Silhouette Curio Manual de usuario
Getting started with your
®
Getting Started with Silhouette Curio™
Connecting your Silhouette Curio™
Silhouette Curio™
electronic cutting tool
Silhouette Studio‰
software
replacement
snaps (x4)
8.5” x 6” base with 4
platforms, 1 embossing
mat, & 1 cutting mat
A/C adapter and
power cable
USB cable
blade with
ratchet cap
embossing tip
(fine & wide)
print & emboss
squares (x3)
1
remove tape
1
fine emboss tip
Check Included Items
The Silhouette Curio™ comes with the items shown in the following list. Check that all the items
have been included before starting. If you are missing any items listed below, please contact
Take the Silhouette Curio™ from the box and remove the strips of packing tape as indicated by the
following diagrams. These strips of tape are used to hold the moving parts of the Silhouette in place during
shipment.
remove tape
material
fasteners (x4)
Getting Started with Silhouette Curio™
1
2
3
2
2
Install the Silhouette Studio‰Software
PC Installation
1. Insert the included Silhouette Studio® CD into the CD drive of your computer.
2. Proceed through the installation process by following the on-screen prompts. If the installation window
does not automatically appear, browse to the CD drive in My Computer and double-click the setup.exe
program to run it.
3. If a “New Hardware Found” dialog box appears, follow the recommended instructions to accept your
system’s installation of the Silhouette driver.
Mac®Installation
1. Insert the included Silhouette Studio® CD into the CD drive of your computer.
2. Drag and drop the Silhouette Studio® application icon into the applications folder to install Silhouette
Studio®.
Connect the Silhouette Curio™
Once the Silhouette Studio® software is installed, connect the Silhouette Curio™ to the power supply.
Then connect the Silhouette to your computer with the included USB cable as shown in the diagram.
Turn the machine on by pressing the power button. If your PC displays a “New Hardware Found” dialog
box, follow the recommended instructions to accept your system’s installation of the Silhouette driver.
power
Getting Started with Silhouette Curio™
NOTE: To change the measurement units from the U.S. system to the metric system, choose
Edit -> Preferences… (Silhouette Studio® -> Preferences… on a Mac®). Under the Measurements
section of the preferences dialog box you will find several different units of measure.
3
How to Cut with Your Silhouette Curio™
Opening the Silhouette Studio®Software
Locate the Silhouette Studio® icon on the desktop, or in the Start Menu on your PC (in
the Applications folder on a Mac®). Double-click the icon to run the application.
Once Silhouette Studio® has loaded, you will notice a blank 8.5” x 6” page on your
screen.
If you would like to change the page dimensions or orientation, you will find the page setup
options already opened in a panel on the right-hand side of the screen.
To access these page setup options in the future, click the Page Settings button in the
options toolbar in the upper right-hand corner of the window.
Getting Started with Silhouette Curio™
Select Tool
New Drawing
Open
Save
Save to SD Card Print
Copy
Paste
Cut
Undo
Zoom In
Zoom to Selected Area Fill Color
Fill Gradient
Fill Pattern Line Color
Line Style Move
Rotate
Scale Replicate
Modify
Offset
Page Settings
Registration Marks
Grid Settings
Cut Settings
Design Page
Settings Panel
Silhouette Studio®
Color Preference
Preferences
Text Align
Drag Zoom
Fit to Window
Zoom Out
Redo
Send to Silhouette
PixScan Pan
Effects Auto Trace
Send to Silhouette
Point Edit Tool
Line Tool
Rectangle Tool
Rounded Rectangle
Ellipse Tool
Polygon Tool
Curved Shape Tool
Freehand Tool
Text Tool
Eraser Tool
Knife Tool
Drawing Area
Library
Online Store
Group
Ungroup
Select All
Deselect All Duplicate
Delete
Bring to Front
Send to Back
Weld
Offset
Show Library
Show Library and
Drawing Area
Select by Color
Smooth Freehand Tool
Arc Tool
PolygonTool
Emboss
Stipple
4
Getting Started with Silhouette Curio™
Drawing Text
To cut letters or words using any font on your computer, choose the text tool from the
toolbar on the left-hand side of the screen. With the text tool selected, click anywhere on
the page to begin typing.
After clicking on the page with the text tool, a blinking cursor will appear. Begin typing any letters/
words/phrases you choose.
While you are typing/editing text, the text options panel will appear on the right-hand side of the
screen. In this panel you can change the font, text size, weight, justification, character spacing and
line spacing. Use the mouse to highlight your text before making adjustments to the font, size,
weight, etc.
