SIIG AV-GM09V3-S1E Manual de usuario

8x1 VGA/Component/S-Video/Composite

Switch with Audio & Ethernet Control

P/N:

Safety and Notice

The AV-GM09V3-S1E 8x1 VGA/Component/S-Video/Composite Switch with Audio & Ethernet

Control has been tested for conformance to safety regulations and requirements, and has

been certified for international use. However, like all electronic equipments, the

AV-GM09V3-S1E should be used with care. Please read and follow the safety instructions to

protect yourself from possible injury and to minimize the risk of damage to the unit.

●Follow all instructions and warnings marked on this unit.

●Do not attempt to service this unit yourself, except where explained in this manual.

●Provide proper ventilation and air circulation and do not use near water.

●Keep objects that might damage the device and assure that the placement of this unit is on a

stable surface.

●Use only the power adapter and power cords and connection cables designed for this unit.

●Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the

device before cleaning.

TABLE OF CONTENTS

INTRODUCTION.................................................................................................................1

FEATURES.........................................................................................................................1

PACKAGE CONTENTS......................................................................................................1

SPECIFICATIONS..............................................................................................................2

PANEL DESCRIPTIONS.....................................................................................................3

CHANNEL CONTROL ........................................................................................................4

HARDWARE INSTALLATION.............................................................................................8

CONNECTION DIAGRAM ..................................................................................................8

PIN DEFINITION.................................................................................................................9

WARRANTY .....................................................................................................................10

INTRODUCTION

The AV-GM09V3-S1E 8x1 VGA/Component/S-Video/Composite Switch with Audio & Ethernet

Control receives and amplifies up to 8 VGA inputs, perfectly switches the desired input to the VGA

equipped monitor or receiver. The switch supports VGA video up to 350MHz. The re-transmitted

video quality is guaranteed and the longest transmission is up to 65m (210ft). Therefore,

AV-GM09V3-S1E offers the most convenient and cost effective means for swift switch of high quality

PC graphics and HDTV videos with crystal clear audio in the market. With equipped audio switch,

AV-GM09V3-S1E is ready to be as a switch with stereo audio and ideally for boardroom, showroom,

and exhibition. The control of AV-GM09V3-S1E is versatile and easier through the IR remote control,

the push button on front panel, Ethernet control, or the RS-232 control on rear panel.

FEATURES

●VGA/component/S-video/composite switch with 350MHz bandwidth

●Up to 8 graphics/video inputs

●LED indication

●Ethernet accessible

●Automatic detection of the VGA/component input

●Amplified video output with transmission length up to 65m (210-ft)

●Multiple control by IR remote, push button, Ethernet, and RS-232 control

●1U rack mountable

PACKAGE CONTENTS

●1x AV-GM09V3-S1E

●1x DC 5V 4A in-line with C7 power cord

●1x IR Remote control

●1x Rack-mounting ear set

●1x Installation software CD

●1x User Manual

SPECIFICATIONS

Model Name

AV-GM09V3-S1E

Technical

Role of usage

8x1 switch

Supported

input/output

VGA / Component / S-video / Composite*

Video bandwidth

350MHz

Video support

1080p60, WUXGA [1920x1200@60] & UXGA [1600x1200@60] or even

higher

Transmission

UXGA [1600x1200] –65m [210ft]

Audio support

Analog stereo

Input

8x VGA [component/s-video/composite through adapters]

8x 3.5mm analog stereo audio

1x RS-232

Output

1x VGA [component / s-video / composite through adapters]

1x 3.5mm analog stereo audio

VGA connector

HD-15 [15-pin D-sub female]

RS-232 connector

DE-9 [9-pin D-sub female]

3.5mm connector

Earphone jack for analog stereo audio

RJ-45 connector

WE/SS 8P8C

Input selection

IR remote / push button / RS-232 control / Ethernet

IR remote control

Electro-optical characteristics: = 25° / Carrier frequency: 36-40kHz

Mechanical

Dimensions

[L x W x H]

Model

1RU –440 x 66 x 44mm [1'5.3" x 2.6" x 1.7"]

Package

510 x 230 x 70mm [1'8" x 9.1" x 2.8"]

Carton

510 x 410 x 252mm [1'8" x 1'4" x 10"]

Weight

Model

1100g [2.4 lbs]

Package

1890g [4. 2lbs]

Fixedness

1RU rack-mount with ears

Power supply

5V 4A DC

Power consumption

13 Watt [max]

Operation temperature

0~40°C [32~104°F]

Storage temperature

-20~60°C [-4~140°F]

Relative humidity

20~90% RH [no condensation]

PANEL DESCRIPTIONS

Front Panel

1.Infrared sensor

2.LED indicator for power

3.LED indicator for VGA input #1 ~ #8

Rear Panel

4.3.5mm audio socket for audio source #1 ~ #8

5.3.5mm audio socket for selected audio output

6.VGA input source #1 ~ #8

7.Selected VGA output

8.Etherent Control

9.RS-232 control port

10.5V DC power jack

* Component and composite input/output can be done by using the optional accessory

VGA-to-Component adapter to connect to the VGA socket. However, for S-Video

input/output, please find a VGA-to-S-video adapter available in the market to fulfill you need.

CHANNEL CONTROL

IR remote cotrol

Key

Code

Function

0x03

Turn on/off AV-GM09V3-S1E

0x02

Switch from the selected input to the next

input channel

0x01

Switch from the selected input back to the

prior input channel

0x04

Select INPUT 1 to be the input source

0x05

Select INPUT 2 to be the input source

0x06

Select INPUT 3 to be the input source

0x07

Select INPUT 4 to be the input source

0x08

Select INPUT 5 to be the input source

0x09

Select INPUT 6 to be the input source

0x0a

Select INPUT 7 to be the input source

0x1b

Select INPUT 8 to be the input source

0x1f

Reserved

0x0c

Turn on/off AUTO DETECT which allows

the input source can be automatically

changed once the selected input is

disconnected

0x0d

Reserved

0x0e

Reserved

Software Control via the RS-232 or Ethernet port

Scan Device

Automatically scan the COM port connected to AV-GM09V3-S1E

String table

Freely setting the name of the inputs

AUTO DETECT function is used for checking input signal existed or not. Enable this

function will make the output port switching to the next available input in sequential

order when the currently selected input signal is lost. Disable this function will make the

AV-GM09V3-S1E stay at the currently selected input even if the input signal is lost.

Ethernet Setting

Ethernet

Users have to define Ethernet properties through RS-232 for the matrix. All the

parameters for Ethernet have to be saved into the Switcher by clicking on “Write To

Device” button.

Communication

Users can choose the control interface between Switcher and PC host.

1. Please notice that Ethernet control has a higher priority than RS-232. If RS-232 and

Ethernet controls come from 2 different hosts, commands may coincide and in this case,

commands from Ethernet will be effective immediately no matter whether commands

from RS-232 are accurately sent and executed!

2. Initial or any change to Ethernet settings, users MUST power cycle VGA matrix in order

to get the network settings effective!

HARDWARE INSTALLATION

1. Connect VGA/component/s-video/composite display/projector to the output of AV-GM09V3-S1E.

2. Connect the VGA/component/s-video/composite source devices to the inputs of

AV-GM09V3-S1E.

3. Plug power adapter cable into 5V DC power jack.

4. Use IR remote or push button on the front panel to switch between inputs, or connect a

computer through RS-232 port to switch the VGA/component/s-video/composite input sources.

CONNECTION DIAGRAM

Tabla de contenidos

Otros manuales de Cambiar de SIIG

SIIG

SIIG 4000-MT Manual de usuario

SIIG

SIIG CE-KV0011-S1 Manual de usuario

SIIG

SIIG AV-GM09M3-S1 Manual de usuario

SIIG

SIIG ID-US0411-S1 Manual de usuario

SIIG

SIIG AV-GM04P3-S1-W Manual de usuario

SIIG

SIIG AV-GM09L3-S1 Manual de usuario

SIIG

SIIG CE-KV0G11-S1 Manual de usuario

SIIG

SIIG USB 2.0 4-Port Bay Hub Manual de usuario

SIIG

SIIG USB 2.0 Switch Manual de usuario

SIIG

SIIG FireWire Manual de usuario

SIIG

SIIG USB 3.0 Manual de usuario

SIIG

SIIG US22 Series Manual de usuario

SIIG

SIIG PC Switch 6000 Manual de usuario

SIIG

SIIG CE-H24H11-S1 Manual de usuario

SIIG

SIIG SlimHub 4000P Manual de usuario

SIIG

SIIG JU-SW2212-S1 Manual de usuario

SIIG

SIIG CE-000012-S1 Manual de usuario

SIIG

SIIG AV-GM09Q3-S1 Manual de usuario

SIIG

SIIG MultiView CE-H26311-S1 Manual de usuario

SIIG

SIIG USB 2.0 Switch Manual de usuario

SIIG

SIIG AV-GM04P3-S1 Manual de usuario

SIIG

SIIG AV-GM09G3-S1 Manual de usuario

SIIG

SIIG JU-H42B22-S2 Manual de usuario

SIIG

SIIG Industrial Grade USB Hub Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario