Siemens SIMATIC ET 200S Manual de usuario

RGB ELEKTRONIKA AGACIAK CIACIEK

SPÓŁKA JAWNA

Jana Dlugosza 2-6 Street

51-162 Wrocław

Poland

biuro@rgbelektronika.pl

+48 71 325 15 05

www.rgbautomatyka.pl

www.rgbelektronika.pl

DATASHEET

www.rgbautomatyka.pl

www.rgbelektronika.pl

OTHER SYMBOLS:

6ES7 151-1AA04-0AB0

SIEMENS

YOUR

PARTNER IN

MAINTENANCE

At our premises in Wrocław, we have a fully equipped servicing facility. Here we perform all the repair

works and test each later sold unit. Our trained employees, equipped with a wide variety of tools and

having several testing stands at their disposal, are a guarantee of the highest quality service.

OUR SERVICES

ENCODERS

SERVO

DRIVERS

LINEAR

ENCODERS

SERVO AMPLIFIERS

CNC

MACHINES

MOTORS

POWER

SUPPLIERS

OPERATOR

PANELS

CNC

CONTROLS

INDUSTRIAL

COMPUTERS

PLC

SYSTEMS

Repair this product with RGB ELEKTRONIKA ORDER A DIAGNOSIS ∠

Buy this product at RGB AUTOMATYKA BUY ∠

Preface, Contents

Product Overview 1

Brief Instructions on

Commissioning ET 200S 2

Configuration Options 3

Installation 4

Wiring and Fitting 5

Commissioning and Diagnostics 6

General Technical Specifications 7

Interface Modules 8

Terminal Modules 9

Power Modules 10

Digital Electronic Modules 11

Analog Electronic Modules 12

4 IQ-SENSE 13

RESERVE Modules 14

Appendices

Glossary, Index

Edition 12/2004

EWA-4NEB 780602402-12

ET 200S

Distributed I/O System

Manual

SIMATIC

This manual is part of the documentation

package with the order number

6ES7151-1AA10-8BA0

The following supplement is part of this documentation:

No. Designation Drawing number Edition

1 Product Information A5E00352937-02 01/2005

2 Product Information A5E00437368-01 04/2005

!Danger

indicatesthat death, severe personal injury or substantial property damage will result if proper precautions

are not taken.

!Warning

indicates that death, severe personal injury or substantial property damage can result if proper

precautions are not taken.

!Caution

indicates that minor personal injury can result if proper precautions are not taken.

Caution

indicates that property damage can result if proper precautions are not taken.

Notice

draws your attention to particularly important information on the product, handling the product, or to a

particular part of the documentation.

Qualified Personnel

Only qualified personnel should be allowed to install and work on this equipment. Qualified persons are

defined as persons who are authorized to commission, to ground and to tag circuits, equipment, and

systems in accordance with established safety practices and standards.

Correct Usage

Note the following:

!Warning

This device and its components may only be used for the applications described in the catalog or the

technical description, and only in connection with devices or components from other manufacturers which

have been approved or recommended by Siemens.

This product can only function correctly and safely if it is transported, stored, set up, and installed

correctly, and operated and maintained as recommended.

Trademarks SIMATIC, SIMATIC HMIand SIMATIC NETare registered trademarks of SIEMENS AG.

Third parties using for their own purposes any other names in this document which refer to trademarks

might infringe upon the rights of the trademark owners.

Safety Guidelines

This manual contains notices intended to ensure personal safety, as well as to protect the products and

connected equipment against damage. These notices are highlighted by the symbols shown below and

graded according to severity by the following texts:

We have checked the contents of this manual for agreement

with the hardware and software described. Since deviations

cannot be precluded entirely, we cannot guarantee full

agreement. However, the data in this manual are reviewed

regularly and any necessary corrections included in

subsequent editions. Suggestions for improvement are

welcomed.

The reproduction, transmission or use of this document or its

contents is not permitted without express written authority.

Offenderswill be liable for damages. All rights, including rights

created by patent grant or registration of a utility model or

design,are reserved.

Siemens AG

Bereich Automation and Drives

Geschaeftsgebiet Industrial Automation Systems

Postfach 4848, D-90327 Nuernberg SiemensAG 2004

Technical data subject to change.

Siemens Aktiengesellschaft EWA-4NEB 780602402-12

iii

ET 200S Distributed I/O System

EWA-4NEB 780602402-12

Preface

Purpose of the Manual

The information in this manual is intended to enable you to operate the ET 200S

Distributed I/O System

•as a DP slave on the PROFIBUS DP

•as a PROFINET I/O device on PROFINET

Required level of knowledge

Knowledge of the field of automation engineering is required to understand the

manual.

Scope of the manual

This manual is valid for the components of the ET 200S distributed I/O system

specified in Appendix A.

This manual contains a description of the components that were valid at the time

the manual was published. We reserve the right to enclose a Product Information

bulletin containing up-to-date information about new components and new versions

of components.

Changes since the previous version

The following changes/additions have been made since the previous version of the

manual:

•enhanced functions in the IM151-1 STANDARD and IM151-1 FO STANDARD

interface modules

•4AI I 2WIRE Standard analog electronic module added

Preface

ET 200S Distributed I/O System

EWA-4NEB 780602402-12

Certification

See Section 7.1 Standards, certificates and approvals

CE Mark of Conformity

See Section 7.1 Standards, certificates and approvals

Identification for Australia (C-tick mark)

See Section 7.1 Standards, certificates and approvals

Standards

See Section 7.1 Standards, certificates and approvals

Preface

ET 200S Distributed I/O System

EWA-4NEB 780602402-12

Position in the information landscape

The following list shows a summary of the documentation packages or manuals

for the ET 200S:

•

Installing and wiring the ET 200S

•

Commissioning and

diagnostics for the ET 200S

•

Technical specifications of the

IM151-1, digital

and analog electronic modules

•

Order numbers for the ET 200S

ET 200S distributed

I/O system

ET 200S

Process-Related

Functions

•

1Count 24V/100kHz

•

1Count 5V/500kHz

•

1SSI

•

2PULSE

ET 200S IM151-7 CPU interface module

and operation list

SIMATIC ET 200S motor starter

fail-safe motor starter

SIGUARD safety equipment

•

Installing and wiring

motor starters

•

Commissioning and

diagnostics for motor starters

•

Technical specifications

of motor starters

•

Fail-Safe Motor Starter

•

Safety-integrated SIGUARD

•

Order numbers for motor starters

•

Addressing of the IM151-7 CPU

•

ET 200S with IM151-7 CPU in the

PROFIBUS network

•

Commissioning and diagnostics for the

IM151-7 CPU

•

Technical specifications of the IM151-7 CPU

ET 200S Positioning

•

EM 1STEP 5V/204kHz

•

1POS INC/Digital

•

1POS SSI/Digital

•

1POS INC/Analog

•

1POS SSI/Analog

ET 200S serial interfaces

and modules

•

1SI 3964/ASCII

•

1SI MODBUS/USS

6ES7151-1AA10-8xA0

)

x = language designation for order numbers

The documentation packages or manuals can only be ordered in German and English. In addition, French, Spanish and Italian

are available in the Internet (see Service & Support in the Internet)

PROFINET

System -

Description

•

Basics

of PROFINET

•

Network components

and structures

•

Data interchange

and

communication

•

PROFINET

Engineering

From PROFIBUS

DP to PROFINET IO

•

Differences

•

Blocks

•

System

status lists

•

Diagnostics

ET 200S FC frequency

converter

Operating manual

•

Installation

•

Commissioning

•

Control and regulation processes

•

Protection and monitoring functions

•

Technical specifications

ET 200S FC frequency

converter

list manual

•

Parameter list

•

Function plans

•

Interrupts,

error messages

Preface

ET 200S Distributed I/O System

EWA-4NEB 780602402-12

Note

The ET 200S distributed I/O system manual is included in the

ET 200S FC frequency converter documentation package.

The fail-safe modules are described in the

ET 200S distributed I/O system fail-safe modules manual. This manual and other

manuals for the fail-safe modules can be downloaded from the Internet.

A documentation overview for implementation of the ET 200S as an I/O device is

given below.

PROFINET

PROFINET System Description

Network components SIMATIC S7 and ET 200

Documentation for SIMATIC NET

Documentation for the switches

(e.g. SCALANCE)

Documentation for the IE/PB Link

Integration of PCs

Documentation for the CP 1616

Documentation for SOFTNET PNIO

Documentation for

industrial communications with

programming device/PC

Component-based Automation

Documentation for

Component-based Automation

Documentation for SIMATIC iMap

STEP 7

Documentation for STEP 7

Documentation for NCM

Documentation for CPU 31x3 PN/DP

Documentation for the CPs:

443-1 Advanced and

331-1 Advanced

From PROFIBUS DP to PROFINET IO

You are reading this documentation now:

Documentation for ET 200S

Preface

vii

ET 200S Distributed I/O System

EWA-4NEB 780602402-12

Guide

You can quickly access specific information in the manual by using the following

aids:

•At the start of the manual you will find a complete table of contents and a list of

the diagrams and tables that appear in the manual.

•An overview of the contents of each section is provided in the left-hand column

on each page of each chapter.

•Following the appendices, you will find a glossary in which important technical

terms used in the manual are defined.

•At the end of the manual you will find a comprehensive index enabling rapid

access to the information you are looking for.

•Language identification for the order numbers of the manuals, for example,

6ES7 151-1AA10-8xA0

x is for : A = German,

B = English

Special note

In addition to this manual, you will also need the manual for the DP master or

PROFINET I/O controller (see Appendix A).

Note

You will find a complete list of the contents of the ET 200S manuals in Section1.4

of this manual. We recommend that you begin by reading this section so as to find

out which parts of which manuals are most relevant to you in helping you to do

what you want to do.

Recycling and disposal

Due to the fact that it is low in contaminants, the ET 200S is recyclable. Contact a

certified electronic-waste disposal company to recycle and dispose of your old

equipment in an environmentally-friendly manner.

Preface

viii

ET 200S Distributed I/O System

EWA-4NEB 780602402-12

Contact persons

See product information Technical Support, Contact Persons and Training

Training

See product information Technical Support, Contact Persons and Training

SIMATIC Technical Support

See product information Technical Support, Contact Persons and Training

Service & Support on the Internet

See product information Technical Support, Contact Persons and Training

Otros manuales para SIMATIC ET 200S

Tabla de contenidos

Otros manuales de Sistema de E/S de Siemens

Siemens

Siemens SIMATIC ET 200M Manual de usuario

Siemens

Siemens SIPROTEC 6MD61 Manual de usuario

Siemens

Siemens BANY Agent Guía del administrador

Siemens

Siemens SIMATIC ET 200SP 6ES7134-6GD01-0BA1 Manual de usuario

Siemens

Siemens RXM21.1 Manual de usuario

Siemens

Siemens SIMATIC ET 200eco PN Manual de usuario

Siemens

Siemens Simatic 6DL2804-0 Series Manual de usuario

Siemens

Siemens ZN-31U Manual de usuario

Siemens

Siemens Simatic 6DL2804-1 Series Instrucciones de montaje

Siemens

Siemens SIMATIC ET 200SP Manual de usuario

Siemens

Siemens SIMATIC ET 200SP Manual de usuario

Siemens

Siemens SIMATIC ET 200SP Manual de usuario

Siemens

Siemens SIMATIC ET 200SP Manual de usuario

Siemens

Siemens SIMATIC 505 Manual de usuario

Siemens

Siemens SIMATIC S5 Manual de usuario

Siemens

Siemens Simatic S7-1500 Manual de usuario

Siemens

Siemens SIMATIC PROFINET Manual de lista de piezas

Siemens

Siemens SIMATIC ET 200X Manual de usuario

Siemens

Siemens SIM-16 Manual de usuario

Siemens

Siemens Simatic CFU Guía de inicio rápido

Siemens

Siemens FDCIO222 Manual de usuario

Siemens

Siemens FDCIO223 Guía

Siemens

Siemens SIMATIC ET 200SP Manual de usuario

Siemens

Siemens SIMATIC ET 200SP Manual de usuario

Manuales populares de Sistema de E/S de otras marcas

WAGO

WAGO 750-344 Manual de usuario

Teknim

Teknim TWM-1887 Manual de instrucciones

Intelligent Appliance

Intelligent Appliance IA-2662-E Manual de usuario

BERGHOF

BERGHOF ECC DIO 16/16 Manual de instrucciones

Advantech

Advantech PCM-27J3AU Manual de instalación y operación

Festo

Festo CP-E08-M12-CL Manual de usuario

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manual de usuario

Hitachi

Hitachi HX-RIO3 Series Manual de usuario

NUUO

NUUO SCB-A08 Manual de usuario

M-system

M-system R3Y-RS8 Manual de usuario

jablotron

jablotron JB-110N Manual de usuario

Omron

Omron SYSMAC C200H Manual de usuario

DOLD

DOLD SAFEMASTER M Manual de usuario

ABB

ABB OPT-MF-001 Manual de usuario

Omron

Omron SYSMAC C2000H Manual de usuario

Helmholz

Helmholz TB20 Manual de usuario

ICP DAS USA

ICP DAS USA tM-AD2 Manual de usuario

Automationdirect.com

Automationdirect.com DL305 Manual de usuario