1Overview................................................................1
1.1 Additional Support Documentation.......................1
1.2 Sightline Software Requirements ..........................1
1.2.1 FPGA - 1500-OEM ..................................................1
1.3Third Party Software ..............................................1
2Interface Boards and Adapters ..............................1
3Hardware Connections...........................................2
3.1 1500-OEM Tau Camera Bench Setup.....................2
3.2 3000-OEM Tau Camera Bench Setup.....................3
3.3 4000-OEM Tau Camera Bench Setup.....................5
3.4 1500-OEM Boson Camera Bench Setup.................6
3.5 3000-OEM Boson Camera Bench Setup.................7
3.6 4000-OEM Boson Camera Bench Setup.................8
4FLIR Neutrino Camera............................................9
4.1 Hardware Bench Setup 1500-OEM ........................9
4.2 Hardware Bench Setup 3000-OEM ......................10
5Configuration Settings..........................................12
5.1 Acquisition Settings..............................................12
5.2 Additional Configuration Notes ...........................13
6Camera Control....................................................13
6.1 TCP Passthrough Setup ........................................13
6.2 Tau Cameras.........................................................13
6.3 Tau SWIR Camera.................................................14
6.4 Boson Cameras - FPC/FFC ....................................15
7NUC/FFC Command .............................................16
7.1 Tau and Quark Cameras.......................................16
7.1.1 1500-OEM or 3000-OEM: Cam0/Vin0/Serial2 .....16
7.1.2 3000-OEM Cam2 / Vin1 / Serial3.........................17
7.2 Boson Cameras - FPC/FFC....................................18
7.2.1 1500-OEM, 3000-OEM Cam0/Vin0, 4000-OEM...18
7.2.2 3000-OEM Cam2 / Vin1 .......................................18
8RHP-BOSON Interface Module - FLIR Boson
Camera.................................................................19
8.1 Configuration Example - 1500-OEM ....................19
8.1.1 Hardware Connection..........................................19
8.1.2 Panel Plus Configuration......................................20
8.1.3 FPC/FFC Camera Configuration............................20
8.2 RHP-BOSON Interface Module - 4000-OEM USB
Connection...........................................................21
9VPC Accessory - FLIR Boson Camera....................22
9.1 VPC Accessory with USB Cable - 4000-OEM ........22
9.2 Enable Serial Passthrough....................................22
9.3 VPC Accessory with Analog Cable........................23
9.4 Configuration Settings .........................................23
10 Troubleshooting...................................................26
10.1 Cables and Hardware - SLA-FPC-BOSON-E...........26
10.2 Direct Connection to Tau Camera - 1500 OEM....26
10.3 Boson Video or Serial Communication Issues -
FPC/FFC................................................................27
10.4 Reset Boson Cameras to Factory Defaults...........27
10.5 Boson 640 Framerate Issues................................28
10.6 Questions and Additional Support.......................28
Appendix A - BT.656 Mode - Tau Cameras .....................29
CAUTION: Alerts to a potential hazard that may result in personal injury, or an unsafe practice that causes damage to the equipment
if not avoided.
IMPORTANT: Identifies crucial information that is important to setup and configuration procedures.
Used to emphasize points or reminds the user of something. Supplementary information that aids in the use or understanding of the
equipment or subject that is not critical to system use.
