SimPal SimPal-T420 Manual de usuario
SimPal-T420
SimPal-T20
4G LTE Power Socket
SimPal-T420/T20 4G POWER SOCKET USER MANUAL
User Manual
Manual version 3.0
1
SimPal-T420/T20 4G POWER SOCKET USER MANUAL
SimPal-T420/T20 GSM Power Socket
Thank you for purchasing the SimPal-T420/T20.
SimPal-T420 4G power socket is a remote-controlled socket consisting of a 4G LTE
module. The power supply output can be turned on or off remotely by the SMS
command or voice calling.
SimPal-T20 slave socket need to work with T420 Master socket, It can control one T420
and four T20 with one SIM card.
Both T20 and T420 socket support temperature monitor, temperature control, schedule
control and delay control by sending SMS from your mobile phone.
All services and functions need to be supported by the 4G network and a SIM card.
This brochure suits for SimPal-T420 and SimPal-T20 model.
Details of the functioning and advanced operation of this socket are described in this
instruction manual.
2
SimPal-T420/T20 4G POWER SOCKET USER MANUAL
3.2 Download “SimPal-T40” APP 18
3.3 Register Master-number. 18
3.4 Pairing slave socket 20
3.5 Turn on/off power 22
3.6 Delay control 23
3.7 Schedule control 24
3.8 Temperature control 28
3.9 Temperature alarm 30
3.10 Wireless sensor alarm 32
3.11 SMS when on/off button pressed 34
4
SimPal-T420/T20 4G POWER SOCKET USER MANUAL
1. Purchase a GSM SIM card (mobile phone card) from GSM network
service provider and install it in the socket. This SIM card number
is referred as SimPal-T420 number on this brochure.
2. The user needs to activate the Caller ID Presentation function of
SIM card, and deactivate PIN code of the SIM. Contact with GSM
network service provider for support.
6
SimPal-T420/T20 4G POWER SOCKET USER MANUAL
For your safety
▪This socket was designed for home or office use. Do not use it on the electrical appliance
which is for industry or business operation, for example, iatrical appliances, large heaters
and refrigerates.
▪Before using this socket, make sure that the mobile phones can be used well in the area,
otherwise, do not put this socket into operation.
▪The power consumption of the appliances connected with the socket cannot exceed
3500W and the current cannot exceed 16A.
▪The electrical appliance which power consumption is higher than 1500W must be
grounded.
▪Do not make two plugs of socket short circuit.
▪Do not touch the socket jack by any metal objects or hand.
▪This socket was designed for indoor use. Don’t use it in wet, chemically aggressive or
dusty environment. Device working temperature range is -10℃~+35℃, stop to use this
product when environment temperature out of working range.
▪Do not plug this socket in a row, only allow connect other electricity device on the socket.
(nicht hintereinander stecken, nur andere Stromgeräte an der Steckdose anschließen
lassen).
▪Do not open the case unless maintenance needed by professionals.
▪Do not keep shaking or fall down this socket, otherwise it can be damaged.
▪This socket is a wireless signal transmission socket. Keep it away from electronic
equipment likely to interfere with the wireless signals, in order to avoid signals
7
SimPal-T420/T20 4G POWER SOCKET USER MANUAL
interference.
▪Switch off this socket and mobile phone when entering areas marked "Explosive", "Might
explode", "Closed wireless transceiver sockets" etc.
▪Do not cast this socket in a fire, as this may cause explosion.
▪This socket should only be operated from power approved by the socket manufacturer.
The use of any other types of power may damage the socket.
▪Keep the socket and its accessories out of the children reach.
8
SimPal-T420/T20 4G POWER SOCKET USER MANUAL
Exception clause
1. We operate on a policy of continuous development. We reserve the right to make changes
and improvements to any of the sockets described in this document without prior notice.
2. For the latest socket information, please visit: http://www.simpal.cn. We don’t guarantee for
the document veracity, reliability or any content except regulate in proper laws. Including
no guarantee for socket suitable market or suitable area promise.
3. We hold no responsibility for the illegal use of this socket.
4. We hold no responsibility for any loss of income or any special, incidental, consequential or
indirect damages howsoever caused.
5. The contents of this document are provided “as is”. Except as required by applicable law,
no warranties of any kind, either expressed or implied, including, but not limited to the
accuracy, reliability or contents of this document. We reserve the right to revise this
document or cancel some functions at any time without prior notice
9
Otros manuales para SimPal-T420
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Accesorios de SimPal
