Siemens Sitrans F Series Manual de usuario

A5E03922778-006, 12/2013 1

SITRANS F

Coriolis Flowmeters

SITRANS FCT030 transmitter

Quick Start

Before installing, including in hazardous areas, refer to the Operating Instructions on the internet or on the SITRANS F

documentation CD-ROM which is included in the product package. They contain detailed safety regulations, information and

specifications which must be observed when installing. Documentation and approvals can be found on the internet:

Flow documentation (http://www.siemens.com/flowdocumentation)

CAUTION

Proper handling

Correct, reliable operation of the device requires proper transport, storage, positioning and assembly. The device must be

carefully operated and maintained. Only qualified personnel should install or operate this device.

Items supplied

Compact system

●SITRANS FC430 sensor and compact mounted

transmitter

●Packet of cable glands

●Quick Start guide

●CD containing software, certificates and device manuals

Remote system

With M12 connection

●SITRANS FCS400 sensor

●SITRANS FCT030 transmitter with M12 socket assembled

●Mounting bracket and cushion pad

●Sensor cable with M12 connector

●Packet of cable glands

●Quick Start guide

●CD containing software, certificates and device manuals

How to install

SITRANS FCT030 transmitter

2A5E03922778-006, 12/2013

With terminal housing

●SITRANS FCS400 sensor

●SITRANS FCT030 transmitter with terminal housing

assembled

●Mounting bracket and cushion pad

●Sensor cable

●Packet of cable glands

●Quick Start guide

●CD containing software, certificates and device manuals

Note

Supplementary information

Supplementary product and production specific certificates are included on the SensorFlash®SD card in the transmitter

socket.

Note

Scope of delivery may vary, depending on version and add-ons. The contents list in the product package lists all included

parts.

Note

Sensor installation

The installation of the FCS400 sensor is described in the SITRANS FCS400 Quick Start (A5E03649755).

Remote mounting

Wall mounting

1. Prepare holes with aid of mounting bracket.

2. Fasten mounting bracket with cushion pad to wall (torque 10 Nm).

Pipe mounting

1. Mount mounting bracket with cushion pad on pipe using fastening brackets/U-bolts and supplied pipe adaptor. Note: U-

bolts and other miscellaneous hardware are not supplied with the flowmeter.

2. Tighten nuts (torque 10 Nm).

SITRANS FCT030 transmitter

A5E03922778-006, 12/2013 3

Note

Hygienic applications

If the device is wall or pipe-mounted in a hygienic application, always use domed nuts.

Mounting the transmitter

1. Remove screw from mounting bracket.

2. Mount transmitter on mounting bracket taking care that the flutes on the mating faces are correctly engaged.

3. Firmly tighten screw on mounting bracket (torque: 25 Nm).

Turning the transmitter

In a remote configuration, the transmitter can be turned horizontally and vertically. In a compact configuration, the transmitter

can be turned horizontally only.

Horizontal rotation

1. Unscrew cap from lock screw.

2. Loosen lock screw at transmitter pedestal using 5 mm Allen key.

3. Carefully rotate transmitter into desired position.

4. Firmly tighten lock screw (torque: 10 Nm).

5. Replace cap onto lock screw (torque: 10 Nm).

SITRANS FCT030 transmitter

4A5E03922778-006, 12/2013

Vertical rotation

1. Loosen locking cap at end of mounting bracket by three turns.

2. Carefully loosen and rotate transmitter into desired position (15° steps).

3. Firmly tighten locking cap (torque: 25 Nm).

Turning the local display

The local display can be turned in steps of 30° in order to optimize the viewing angle.

1. Remove lid lock screw of display cover.

2. Remove display cover.

3. Use a small screwdriver or blade to loosen the three retaining clips within the transmitter.

4. Carefully pull out local display.

5. Turn display into desired position.

6. Carefully push display back into housing. Use a small screwdriver or blade to open the three retaining clips within the

transmitter when pushing the LUI home.

7. Remove o-ring from lid.

SITRANS FCT030 transmitter

A5E03922778-006, 12/2013 5

8. Reinstate display cover until mechanical stop. Wind back lid by one turn.

9. Mount o-ring by pulling it over the display cover and turn display cover until you feel friction from the o-ring on both sides.

Wind display cover further by one quarter of a turn to seal on the o-ring.

10. Reinstate and tighten lid lock screw.

Connecting

WARNING

Access to terminal space

As long as the device is energized, the lid of the housing on the sensor connection area may only be opened by qualified

personnel.

Before removing the terminal cover, the auxiliary power must be switched off from all poles.

Following installation, the terminal cover must be screwed back on again.

1. Remove blind plugs where required and mount cable glands.

①

Input/output connection (channels 2 to 4)

②

Power supply connection

③

Current output/HART connection (channel 1)

2. Remove lid lock screw for terminal connections lid.

3. Remove lid for terminal connections.

SITRANS FCT030 transmitter

6A5E03922778-006, 12/2013

Application terminals

A label showing the configuration is placed at the back of the terminal connections lid.

①

Power supply connections

L/+

Terminal 1

N/-

Terminal 2

Terminal 3

②

Key to symbols

Configured as active input/output

Configured as passive input/output

Connected as normally open contact

Connected as normally closed contact

③

Updates (to be filled in on firmware and hardware updates)

④

Device configuration date

⑤

Initial firmware and hardware revisions

⑥

Configuration of channels 1, 2, 3 and 4

Figure 3-1 Configuration label

SITRANS FCT030 transmitter

A5E03922778-006, 12/2013 7

(1)

L/+

Line

(2)

N/-

Neutral

(3)

Ground

(4)

Ca+

Used in current output active configuration

(5)

Used in current output active and passive configuration

(6)

Cp-

Used in current output passive configuration

(7)

---

Not used

(8)

IO2+

Signal output channel 2 positive

(9)

IO2

Signal output channel 2 common

(10)

IO2-

Signal output channel 2 negative

(11)

IO3+

Input/output channel 3 positive

(12)

IO3

Input/output channel 3 common

(13)

IO3-

Input/output channel 3 negative

(14)

IO4+

Input/output channel 4 positive

(15)

IO4

Input/output channel 4 common

(16)

IO4-

Input/output channel 4 negative

Figure 3-2 Terminal layout

Wiring tool

Use the wiring tool for connecting the cables.

The wiring tool is located in the application terminal space.

Wiring tool location

How to use the wiring tool

SITRANS FCT030 transmitter

8A5E03922778-006, 12/2013

1. Insert wiring tool hook into receptor slot.

2. Press wiring tool wedge into top slot to spread clamp plates.

3. Insert wire.

4. Release wiring tool.

Power supply

1. Flip open power supply terminal protection cover.

2. Remove cap and ferrule from cable gland and slide onto cable.

3. Push cable through open gland and cable path.

4. Restore ferrule and tighten cap to lightly hold cable in place.

5. Connect ground to terminal and power to terminals L/+ and N/- using wiring tool in the manner shown below at right.

①

L/+

②

N/-

③

SITRANS FCT030 transmitter

A5E03922778-006, 12/2013 9

AC connection

DC connection

Power: 100 to 240 VAC +10/-15%, 47 to 63 Hz

Power: 20 to 27 VDC +10/-10%

6. Close and latch power supply terminal protection cover.

7. Tighten cable gland.

Current output/HART (channel 1)

1. Remove cap and ferrule from cable gland and slide onto cable.

2. Push cable through open gland and cable path.

3. Restore ferrule and tighten cap to lightly hold cable in place.

4. Signal cable screen is folded back over outer sheath and grounded beneath cable clamp.

5. Connect wires to terminals using wiring tool.

Active current output

Passive current output

⑤

⑥

Cp-

④

Ca+

⑤

Active current output

Passive current output

6. Tighten cable gland.

Note

Active or passive current output is preselected at ordering.

Note

Load

Current output (channel 1): < 500 Ω (HART ≥ 230 Ω)

SITRANS FCT030 transmitter

10 A5E03922778-006, 12/2013

Inputs and outputs (channels 2 to 4)

1. Remove cap and ferrule from cable gland and slide onto cable.

2. Push cable through open gland and cable path.

3. Restore ferrule and tighten cap to lightly hold cable in place.

4. Fold signal cable screen back over outer sheath and ground beneath cable clamp.

5. Connect wires to terminals using wiring tool.

Active current output

Passive current output

⑫

IO[3] (common)

⑬

IO[3]- (passive)

⑪

IO[3]+ (active)

⑫

IO[3] (common)

Termination example for channel 3

6. Tighten cable gland.

Otros manuales para Sitrans F Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Transmisor de Siemens

Siemens

Siemens SITRANS P500 Guía del administrador

Siemens

Siemens SITRANS LR560 Manual de usuario

Siemens

Siemens SITRANS LR560 Manual de usuario

Siemens

Siemens SITRANS P LH300 Guía del administrador

Siemens

Siemens SITRANS FUS060 PA Manual de usuario

Siemens

Siemens SITRANS L Series Manual de usuario

Siemens

Siemens sitrans tr200 Manual de usuario

Siemens

Siemens SITRANS 7MF03.0 Guía del administrador

Siemens

Siemens SITRANS LR260 Manual de instrucciones

Siemens

Siemens SITRANS P200 Manual de usuario

Siemens

Siemens SITRANS F C MASS 6000 IP67 Manual de usuario

Siemens

Siemens Sitrans LR250 Guía del administrador

Siemens

Siemens SITRANS TF280 WirelessHART Manual de usuario

Siemens

Siemens SITRANS Probe LU240 Guía del administrador

Siemens

Siemens 5WK4 3402 Manual de usuario

Siemens

Siemens SITRANS TH400 Manual de usuario

Siemens

Siemens SITRANS P series Instrucciones de funcionamiento

Siemens

Siemens 7MF4333 series Manual de usuario

Siemens

Siemens sitrans tr300 Manual de usuario

Siemens

Siemens SITRANS F M MAG 8000 Manual de usuario

Siemens

Siemens SITRANS L Series Manual de usuario

Siemens

Siemens SITRANS P series Manual de usuario

Siemens

Siemens TRANSMAG 2 Manual de usuario

Siemens

Siemens SITRANS L Manual de usuario

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario