Sinclair ASC-24A Manual de usuario
USER'S MANUAL
ASC-24A, ASC-36A, ASC-42A
CASSETTE SERIES
CONTENTS
Thank you purchasing this SINCLAIR air conditioner.Read this MANUAL carefully prior to use of the air conditioner
and then keep it properly for future reference.
Contents
1
2
4
6
15
16
18
19
23
24
26
34
36
Operation procedureInstallation
Operation mechanism and working range
Names and functions of parts
Safety cautions
Remote control operation procedure
Optimum operation
Trouble shooting
Installation notes
Care and maintenance
Technical specifications
Installation accessories and drawings
Indoor unit installation
Outdoor unit installation
Test and check items after installation
1
Operation mechanism and working range.
Working temperature range.
Schematic diagram for cooling only type.
1. Indoor heat-exchanger
4. Accumulator
7. Outdoor heat-exchanger
10. One-way valve
2. Connecting pipe
5. Compressor
8. Master capillary
11. Four-way reversing valve
3. Check valve
6. Filter
9. Auxiliary capillary
maximum cooling
minimum cooling
maximum heating
minimum heating
Indoor side DB/WB ( )
32/23
21/15
27/-
20/-
Outdoor side DB/WB ( )
43/26
21/15
24/18
-5/-6
Operation mechanism and working range
1
2
Names and functions of parts.
Names and functions of parts
2
Indoor unit
Outdoor unit ASC-24A
3
Names and functions of parts.
Indoor unit
Outdoor unit
Names and functions of parts
3
ASC-36A
ASC-42A
4
Safety cautions
Read the following carefully to assure safe use.
Avoid direct air flow to your body and avoid
excessive heating or cooling,which may make
you feel uncomfortable and do harm to your
health.
Do not remove protection grill nets from the
outdoor unit.
Do not reach hands or insert anything into the
unit air outlet.
If there is something abnormal (eg.burning
smell), cut off the power immeditely and con-
tact service center.
If room air is stuffy, air the room by opening
door and window for a while, but please close
the curtains when operating the unit to prevent
conditioned air from leaking.
Check whether the installed stand is still firm
enough after the unit has operated for a long
time.
If a worn-out stand is left unfixed,the unit may
topple and do harm.
Do not stand on the outdoor
unit or put anything on it, or
you may fall down or people
may get hurt by the falling
things.
Do not spray any paint or
pesticide on the unit, or it
may cause fire.
Never use wrong ampere rating fire.
Use of iron wire or copper wire may
cause the unit to break down or
cause fire.
Warning
Safety cautions
4
5
Safety cautions
Do not check or repair during the unit is
operating. It is very dangerous.
Never place objects near the air intake and the air outlet of the unit.
It may affect performance or stop operation of the unit.
Do not splash water directly to indoor unit
It may cause trouble or electric shock.
Do not use other
heating equip-
ment near the air
conditioner.
It will affect the
cooling perfor-
mance.
Do not bang the remote controller.and do not
press the button of the remote controller with
pointed object, or the remote controller may
be damaged.
Warning
Safety cautions
5
6
Remote control operation procedure
Name and Function-Remote Control
SWINGbutton
When it is pressed, the louvers
start to rotate automatically and
stop when repressed.
TEMP.button
TEMP. increases 1 by pressing
button once,and decreases 1
by pressing button once.
At COOL mode operation, SET
TEMP. can be selected from 16 to
30 .
At DRY mode operation, SET TEMP.
can be selected from 16 to 30 .
At HEAT mode operation, SET
TEMP. can be selected from 16 to
30 .
MODE button
Press this button to change the
operation mode in order of
FAN button
Press this button to change
the fan speed of:
COOL mode
DRY mode
FAN mode
HEAT mode
ON/OFF button
Press this button to turn on
or turn off the unit.
ＯＮ／ＯＦＦ
AUTO
Note:
Be sure that there are no obstructions.
Don’t drop or throw the remote controller.
Don’t place the remote controller in a location exposed to direct sunlight.
Remote control operation procedure
6
7
Liquid crystal displayer It
shows all set contents.
SLEEP button
Press this button to set
SLEEP operation.
TIMER OFF button
At operating, press TIMER
OFF button, set OFF TIME
in range of 0 to 24 hour to
stop the unit automatically.
TIMER ON button
At stopping, press TIMER
ON button, set ON TIME in
range of 0 to 24 hour to start
the unit automatically.
ＯＮ／ＯＦＦ
Remote control operation procedure
Name and Function-Remote Control. (Remove the cover)
Note: This type of remote controller is a kind of new current controller.Some buttons of
the controller which are not available to this air conditioner will not be described
below.
Remote control operation procedure
7
8
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Acondicionador de aire de Sinclair
Sinclair
Sinclair ASH-09AIM2 PT Manual de usuario
Sinclair
Sinclair ASDU-09A Manual de usuario
Sinclair
Sinclair FOCUS Series Manual de usuario
Sinclair
Sinclair MS-P12AI2 Manual de usuario
Sinclair
Sinclair MATRIX ASH-18AIM PT Manual de usuario
Sinclair
Sinclair DUCT ASD-09A Manual de usuario
Sinclair
Sinclair ASP-09AI Manual de usuario
Sinclair
Sinclair KJR-120A Manual de usuario
Sinclair
Sinclair ASP-18AI Manual de usuario
Sinclair
Sinclair ELEMENT Series Manual de usuario
Sinclair
Sinclair MV-D BI Series Manual de usuario
Sinclair
Sinclair SDV5-125DFA Manual de usuario
Sinclair
Sinclair ASH-09AISR SYMPHONY SERIES Manual de usuario
Sinclair
Sinclair SDV5 Series Manual de usuario
Sinclair
Sinclair MS-E36AI Manual de usuario
Sinclair
Sinclair ASH-09AF Guía de inicio rápido
Sinclair
Sinclair ASH-09AIP PT Manual de usuario
Sinclair
Sinclair MULTI VARIABLE SERIES Manual de usuario
Sinclair
Sinclair ASGE-09AIN WK Manual de usuario
Sinclair
Sinclair MS-E24AI Manual de usuario
