SKF WEM-200 Manual de usuario

Vsfv ;:df v;dfccc

DO Saint Cyr WEM 200

WEM-200

SKF Wheel End Monitoring

User Manual – Quick Start

WEM200 User Manual

Page 2 of 25 DO Saint Cyr User Manual WEM 200

Table of Content

1Description................................................................................................................4

2WEM2 assembly .......................................................................................................5

3Product activation ....................................................................................................6

4Product modes .........................................................................................................6

5Download the Mobile application ...........................................................................8

5.1 Application description.....................................................................................8

5.1.1 “Vehicles” view ......................................................................................8

5.1.1.1 “All” page.......................................................................................................................................8

5.1.1.2 “Alarms” page ...............................................................................................................................9

5.1.1.3 “Nearby” page...............................................................................................................................9

5.1.2 “My Ride” view.................................................................................... 10

5.1.3 “More” view......................................................................................... 10

6Product commissioning & status ........................................................................ 11

6.1 Create a new vehicle :.................................................................................. 13

6.2 Access to an existing vehicle ....................................................................... 17

6.3 Add Sensor to a vehicle................................................................................ 18

6.4 Sensor status................................................................................................ 19

7Precautions & maintenance ................................................................................. 22

WEM200 User Manual– Version 1 – September 2019

Page 3 of 25 DO Saint Cyr User Manual WEM 200

Table of Content

Aucune entrée de table d'illustration n'a été trouvée.

WEM200 User Manual

Page 4 of 25 DO Saint Cyr User Manual WEM 200

1 Description

Product functionality:

WEM200 (Wheel end Monitor) – is a condition monitoring device. It monitors wheel end bearing conditions by

measuring and analyzing vibrations of the wheel end bearing of the vehicle. The vehicle is generally a truck, a

trailer or a bus. It provides warning in case of bearing failure detected and facilitates regular wheel end bearing

condition check. Bearing status information is sent to a smart device through BLE (Bluetooth Low Energy).

Additionally, the temperature is measured and transmitted through BLE.

WEMs is delivered with a separated magnet which is used to wake up the product.

WEM200 User Manual– Version 1 – September 2019

Page 5 of 25 DO Saint Cyr User Manual WEM 200

2 WEM2 assembly

Mechanical assembly on vehicle:

Please respect below mounting instructions to ensure WEM to perform proper analysis

1. Remove the rim cover (if existing)

2. Unscrew two consecutive rim nuts

3. Position the WEM on the bolts

/!\ Please mind the arrows directions. They shall target the tire.

4. Screw the wheel nuts according to standard mounting specification

5. Put back the rim cover (if existing)

WEM200 User Manual

Page 6 of 25 DO Saint Cyr User Manual WEM 200

3 Product versions

Product is able to work in 2 ways depending of FW configuration requested by customer.

•Mobile : where Mobile App is the only user interface for all operations associated with WEM 200 sensor

•Telematics where Mobile App is used for product commissioning (including reset/remove) and user telematics

system (including gateway) is used to monitor sensor WEM 200

WEM200 User Manual– Version 1 – September 2019

Page 7 of 25 DO Saint Cyr User Manual WEM 200

4 Product activation and functions

Product can have 3 different states :

Transport

Standstill

Operating

The product is initially received in transport mode : no BLE communication and no measurement

Activation of the product is done while approaching the magnet from sensor housing in the “Magnet” identified area.

Then LED is then lighting green.

In case product has been previously configured, LED lights green 1s.

If product is not configured, the LED lights green during the full configuration sequence done with mobile app.

If no specific action is done and product is has not been configured the product goes back to transport after 30s.

For “Mobile” FW version, the product transmits BLE frame every 10s when vehicle is standstill

For “Telematics”FW version, the product transmits BLE frame every 30mn when vehicle is operating in movement on the

road

The product handles itself the switching from standstill to operating mode according to detection of vehicle movement.

Product can be set back to transport mode approaching magnet from sensor housing.

In case of failure detection on bearing the product LED blinks red 1s ON/1s OFF for 14 days.

Product can be RESET only via mobile App as described in related chapter.

In case of failure detection on sensor itself, the product LED blinks red for 14 days 1s ON/2s OFF ;

WEM200 User Manual

Page 8 of 25 DO Saint Cyr User Manual WEM 200

5 Mobile application

A mobile application dedicated to iOS smart devices has been developed by SKF.

This mobile Application is delivered by SKF in following ways:

1- Pilot customers: registered user of each company receives an e-mail from SKF providing a link for download of

the mobile application

2- Serial phase: users can download the mobile application from Apple Store

5.1 Application description

Application is made of 3 main views displayed in the bottom bar of the App :

5.1.1 “Vehicles” view

5.1.1.1 “All” page

it provides the list of registered vehicles from a company – vehicle could be found using the mobile app search bar

It allows to create new vehicles by clicking symbol + on top right corner

WEM200 User Manual– Version 1 – September 2019

Page 9 of 25 DO Saint Cyr User Manual WEM 200

5.1.1.2 “Alarms” page

It provides the list of vehicles were a WEM2 sensor alarm have been detected

You can get access to each vehicle from the list to see its current state and detect if a sensor is still defective and its

location.

5.1.1.3 “Nearby” page

It provides the list of all vehicles detected in the close area where scanning is done by the user of the mobile app

You can get access to each vehicle from the list

WEM200 User Manual

Page 10 of 25 DO Saint Cyr User Manual WEM 200

5.1.2 “My Ride” view

It provides option to attach 2 vehicles for instance a truck and a trailer

5.1.3 “More” view

It provides legend for icons used in mobile app and release version. Help & Privacy gives access to additional information.

Tabla de contenidos

Otros manuales de Instrumento de medición de SKF

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario