SIIG NN-EC2822-S1 Manual de usuario

FireWire 800 1-Port

ExpressCard/34

Quick Installation Guide

04-0443A

Introducing the FireWire 800 1-Port

ExpressCard/34

The FireWire 800 1-Port ExpressCard/34 adds FireWire 800

(1394b) interface to your ExpressCard equipped

computer.

Features and Benefits

• Provides 1 FireWire 800 (9-pin)

• Supports data transfer rates of 100, 200, 400 and

800Mbps

• Supportshot-swappingandPlug-n-Playconnection

of peripheral devices

• Works with FireWire devices including DV

camcorders, CD-RW/DVD-ROM drives, portable

hard disks, digital cameras and other audio/video

devices

System Requirements

• ExpressCard-enabled notebook with an available

ExpressCard slot

• Windows 2000/XP/Server 2003/Vista

• Mac OS X (10.4.x) or later

Figure 1. Layout

*Note: FireWire devices that have their own power

supply do not require the optional power adapter

to be connected in order to work. However,

non-poweredFireWiredevicesrequirethis optional

power adapter to work. The power adapter can be

purchasedatSIIG'sonlinestore,part# NN-ADA011.

Hardware Installation

General instructions for installing the card are provided

below. Since the design of notebook computers may

vary, refer to your system’s reference manual for further

information, if needed.

Insert the ExpressCard into the ExpressCard slot of your

notebook computer. Make sure it is inserted all the way

in for a solid connection.

Power Adapter Jack*

FireWire 800 port

(9-pin)

PackageContents

•FireWire 800 1-port ExpressCard/34

• Driver CD

• Quick Installation Guide

Layout

Driver Installation

This section provides information on how to install the

FireWire 800 1-Port ExpressCard/34 drivers.

Windows 2000

Windows2000automatically installs it's built-in FireWire

400 driver for the FireWire 800 1-Port ExpressCard/34. To

get the full speed out of this controller, install the Firewire

800 driver using the directions below.

1. Insert the driver CD. Click Start, Run. Type

D:\setup.exe, click OK. (Change D: to match the

drive letter of your CD-ROM)

2. At the Welcome screen, click Next.

3. At the License Agreement screen, click Yes.

4. Type in your customer information, then click Next.

5. At the Destination Location screen, click Next.

6. Select Complete, then click Next.

7. At Program Folder screen, click Next.

8. AttheDigital Signature screen, click Yes three times,

then click Finish.

9. Select the restart Windows option, then click Finish.

Windows XP

Windows XP automatically installs it's built-in FireWire

400 driver for the FireWire 800 1-Port ExpressCard/34. To

get the full speed out of this controller,install the Firewire

800 driver using the directions below.

1. Insert the driver CD. Click Start, Run. Type

D:\setup.exe, click OK. (Change D: to match the

drive letter of your CD-ROM)

2. At the Welcome screen, click Next.

3. At the License Agreement screen, click Yes.

4. Type in your customer information, then click Next.

5. At the Destination Location screen, click Next.

6. Select Complete, then click Next.

7. At Program Folder screen, click Next.

8. At the Hardware Installation screen, click Continue

Anyway three times, then click Finish.

9. Select the restart Windows option, then click Finish.

Windows Server 2003

Windows Server 2003 automatically installs it's built-in

FireWire 400 driver for the FireWire 800 1-Port

ExpressCard/34. To get the full speed out of this controller,

install the Firewire 800 driver using the directions below.

1. Insert the driver CD. Click Start, Run. Type

D:\setup.exe, click OK. (Change D: to match the

drive letter of your CD-ROM)

2. At the Welcome screen, click Next.

3. At the License Agreement screen, click Yes.

4. Type in your customer information, then click Next.

5. At the Destination Location screen, click Next.

6. Select Complete, then click Next.

7. At Program Folder screen, click Next.

8. At the Security Alert box, click Yes. (Click Yes two

times for 2003 Standard Edition)

9. At the Hardware Installation screen, click Continue

Anyway two times (click Continue Anyway three

times for 2003 Standard Edition), then click Finish.

10. Select the restart Windows option, then click Finish.

Windows Vista

WindowsVista automatically installsit'sbuilt-inFireWire

400 driver for the FireWire 800 1-Port ExpressCard/34. To

get the full speed out of this controller,install the Firewire

800 driver using the directions below.

1. Insert the driver CD. Click Start, Run. Type

D:\setup.exe, click OK. (Change D: to match the

drive letter of your CD-ROM)

2. Click Allow.

3. At the Welcome screen, click Next.

4. At the License Agreement screen, click Yes.

5. Type in your customer information, then click Next.

6. At the Destination Location screen, click Next.

7. Select Complete, then click Next.

8. At the Program Folder screen, click Next.

9. At the Windows Security box, click Install this

driversoftwareanywayfourtimes,then clickFinish.

10. Select the restart Windows option, then click Finish.

Verify Windows Installation

1. Right click My Computer, click Manage, then click

Device Manager.

2. Double click 1394 Bus host controllers. IEEE 1394b

(FireWire 800) adapter should be displayed.

Mac OS X (10.4.x) or later

Mac OS will automatically detect and install the correct

driver for the FireWire 800 1-port ExpressCard/34.

No additional driver is necessary.

To Verify Mac OS Installation

Check System Profiler to verify successful installation.

1. Click Go, then Utilities.

2. Double click System Profiler.

3. Click FireWire and another FireWire Bus should be

displayed.

Removing the ExpressCard

Stop the ExpressCard before removing it from the

ExpressCard slot.

Windows

1 The utility is located by the system clock.

For Windows 2000: Click the Unplug or Eject

Hardware icon. Click Remove PCI standard

PCI-to-PCI bridge.

For Windows XP/Server 2003/Vista: Click the Safely

Remove Hardware icon. Click Safely remove PCI

standard PCI-to-PCI bridge.

2. Wait for the confirmation box, then remove the

ExpressCard from the ExpressCard slot.

Mac OS

The utility is located by the system clock.

1. Click the monitor icon, then choose Power Off

Card.

2. You can now remove the ExpressCard from the

ExpressCard slot.

Connecting Devices

General driver installation steps are provided below.

Please review your device's user manual for more details.

Windows 2000

1. At the Found New Hardware Wizard, click Next.

2. Select Search for a suitable driver..., then click Next.

3. Uncheck all check boxes, then click Next.

4. Click Next, then click Finish.

Windows XP

1. At the Found New Hardware Wizard,

For XP w/SP2 or later

Select No, not this time, then click Next.

For XP w/SP1 or earlier

Go directly to step #2.

2. SelectInstalltheSoftwareAutomatically,clickNext.

3. Click Continue Anyway. (Skip if not prompted)

4. Click Finish to complete the installation.

Server 2003

1. At the Found New Hardware Wizard,

For 2003 w/SP1 or later

Select No, not this time, then click Next.

For 2003 no service pack installed

Go directly to step #2.

2. SelectInstalltheSoftwareAutomatically,clickNext.

3. At the Security Alert box click Yes, or the Hardware

Installation box click Continue Anyway, then click

Finish to complete the installation.

Windows Vista

Windows Vista will automatically detect and install

most FireWire devices when connected. However, for

devices that do not install automatically, follow the steps

below to complete the installation.

1. Click Locate and install driver software.

2. Click Continue to complete the installation.

Mac OS

MacOSwillautomatically detectandinstallmostFireWire

devices when connected. For devices that do not install

automatically, additional drivers may be required. Refer

to the device's users manual for more information.

ubSwitch Utility (Windows only)

In order to use a DV camcorder with this controller,

Microsoft's FireWire 400 driver must be installed in the

system. We have supplied an easy to use utility that

allows switching between Microsoft's driver and the

FireWire 800 driver. Before using this utility, unplug all

devices from the FireWire 800 1-Port ExpressCard/34.

1. Click Start, Programs, Unibrain ubcore, Tools then

ubSwitch.

2. Right click the ubSwitch icon located in the system

tray by the clock.

3. Click the 1394 Adapter that you want to switch, then

click on Microsoft 1394 Drivers.

Note: If your system has multiple 1394 adapters

installed, make sure that you click on the 1394

adapter that the camcorder will be plugged into.

4. Windows will display an information box when the

driver is ready for use. It may take a few seconds for

this box to appear.

Note: To switch back to the FireWire 800 driver,

follow the same procedures, but in step 3 instead of

clickingonMicrosoft1394Drivers, clickonUnibrain

1394 Drivers.

Blank Page

Tabla de contenidos

Otros manuales de Hardware de computadora de SIIG

SIIG

SIIG DP FireWire 800 PCIe Manual de usuario

SIIG

SIIG SC-SAEE12-S1 Manual de usuario

SIIG

SIIG NN-403P12 Manual de usuario

SIIG

SIIG eSATA II PCIe i/e Manual de usuario

SIIG

SIIG DP PCI-to-PS/2 Manual de usuario

SIIG

SIIG FireWire Dual-Port CardBus Manual de usuario

SIIG

SIIG SC-SAE312-S3 Manual de usuario

SIIG

SIIG JJ-E02111-S1 Manual de usuario

SIIG

SIIG NN-E20022-S1 Manual de usuario

SIIG

SIIG DP SoundWave 4 Channel PCI Manual de usuario

SIIG

SIIG NN-8CB212-S1 Manual de usuario

SIIG

SIIG CyberParallel Dual Manual de usuario

SIIG

SIIG Serial ATA 4-Channel PCI Manual de usuario

SIIG

SIIG SC-SAE512-S1 Manual de usuario

SIIG

SIIG USB 2.0 9-in-1 Bay R/W Manual de usuario

SIIG

SIIG 1394 Dual-Port CardBus Manual de usuario

SIIG

SIIG FireWire 800 + Hi-Speed USB Combo Manual de usuario

SIIG

SIIG USB 2.0+1394 DV Kit Manual de usuario

SIIG

SIIG IO1037 Manual de usuario

SIIG

SIIG DP FireWire 800 PCIe Manual de usuario

SIIG

SIIG JU-PCM422-S2 Manual de usuario

SIIG

SIIG SATA II-150 PCI Manual de usuario

SIIG

SIIG UltraATA 100 Pro Manual de usuario

SIIG

SIIG SoundWave 5.1 PCI-LP Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario