Siemens Simatic VS 710 Manual de usuario

SIMATIC

VS 710

Quick Reference Guide

A5E00032597-02

Edition 11/2001

The reproduction, transmission or use of this document or its

contentsis not permitted without express written authority. Offenders

will be liable for damages. All rights, including rights created by patent

grant or registration of a utility model or design, are reserved.

We have checked the contents of this manual for agreement with the

hardwareand software described. Since deviations cannot be en-

tirely ruled out, we cannot guarantee full agreement. However, the

datain this Quick Reference Guide are reviewed regularly and any

necessary corrections included in subseqeuent editions. Sugges-

tions for improvement are welcome.

Technical data subject to change.

Disclaimer of Liability

Siemens Aktiengesellschaft

A5E00032597

Printed in the Fed. Rep. of Germany

SIMATIC VS710Contents

SIMATIC VS 710

A5E00032597-02 iii

Contents

1 Product Overview 1. . . . . . . . . . . . . . . . . . . . . . . .

1.1 Applications 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 Contents of the Consignment 2. . . . . . . . . . . . . . . . . . . . . . . . . . . .

VS 710 Package 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

VS 710 OEM Package: 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 Accessories 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 VS 710 Hardware 4. . . . . . . . . . . . . . . . . . . . . . . . .

2.1 Hardware Components 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.2 Mounting the VS 710 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Dimensions, Mounting Fixtures 6. . . . . . . . . . . . . . . . . . . . . . . . . .

Mounting Bracket 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lens Socket 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.3 Hardware Interfaces 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.4 Power Supply - Connector Pinout 10. . . . . . . . . . . . . . . . . . . . . . . .

24 VDC Power Supply 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.5 Digital Input / Output - Connector Pinout 12. . . . . . . . . . . . . . . . . .

Wiring Diagram (Digital Input Points) 13. . . . . . . . . . . . . . . . . . . . .

Wiring Diagram (Digital Output Points) 14. . . . . . . . . . . . . . . . . . .

2.6 DP Connector Pinout 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.7 VGA Connector Pinout 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.8 RS232 Connector Pinout 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.9 IDE Flashdisk 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 Connecting the VS 710 19. . . . . . . . . . . . . . . . . . . . .

3.1 Safety Recommendations 19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2 System Environment 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.3 Connection Options 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Function in Configure Mode 21. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Function in Productive Mode 21. . . . . . . . . . . . . . . . . . . . . . . . . . . .

SIMATIC VS710 Contents

iv SIMATIC VS 710

A5E00032597-02

4 Interactive Operation 22. . . . . . . . . . . . . . . . . . . . .

4.1 Keyboard and Floppy Emulation 22. . . . . . . . . . . . . . . . . . . . . . . . .

4.2 HOSTKEY Program 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setup Options 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operator Input to HOSTKEY 23. . . . . . . . . . . . . . . . . . . . . . . . . . .

4.3 Operating DOS 6.22 and SETUP 24. . . . . . . . . . . . . . . . . . . . . . . . .

4.4 Installing older ProVision versions on Your VS 710 25. . . . . . . . . .

5 Technical Specifications 26. . . . . . . . . . . . . . . . . . .

5.1 General Specifications 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.2 Digital I/O Interface 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6 Certification 31. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.1 Certification for the USA and Canada 31. . . . . . . . . . . . . . . . . . . . .

UL/CSA Certification 31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FM Approval 32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.2 Certification for Europe 33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

EMC Guidelines 33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Declaration of Conformity 33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Observing the Setup Guidelines 33. . . . . . . . . . . . . . . . . . . . . . . . . .

SIMATIC VS710Quick Reference Guide

SIMATIC VS 710

A5E00032597-02 1

1 Product Overview

SIMATIC VS 710 is a highly compact stand-alone image processing

system in which the camera, computer, and peripherals are integrated in a

single unit.

SIMATIC VS 710 has the following advantages to offer users who require

an all-in-one image processing system for inspection, monitoring of

production, and parts identification:

•Top-quality image representation and resolution for static and moving

images

•High clock speed for networked decentralized automation solutions

•Continuous remote parts inspection

•Video image can be shown on SVGA monitors

•Digital I/O to programmable controller

•PROFIBUS DP slave functionality with a transmission speed of up to

12 Mbps

•Can be configured by host PC via a serial port or PROFIBUS DP

•Flexible configuration to accommodate new inspection criteria

•ProVision system software is easy to configure, user-friendly and also

offers complete functionality for inspection and recognition

applications.

SIMATIC VS710 Quick Reference Guide

2SIMATIC VS 710

A5E00032597-02

1.1 Applications

SIMATIC VS 710 is suitable for use in all areas, including the electrical,

engineering, electronics, automobile, pharmaceuticals, cosmetics, food, and

packaging industries. The system has a wide range of applications in

product monitoring, quality control, and parts identification.

1.2 Contents of the Consignment

VS 710 is available in two versions. The versions differ only in what is

included along with the basic product.

VS 710 OEM VS 710

6GF1710-2AA 6GF1710-3AA

Configurable using customized

C/C++ programs Configurable using ProVision

6GF8007-1AA0 software package

and higher

VS 710 Package

•VS 710 basic unit with ProVision-run-time software

•Tool diskette 1 with MS-DOS 6.22 1)

•Standard software licence agreement

•Mounting bracket and two M4 fixing screws

•2 Ferrite sleeves

•This hardware manual

•Product Information bulletin

VS 710 OEM Package:

•VS 710 OEM basic unit

•Tool diskette 1 with MS-DOS 6.2.2 1)

•Standard software licence agreement

•2 Ferrite sleeves

•Product Information bulletin

1) The package does not include a complete DOS version.

SIMATIC VS710Quick Reference Guide

SIMATIC VS 710

A5E00032597-02 3

1.3 Accessories

Accessory Order Number

RS232 cable (zero

modem cable) 6ES7901-1BF00-0XA0

Power supply cable 6GF9002-1CA

Digital I/O cable 6GF9002-1CB

DP cable (PROFIBUS

line) 6XV1830-0EH10

PROFIBUS connector 6ES7972-0BA40-0XA0 (without PG socket)

6ES7972-0BB40-0XA0 (with PG socket)

Note

The accessories listed in the above table are not supplied with the device

and must be ordered separately.

Standard accessories are listed in catalog ST70 and ST50.

SIMATIC VS710 Quick Reference Guide

4SIMATIC VS 710

A5E00032597-02

2 VS 710 Hardware

2.1 Hardware Components

VS 710 is made up of the following hardware components:

•Metal casing (dimensions: 65x80x130, color: black) with multiple

mounting options. All ports for communication located on the back

panel of the casing.

•C-mount standard lens socket.

•High-resolution CCD chip (782x582) with square pixels, pixel

identical scanning, offset setting.

used CCD-Chip size: 6.5 mm (H) x 4.8 mm (V)

•Restart-reset, full frame shutter with an exposure range of 1/50 -

1/10000s, half-image and full-image modes.

•Parameter assignment for image formats up to 768x512.

•100 MHz 80486 CPU (AMD) with direct image buffer access

•16 Mbyte main memory DRAM module (SO-DIMM)

•16 Mbyte IDE flashdisk (see Section 2.9)

•256 Kbyte flash EPROM as BIOS memory

•2 Mbyte image buffer

SIMATIC VS710Quick Reference Guide

SIMATIC VS 710

A5E00032597-02 5

2.2 Mounting the VS 710

The VS 710 can be mounted in many different ways, making it highly

versatile and convenient to use.

A number of fixtures (1/4” support socket, M4 screw threads) for mounting

attachments are located on the underside of the metal casing.

Choose whichever mounting option best suits your needs:

•Directly onto the casing using the M4 screw threads

•To the support socket on the casing

•Using the mounting bracket supplied (not included in the VS 710 OEM

package)

Mounting bracket

M4 screw threads

1/4” support socket

Figure 1 Mounting Fixtures on the VS 710

SIMATIC VS710 Quick Reference Guide

6SIMATIC VS 710

A5E00032597-02

Dimensions, Mounting Fixtures

The dimensions are dependent on the type of mounting (with or without a

mounting bracket attached).

13.5 16.5

16.5

131.5

143

1.5

120

screw threads

on 3 sides

depth: 8mm

148

21.5

22.5

12.5

80.6

American

coarse thread

1/4” 20 UNC

depth: 8mm

depth: 6mm

depth: 8mm

no mating connector

lens starts here

M4 8 mm deep

Figure 2 Dimensions with No Mounting Bracket Attached

Tabla de contenidos

Otros manuales de Hardware de computadora de Siemens

Siemens

Siemens SIMATIC NET CP 443-1 Advanced Manual de usuario

Siemens

Siemens PAD-5 Series Manual de usuario

Siemens

Siemens SIMEAS-Hub 7KE6000-8AD /CC Manual de usuario

Siemens

Siemens SIMATIC S7-1200 Manual de usuario

Siemens

Siemens Open Processor Manual de usuario

Siemens

Siemens SMP16-CPU06 Series Manual de usuario

Siemens

Siemens CP 343-5 Manual de usuario

Siemens

Siemens CP 5613 A3 Manual de usuario

Siemens

Siemens CP 5623 Manual de usuario

Siemens

Siemens SIMATIC NET CP 443-5 Extended Manual de usuario

Siemens

Siemens LMV50 series Manual de usuario

Siemens

Siemens SIMATIC NET CP 1411 Manual de usuario

Siemens

Siemens System 600 APOGEE Manual de usuario

Siemens

Siemens CP 5613 A3 Manual de usuario

Siemens

Siemens EB1 Manual de usuario

Siemens

Siemens SPEEDSTREAM SS1021 Manual de usuario

Siemens

Siemens TC65 Manual de usuario

Siemens

Siemens Simatic S7-1500 Manual de usuario

Siemens

Siemens CC-5 Manual de usuario

Siemens

Siemens SIMATIC NET CP 5512 Manual de usuario

Siemens

Siemens SIMATIC NET CP 5603 Manual de usuario

Siemens

Siemens SIMATIC S7 400 Guía del usuario

Siemens

Siemens SINUMERIK 808D Manual de usuario

Siemens

Siemens SIMATIC NET CP 5614 A2 Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario