons

operator could be exposed to severe electrical shocks or even to a lethal situaon.

4.1.2 Warnings

* The operator has to be well familiar with the posion of ON/OFF Switch to make sure the

Switch is easy to be reached when necessary.

* Before any kind of maintenance, physically remove plug from the socket.

* Provide space for a comfortable operaon thus avoiding accidents.

* Water or oil spilled on the ﬂoor will turn it slippery and dangerous. Make sure the ﬂoor

is clean and dry.

* Before using any commands (switch, buons, lever), be sure it is the correct one. In case

of doubt, consult this manual.

* Never touch any manual commands (switch, buons, lever) unadvisedly.

* If any work is to be made by two or more persons, coordinaon signs will have to be

given for each operaon step. Every step of the operaon shall be taken only if a sign has

been made and responded.

4.1.3 Advices

* In case of power shortage, immediately switch the machine oﬀ.

* Use recommended or equivalent lubricants, oils or greases.

* Avoid mechanical shocks, once they may cause damages or bad funconing.

* Avoid water, dirt or dust contact to the mechanical and electrical components of the

machine.

* DO NOT change the standard characteriscs of the machine.

* DO NOT remove, tear oﬀor maculate any safety or idenﬁcaon labels stuck on the

IMPORTANT

If any recommendaƟon is not applicable to your equipment, please ignore it.

4. General Safety PracƟces

27

7. Diagrama Eléctrico

PN

M1~

RED ELÉCTRICA

110V / 50-60Hz

LLAVE

PRENDE/DESLIGA

Skyfood LIS-1,5-N Manual de usuario

Manuales populares de Licuadora de otras marcas