Skope BB Series Manual de usuario
BB, CL & CC Series
1, 2 & 3 Door Horizontal Chillers
User Manual
MAN11015 Rev. 2.1 Mar. 2019
SKOPE Backbar, Counterline & Slimline
CL400
BB580
CL800
SKOPE Warranty Protection
Register now for peace of mind
It’s quick and simple. Take a few minutes to register
your SKOPE product and enjoy more efficient
support plus other warranty benefits. When
registering, make sure you have your cabinet serial
number at hand.
To register online:
Visit our website at www.skope.com/warrantyprotection
then complete and submit the online registration form.
Or freephone:
1800 121 535 (Australia)
0800 947 5673 (New Zealand)
SKOPE 1-year Extended Warranty
Extend your Warranty Protection by 1 year during registration. Please
check you have not already organised an extended warranty through
your dealer at time of purchase. For pricing information on an extended
warranty visit www.skope.com/warrantyprotection
Service & Support
We know you will get years of satisfaction from your new SKOPE
product when you follow a few simple preventative maintenance
guidelines.
Helpful information is available on our website
www.skope.com/serviceandsupport
Thank you for purchasing a SKOPE refrigeration product.
CONTENTS
1 Models
Backbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Counterline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Slimline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2 Installation
Safety First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Locating the Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Positioning the Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Legs and Castors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Shelving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Fitting the Shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Loading Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Remote Cabinet Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Electronic Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Pipe Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3 Operation
Automatic Start-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Refrigeration Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Cabinet Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Electronic Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Electronic Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Controller Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Temperature Setpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Controller Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4 Servicing
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Condenser Coil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Cabinet Interior Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SKOPE Backbar, Counterline & Slimline
User Manual 4
1Models
Backbar
Counterline
Slimline
Model Config. Doors Refrigeration
unit
Current
draw
Operating temperature
range
BB380i-2SL
Sliding
doors
2Integral 3.6A
+1°C to +4°C up to 32°C
ambient
BB580i-3SL 3Integral 3.9A
BB780i-4SL 4Integral 4.0A
BB380i-2SW
Swing
doors
2Integral 3.4A
BB580i-2SW 3Integral 3.6A
BB780i-4SW 4Integral 3.8A
BB380r-2SL
Sliding
doors
2Remote 0.9A
BB580r-3SL 3Remote 1.5A
BB780r-4SL 4Remote 1.6A
BB380r-2SW
Swing
doors
2Remote 0.7A
BB580r-3SW 3Remote 0.9A
BB780r-4SW 4Remote 1.4A
Model Config. Doors Refrigeration
unit
Current
draw
Operating temperature
range
CL400i-2SL
Sliding
doors
2Integral 2.5A
+1°C to +4°C up to 32°C
ambient
CL600i-3SL 3 Integral 3.4A
CL800i-4SL 4 Integral 4.0A
CL400i-2SW
Swing
doors
2Integral 2.3A
+1°C to +4°C up to 40°C
ambient
CL600i-3SW 3 Integral 3.2A
CL800i-4SW 4 Integral 3.8A
CL400r-2SL
Sliding
doors
2Remote 0.5A
+1°C to +4°C up to 32°C
ambient
CL600r-3SL 3Remote 0.9A
CL800r-4SL 4Remote 1.3A
CL400r-2SW
Swing
doors
2Remote 0.3A
CL600r-3SW 3Remote 0.7A
CL800r-4SW 4Remote 1.0A
Model Config. Doors Refrigeration
unit
Current
draw
Operating temperature
range
CC300i-2SL
Sliding
doors
2Integral 2.5A
+1°C to +4°C up to 32°C
ambient
CC500i-3SL 3Integral 3.4A
CC700i-4SL 4Integral 4.0A
CC300i-2SW
Swing
doors
2Integral 2.3A
+1°C to +4°C up to 40°C
ambient
CC500i-3SW 3Integral 3.2A
CC700i-4SW 4Integral 3.8A
CC300r-2SL
Sliding
doors
2Remote 0.5A
+1°C to +4°C up to 32°C
ambient
CC500r-3SL 3Remote 0.9A
CC700r-4SL 4Remote 1.3A
CC300r-2SW
Swing
doors
2Remote 0.3A
CC500r-3SW 3Remote 0.7A
CC700r-4SW 4Remote 1.0A
5
SKOPE Backbar, Counterline & Slimline
Installation
User Manual
2Installation
Safety First Always observe safety precautions when using any electrical appliance.
