SIIG AV-GM04P3-S1 Manual de usuario

HDMI2.0 over IP Multicast System with video support

P/N: AV-GM04P3-S1

Safety and Notice

The AV-GM04P3-S1 HDMI2.0 over IP Multicast System with video support has been tested for

conformance to safety regulations and requirements, and has been certified for international use.

However, like all electronic equipments, the AV-GM04P3-S1 should be used with care. Please read

and follow the safety instructions to protect yourself from possible injury and to minimize the risk of

damage to the unit.

●Follow all instructions and warnings marked on this unit.

●Do not attempt to service this unit yourself, except where explained in this manual.

●Provide proper ventilation and air circulation and do not use near water.

●Keep objects that might damage the device and assure that the placement of this unit is on a

stable surface.

●Use only the power adapter and power cords and connection cables designed for this unit.

●Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device

before cleaning.

TABLE OF CONTENTS

INTRODUCTION................................................................................................................ 1

FEATURES........................................................................................................................ 1

PACKAGE CONTENTS...................................................................................................... 2

SPECIFICATIONS.............................................................................................................. 2

PANEL DESCRIPTIONS.................................................................................................... 3

Transmitting unit................................................................................................................. 3

Receiving unit..................................................................................................................... 5

CONNECTION DIAGRAM.................................................................................................. 7

IR PASS-THROUGH.......................................................................................................... 8

WARRANTY....................................................................................................................... 9

INTRODUCTION

The AV-GM04P3-S1 HDMI2.0 over IP Multicast System with video support boosts up your

video/audio transmission distance up to 120m(396ft) in UHD 4K2K format. With cost effective Ethernet

cable, users can readily extend UHD sources from DVD players, Blu-ray Disc player, PS3, PC, and any

other HDMI sources broadcasting to distant display monitors including HDMI or DVI enabled TV sets or

LCD PC monitors. In addition, AV-GM04P3-S1 is HDCP compliant, and supports IR and RS-232

pass-through path.

With broadcasting management software and Gigabit Ethernet network switch (supporting IGMP,

Jumbo frame), AV-GM04P3-S1 is a complete UHD video broadcasting solution for digital signage. It can

transmit Full HD 4K2K60 HDMI video broadcasting over IP network. The broadcasting format can be

Point to Point, Point to Many, and Multi-Casting. Multi-casting is based on Managed Gigabit Switch with

802.1Q VLAN function which provides control remotely and so multi video and sources are allowed and

supported.

FEATURES

●Supports HDMI input up to 4K2K@60 4:4:4 8bits

●Supports HDMI output up to 4K2K@30 RGB

●Supports High Dynamic Range (HDR)

●HDMI 2.0a compliant

●HDCP 2.2 compliant

●Flexible and scalable UHD Video Broadcasting by Gigabit Ethernet LAN/Switch

●one to one, one to many & multi-casting broadcasting architecture

●Each transmitter can be multicast up to an unlimited number of displays in video wall

applications or unlimited displays in multicast applications

●Supports full frequency IR signal from 20KHz to 60KHz

●Bi-directional IR path

●Full Duplex RS-232 control up to 115,200 bps through connector

●Up to 1,023 Groups Multi-Casting

●Easy Dip Switch matching for multi-casting group configuration

●Latency: 1080P60: 23ms

●Supports Video Wall function

●Supports 180 and 270 clockwise image rotation

●Supports USB2.0

●Wall mounting housing design for easy and robust installation

PACKAGE CONTENTS

AV-GM04P3-S1-TX

●1x AV-GM04P3-S1-TX

●1x IR blaster cable

●1x 5V2A Power adaptor

●1x User Manual

SPECIFICATIONS

Model Name

AV-GM04P3-S1

Technical

AV-GM04P3-S1 [Tx]

AV-GM04P3-S1 [Rx]

Role of usage

Transmitter [TX]

Receiver [RX]

HDMI compliance

HDMI

HDCP compliance

Yes

Input Video support

HDR 4K2K@60 (4:2:0 10bits) / 4K2K@60 (4:4:4 8bits)

Output Video

support

4K2K@30 (RGB)

Latency

2 frames (33 ms) maximum

HDMI over UTP

transmission [24-bit]

Ultra HD (4K2K60)-120m (396ft) [CAT.X]

Audio support

Surround sound (up to 7.1ch) or stereo digital audio

Input TMDS signal

1.2 Volts [peak-to-peak]

Input DDC signal

5 Volts [peak-to-peak, TTL]

ESD protection

Human body model —±15kV [air-gap discharge] & ±8kV [contact discharge]

IR pass-thru

Full-duplex bi-directional

RS-232 support

Yes

Input

1x HDMI + 2x 3.5mm + 1x USB

1x RJ45 + 1x HDMI + 1x 3.5mm

Output

1x RJ45 + 1x HDMI + 1x 3.5mm

1x HDMI + 2x 3.5mm + 2x USB

In/ Out

1x DIN9

HDMI source control

Controllable via IR pass-through from RX to TX and from TX to RX with IR extenders

IR remote control

Electro-optical characteristics: = 25° / Carrier frequency: 20-60kHz

HDMI connector

Type A [19-pin female]