To finish typing your text, click anywhere off the page. This will end the text editing mode and
deselect the text. If you need to make a change to the text, double-click the text on the page using
the Select Tool (found on the left-hand toolbar).
To move your text around the page, click and drag it to a new location.
To resize your text, select the text and then click and drag one of the corner control handles.
To rotate your text, select the text, then click and drag the green circle displayed above the object.
5
Getting Started with Silhouette Curio™
Drawing Simple Shapes
Silhouette Studio® has built-in functions to draw simple shapes such as circles, squares, rectangles,
lines, polygons, and freehand line art. Each of these tools can be found in the toolbar on the left-hand
side of the Silhouette Studio® window.
Lines
To draw a line, choose the Line Tool on the left-hand toolbar. Either click and drag with the
mouse to draw a line, or click once to start the line and click a second time to end.
Hold SHIFT while creating a line to make a perfectly vertical, horizontal, or 45° line.
Rectangles/Squares
To draw a rectangle, choose the Rectangle Tool from the left-hand toolbar. Either click and
drag with the mouse to draw a rectangle, or click once to set one corner and click a second
time to set the opposite corner.
Hold SHIFT while creating a rectangle to make a perfect square.
Hold ALT (OPTION on Mac®) to draw the rectangle from the center instead of one corner.
Hold SHIFT + ALT (SHIFT + OPTION on Mac®) to draw a perfect square centered on your original
click.
6
Getting Started with Silhouette Curio™
Loading Your Material
Preparing Your Mat
Choose your mat based on the type of project you want to make. If you are only cutting, use the
cutting mat. If your project needs to be embossed, use the embossing mat. You can cut on the
embossing mat as well, but it will last longer if you limit the number of cuts performed on the mat.
Remove the protective liner from the cutting mat or embossing mat.
Position your paper or other media on the mat according to the diagram shown in Silhouette Studio®.
Tip: To keep your material secure when embossing, place the material fasteners around the
edge of your material as needed.
If you don’t see an image of the mat under your document on the screen, click the Page Setup
button in the options toolbar in the upper right-hand corner of the window.
Position your image on the screen where you want it to cut or emboss on the mat. Be sure to keep
your design within the red margins on your page.
7
Getting Started with Silhouette Curio™
Selecting the Platforms and Preparing the Base
The Curio can accommodate a wide range of materials by adding or removing platforms. The Curio
comes with 4 platforms (marked with either a ‘1’ or a ‘2’). For common material types, the Silhouette
Studio® cut settings will indicate which combination of platforms you should use (for example, a
platform setting of ‘3’ would require both a #1 platform and a #2 platform since 1+2=3).
Once you have determined the appropriate combination of platforms, place them onto the base
over the snap posts. Place your mat on top of the platforms and secure everything together with the
snaps.
8
Replacing Snaps: If a snap needs to be replaced,
it can be exchanged with one of the replacement
snaps provided with your Curio.
To do so, simply remove the old snap by pinching
the feet together on the underside of the base
and pulling the snap out. Next, insert the new
snap (with the feet closest to the outside edge
of the base being inserted first). Finally, rock the
snap into place so that the two inner feet lock
into the base.
tool storage slots
Getting Started with Silhouette Curio™
Prepare the blade plunger by removing the protective covering and adjusting the blade to the
appropriate number setting for the material you plan to cut. Refer to Silhouette Studio® for
recommended blade settings for different materials.
9
ratchet cap
blade
numbered blade setting
To adjust the blade setting, place the grey ratchet cap on the end of the blade so the arrow on the cap
lines up with the red line on the blade. Turn the ratchet to the desired number.
Blade setting
1
4-6
7-10
2-3
Material
Thin materials such as vinyl and smooth heat transfer material
Thicker materials such as textured cardstock and pattern papers
Thick materials such as canvas
Medium-weight materials such as paper, cardstock and flocked heat transfer material
NOTE: To remove fibers from blade housing, ratchet blade down to 0 and carefully grasp the
white tip turning it counterclockwise to remove the small end cap. Blow fibers away (do not
touch blade). Replace and hand-tighten cap.
Inserting the Base into the Curio
Before inserting the base into the Curio, it is important to
ensure there is adequate clearance in front of and
behind the Curio for the base to move in and out
unimpeded. You can also extend the stabilizing feet
for additional stability of heavy or long projects.
To load the base into the Curio:
1. Power off the Silhouette Curio
2. Insert the base into the front of the Curio
3. Push the base inward until the leading edge of
the base extends out the back of the Curio
4. Power on the Curio
Tabla de contenidos
Otros manuales de Trazador de Silhouette