Read these instructions carefully and retain them for future reference.
When the appliance is used by or near young children or infirm persons,
close supervision is necessary, especially to ensure children do not play
with it.
Do not use this appliance for other than its intended use.
Do not cover the grilles or block the entry or exhaust of airflow by
placing objects up against the refrigeration unit.
Do not probe any opening.
Only use this appliance with the voltage specified on the rating label.
Ensure the appliance has adequate ventilation as this is essential to
economical, high performance.
Be careful not to touch moving parts and hot surfaces.
For your own safety and that of others, ensure that all electrical work is
done by authorised personnel.
If the power supply flexible cord becomes damaged, it must be replaced
by an authorised service agent or similarly qualified person in order to
avoid a hazard.
Ensure all necessary safety precautions are observed during installation
or removal of the refrigeration unit.
The appliance is not designed to be stable while in motion. Use extreme
caution when moving or transporting it.
Do not store explosive substances such as aerosol cans with a
flammable propellant in this appliance.
Please contact SKOPE customer services for advice regarding disposal
of this appliance.
CAUTION
Never overload the power supply, which could damage the
chiller and product. See the rating label inside the cabinet for
the safe power supply and current draw.
WARNING
Always disconnect the chiller from the mains power supply
before cleaning or maintenance.
WARNING
If retrofitting door locks, ensure retrofit is done by a SKOPE
approved service technician following SKOPE guidelines on
instruction sheet PRN8503.
6Installation
User Manual
SKOPE Backbar, Counterline & Slimline
Locating the Cabinet
Location When positioning the cabinet, avoid direct sunlight and warm draughts etc.
The cabinet must NOT be situated where it is affected by warm or hot air
from adjacent equipment, as this will compromise the airflow and
performance of the chiller.
The cabinet must be positioned on a level surface for the doors to shut and
seal correctly, and to prevent the condensate tray from overflowing.
Adequate allowance should be made for door opening.
Always ensure that the top of the cabinet is shielded from impact and
moisture, with either a SKOPE provided bench top, or with a custom or
existing bench top.
When installing the cabinet
Avoid direct sunlight and warm draughts etc.
Allow adequate space for the doors to open fully.
Ensure the cabinet is positioned on a level surface so the doors shut
and seal correctly and to prevent the condensate tray from overflowing.
Ventilation For efficient operation of the chiller, it is essential that adequate ventilation
be provided around the front of the refrigeration unit. Normal operating
conditions should not exceed the operating temperature range (see page 4).
It is critical that the hot refrigeration exhaust air is not restricted and that it
can easily flow out and away from the front of the cabinet. Never store
cardboard cartons or other items in front of the refrigeration unit. The
ventilation slots on the unit front cover must be kept clear at all times.
Power Supply The chiller is supplied with a flexible power cord and plug, which is located
at the rear of the cabinet.
Before final positioning of the cabinet, pull the power cord out from the
cabinet and connect to the power supply.
WARNING:
Do NOT overload the power supply. See the rating label inside
the cabinet for power supply and current draw.
7
SKOPE Backbar, Counterline & Slimline
Installation
User Manual
Positioning the Cabinet
Legs and
Castors
The chiller is packed with a set of adjustable height legs and a set of
adjustable height castors. Either of these sets can be fitted to the cabinet
depending on specific height and manoeuvrability requirements. The legs or
castors should be fitted to the base of the cabinet before final positioning.
The adjustable legs screw into the castor mounting plates attached to the
bottom of the cabinet. The adjustable legs can adjust the cabinet height up
to 30mm.
To adjust leg height
The adjustable castors screw into the castor mounting plates attached to the
bottom of the cabinet. The two lockable castors should be fitted to the front
of the cabinet and the non-locking castors fitted to the rear. The adjustable
castors can adjust the cabinet height up to 15mm.
To adjust castor height
1. Turn the black plastic foot
at the bottom of the leg
counter-clockwise to raise
the height or clockwise to
lower.
1. Loosen the lock nut.
2. Turn the castor counter-
clockwise to raise the
height or clockwise to
lower (see image below).
Re-tighten each lock nut
after final adjustment has
been made.
Castor
mounting plate
Adjustable leg
Plastic foot
Lock nut
8Installation
User Manual
SKOPE Backbar, Counterline & Slimline
Shelving
Fitting the
Shelves
Remove all packaging material from the shelves. Clip the shelf support
brackets into the shelf support strips, at the desired heights, and fit the
shelves. The shelves may be positioned at different heights to suit various
products. Always ensure that the shelf clips are securely engaged in each
of the shelf support strips. The shelf support strips are marked ‘+’ for easy
location of shelf clips and can be lifted up and removed for cleaning
purposes.
Loading
Product
The chiller should be left running for 30 minutes before loading with product.
When loading product
Allow air space around all the product to ensure even cooling and
efficient operation of the chiller.
Do not allow products to overhang the front of the shelf as this could
prevent the doors from shutting. Leave an airspace of at least 75mm
above product loaded on the top shelf.
Do not exceed a maximum loading of 20kg per shelf.
Remove some product if the shelves are flexing or bending.
9
SKOPE Backbar, Counterline & Slimline
Installation
User Manual
Remote Cabinet Installation
SKOPE horizontal remote cabinets are supplied with a seperate instruction
sheet: Guidelines for SKOPE remote Refrigeration (PRN2362), and
specification sheet: SKOPE Gen 2 Horizontal Remote Cooler -
Specifications (PRN1647). Refer to these sheets for SKOPE remote
refrigeration installation guidelines and specifications.
Electronic
Controller
When the cabinet is connected to the power supply, the electronic controller
will display the current cabinet temperature. On the controller display, the
symbol will indicate the compressor output signal has been initiated and the
symbol will indicate the evaporator fan is on.
Pipe Locations Refer to the images below (remote chiller unit pictured) for component
locations and unit access points.
Unit Pipework Cover Refrigeration Unit Compartment
Drain Tube
Suction Line
Liquid Line
Rear of Cabinet
10 Operation
User Manual
SKOPE Backbar, Counterline & Slimline
3Operation
Automatic Start-Up
Connect the cabinet to the mains power supply and check operation of the
refrigeration unit and electronic controller. If the cabinet has been on its
back, leave for 30 minutes before running.
Refrigeration
Unit
The compressor, and the condenser and evaporator fans should all operate
within two minutes from the time the cabinet is plugged in. This may be
verified by listening for compressor switch-on and checking for air
movement out of the top ventilation slots in the refrigeration unit front cover.
The compressor and condenser fan should switch on and off depending on
the cabinet temperature.
Cabinet
Lighting
The light switch, located next to the electronic controller on the refrigeration
unit front cover, activates the cabinet interior lighting and can be switched on
or off as required.
Electronic
Controller
When the cabinet is connected to the power supply, the electronic controller
will display the current cabinet temperature. The compressor LED will
indicate the compressor is operating and the evaporator fan LED will
normally come on within two minutes (see “Electronic Controller” on page 11
for controller display).
To ensure efficient operation, the electronic controller forces regular
defrosts. During the defrost cycle, the compressor and condenser fan switch
off and the evaporator fan stays on.
IMPORTANT
If the cabinet has been on its back, leave for 30 minutes
before running.
Otros manuales para BB Series
1
Este manual sirve para los siguientes modelos
41
Tabla de contenidos
Otros manuales de Enfriador de Skope
Skope
Skope BB Series Manual de usuario
Skope
Skope B550-2 Manual de usuario
Skope
Skope OD460 Manual de usuario
Skope
Skope SC112N-AC Manual de usuario
Skope
Skope B600G-2 Manual de usuario
Skope
Skope Serene SC112N-A Manual de usuario
Skope
Skope OD460 Manual de usuario
Skope
Skope ActiveCore BME-N Series Manual de usuario
Skope
Skope OD260 Manual de usuario
Skope
Skope SERENE SC112G Manual de usuario
Skope
Skope SK650-2 Manual de servicio
Skope
Skope Pegasus PG100HC-2 Manual de usuario
Skope
Skope BME1200-AC Manual de usuario
Skope
Skope B1200-2 Manual de usuario
Skope
Skope PEGASUS PG600VC Manual de usuario
Skope
Skope TME1000 Manual de usuario
Skope
Skope SK1000 Manual de servicio
Skope
Skope B550-2 Manual de servicio
Skope
Skope TME ActiveCore Series Manual de usuario
Skope
Skope BackBar X Series Manual de usuario