Min DIN connector

DIN-9

RJ45 connector

WE/SS 8P8C with 2 LED indicators

AV-GM04P3-S1-RX

● 1x AV-GM04P3-S1-RX

● 1x IR receiver cable

● 1x 5V2A Power adaptor

●1x User Manual

● 1x IR receiver cable

● 1x 5V2A Power adaptor

●1x User Manual

3.5mm connector

IR blaster & IR receiver

Mechanical

Housing

Metal enclosure

Dimensions

[L x W x H]

Model

142 x 102 x 28.7mm [5.6" x 4" x 1.1"]

Package

264 x 170 x 77mm[10.3" x 6.7" x 3"]

Carton

430 x 358 x 291mm[1'4" x 1'2" x 11.5"]

Weight

Model

451g [16 oz]

Package

786g [1.7 lbs]

Fixedness

Wall-mounting case with screws

Power supply

5V 2A DC

Power consumption

6 Watts

5 Watts

Operation

temperature

0~40°C [32~104°F]

Storage temperature

-20~60°C [-4~140°F]

Relative humidity

20~90% RH [no condensation]

PANEL DESCRIPTIONS

Transmitting unit ►AV-GM04P3-S1-TX

1. RJ-45: Gigabit Ethernet port

2. HDMI loopout: Connect to a HDMI display with a HDMI male-male cable.

3. HDMI IN: Connects to a HDMI source with a HDMI male-male cable

4. Analog audio line in: Connect to upstream speaker output

5. +5V DC: Connect to 5V DC power supply

6. Power LED indicator

7. Link LED indicator

8. Alarm LED indicator

9. RS-232: Connect to PC serial port with a DSUB-9 male-male cable here

10. IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster

11. IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver

12. Dip Switch: Video channel selection

13. USB: Connect to upstream USB host

14. Dip Switch: RS-232 mode selection, [ON] debug mode; [OFF] bypass mode

Receiving unit ►AV-GM04P3-S1-RX

15. RJ-45: Gigabit Ethernet port

16. HDMI OUT: Connect to a HDMI display with a HDMI male-male cable.

17. HDMI IN: Connects to a HDMI source with a HDMI male-male cable

18. Analog audio line out: Connect to downstream headphone output

19. +5V DC: Connect to 5V DC power supply

20. Power LED indicator

21. Link LED indicator

22. Alarm LED indicator

23. RS-232: Connect to PC serial port with a DSUB-9 male-male cable here

24. IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster

25. IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver

26. Dip Switch: Video channel selection

27. USB(USB 2.0 downstream port): Connect to USB flash driver or other USB devices

28. Dip Switch: RS-232 mode selection, [ON] debug mode; [OFF] bypass mode

Notes: TX/RX group ID dip-switch setting

1. For ID=1~63, please refer the table below to set up (Hardware control)

2. For ID=64~1023, please adjust the DIP switch to ID=0, and the real ID can be decided by

the external software (Software control)

Pin1

Pin2

Pin3

Pin4

Pin5

Pin6

Pin1

Pin2

Pin3

Pin4

Pin5

Pin6

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

↓

↑

CONNECTION DIAGRAM

IR PASS-THROUGH

IR Extenders

IR Blaster

IR Receiver

IR Sockets

IR BLASTER: plug in the IR blaster to emit all IR command signals received from the IR receiver

from the other end to control the devices corresponding to the IR signals.

IR RECEIVER: plug in the IR receiver to receive all IR command signals from the IR remote controls of

the corresponding devices.

Definition of IR Earphone Jack

IR Blaster

IR Receiver

Incorrect placement of IR Blaster and Receiver may result in the failure of the IR

extenders. Please check carefully before plugging in the IR extender to the

respective IR sockets. Warranty will not cover the damage.

CAUTION!

Tabla de contenidos

Otros manuales de Cambiar de SIIG

SIIG

SIIG ID-US0411-S1 Manual de usuario

SIIG

SIIG AV-GM09L3-S1 Manual de usuario

SIIG

SIIG ID-SC0511-S1 Manual de usuario

SIIG

SIIG JU-SW4112 Manual de usuario

SIIG

SIIG 2x1 VGA Switch Manual de usuario

SIIG

SIIG SuperSpeed USB 4-Port Hub Manual de usuario

SIIG

SIIG 2x1 USB DisplayPort KVM Switch with Remote... Manual de usuario

SIIG

SIIG AV-GM04P3-S1-W Manual de usuario

SIIG

SIIG USB 2.0 Switch Manual de usuario

SIIG

SIIG USB 3.0 Manual de usuario

SIIG

SIIG JU-SC0111-S1 Manual de usuario

SIIG

SIIG CE-KV0G11-S1 Manual de usuario

SIIG

SIIG DisplayPort 2-Port KVM Switch Manual de usuario

SIIG

SIIG 1394 Manual de usuario

SIIG

SIIG AV-GM09G3-S1 Manual de usuario

SIIG

SIIG USB 3.0 Manual de usuario

SIIG

SIIG AV-GM09S3-S1 Manual de usuario

SIIG

SIIG USB 2.0 SlimHub 4000P Manual de usuario

SIIG

SIIG CE-KV0612-S1 Hoja de información del producto

SIIG

SIIG CE-KV0011-S1 Manual de usuario

SIIG

SIIG US22 Series Manual de usuario

SIIG

SIIG CE-CM0011-S1 Manual de usuario

SIIG

SIIG US22 Series Manual de usuario

SIIG

SIIG CE-000012-S1 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario