Shuttle FS56 Manual de usuario
FS56
Pentium4/Celeron,478-pinProcessor
with 400/533/800 MHz FSB
Based DDR MAINBOARD
User's Manual
Shuttle®FS56
Pentium 4/Celeron, 478-pin Processor
with 400/533/800 MHz FSB
Based DDR Mainboard
Manual Version 1.0
Copyright
Copyright©2004 by Shuttle®Inc. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval system,
translated into any language, or transmitted in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without
prior written permission from Shuttle®Inc.
Disclaimer
Shuttle®Inc. shall not be liable for any incidental or consequential damages resulting from the
performance or use of this product.
This company makes no representations or warranties regarding the contents of this manual.
Information in this manual has been carefully checked for reliability; however, no guarantee is
given as to the correctness of the contents. In the interest of continued product improvement,
this company reserves the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to notify any
person of such revision or changes. The information contained in this manual is provided for
general use by the customers.
Trademarks
Shuttle is a registered trademark of Shuttle Inc.
Intel, Pentium is a registered trademarks of Intel Corporation.
SiS is a registered trademark of SiS Corporation.
PS/2 is a registered trademark of IBM Corporation.
AWARD is a registered trademark of Award Software Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
General Notice: Other brand and product names used herein are for identification
purposes only and may be trademarks of their respective owners.
M914
Statement of Shuttle Mainboard via the EMI Test
Shuttle mainboards have been via the EMI test in terms of series of regulations: EN55022/
CISPR22/AS/NZS3548 Class B, EN55024 (1998/AS/NZS), EN4252.1 (1994), EN61000,ANSI
C63.4 (1992), CFR47 Part 15 Subpart B, and CNS13438 (1997). The items tested are illus-
trated as follows:
(A)Voltage:AC110V/60HZ &AC230V/50HZ
(B) Tested Product Information:
Product Name: PC Mainboard
Status: Sample
ModelName: FS56
S/N:N/A
CPU:
External Frequency: 100 MHz
IntelPentium4: 1.6/ 1.8/2.0/2.2/2.4 GHz
External Frequency: 133 MHz
Intel Pentium4: 2.26/ 2.40/ 2.53/ 2.66/ 2.80/ 3.06 GHz
External Frequency: 200 MHz
Intel Pentium4: 2.8/ 3.0/ 3.2 GHz
Serial Port: two ports with 9 pins
VGA Port: one port with 15 pins
Keyboard Port: one port with 6 pins
Mouse Port: one port with 6 pins
USB 2.0 Port: four ports with 4 pins respectively
1394 Port: two port with 6 pins respectively
LAN Port: one port with 8 pins (10Mbps/100Mbps)
Center/Bass-Out & Line-Out & Line-In Ports: one port for each
Mic-In Ports: two ports
DIMM Memory (optional): DDR 400 256 MB *2
Power Cable: Detachable and Shielded (with a GND pin)
Maximum Resolution: 1280 X 1024 V:60Hz
All CPUs have completely been tested, and values offered by the worst EMI combination of
CPU external frequency are listed as follows:
Test Mode External Frequency CPU CPU Open/Close
1100MHz P4 2.40 GHz Close
2100MHz P4 2.40 GHz Open
3133MHz P4 3.06 GHz Close
4133MHz P4 3.06 GHz Open
5200MHz P4 3.20 GHz Close
6200MHz P4 3.20 GHz Open
(C) Remedy for the Tested Product & Its EMI Interference:
Remedy:N/A
EMIInterference:
Crystal:14.318MHz(X2)/ 24.576MHz(X6)/25.00MHz(X6)/ 32.768KHz(X1)
24.576MHz(X5)/12MHz(X4)/ 24.576MHz(X7)
Clock Generator: U4
(D) Supported Host Peripherals:
(E) Notices for Assembling Computers:
1. Cases should be made of iron or other metal that has good electric conductivity.
2. Cylinders in a case should be made of metal, and as having a mainboard mounted
in a case, make sure screws are all utilized and fastened on a mainboard.
3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.
4. Cables should appropriately be arranged and fixed in a case. Follow instructions:
Ø Leave IDE cables not crossed upon CPU and SDRAM;
Ø Leave power cables minimum in length, and not crossed upon a mainboard;
Ø Leave CPU fan cables minimum in length, and not near CPU;
Ø Leave cables on panels and other spare cables tied in a computer case.
5. Make sure an EMI shielding attached to a case has properly been installed.
6. Make sure a 5.25" or 3.5" FDD and screws are fastened to an EMI shielding.
7. Make sure a case is closely in contact with EMI connected points.
8. Make sure there is no cleft in a case which is not deformed.
9. Make sure a PCI orAGP door is bound to a case.
10. Make sure cables of other devices (fans or some others) are fixed in a case.
Host Peripheral Product Name Model Name S/N FCC ID
#1 Case FS56 N/A
#2 Power Supply (300W) AM630BS20S 0005596 D33047
#3 Maxtor HDD (40 GB) D740X-6L N/A 3902B975
#4 Panasonic FDD JU-257A606P
#5 Pioneer DVD Player DVD-116 AAMS027197WL 3892D029
- 1 -
TABLE OF CONTENTS
WHAT'S IN THE MANUAL.................................................................... 5
Quick Reference............................................................................................... 5
About This Manual ........................................................................................... 5
1 INTRODUCTION................................................................................ 6
1.1 TO DIFFERENT USERS ............................................................................. 6
FIRST-TIMEDIYSYSTEMBUILDER............................................................ 6
EXPERIENCEDDIY USER ........................................................................ 6
SYSTEMINTEGRATOR............................................................................... 6
1.2 ITEM CHECKLIST....................................................................................... 7
2 FEATURES ........................................................................................ 8
2.1 SPECIFICATIONS ....................................................................................... 8
3 HARDWARE INSTALLATION.......................................................... 11
3.1 STEP BY STEP INSTALLATION................................................................11
Accessories of FS56.............................................................................11
STEP1CPUInstallation ........................................................................ 12
STEP 2 Set Jumpers............................................................................. 13
STEP3InstallDDRSDRAMSystemMemory........................................ 13
STEP 4Install InternalPeripheralsin System Case ................................ 14
STEP5MounttheMainboardontheComputerChassis........................ 15
STEP6ConnectFrontPanelLEDs/Switches/USBs.............................. 16
STEP 7 Connect IDE and Floppy Disk Drives........................................ 17
STEP8Connect OtherInternalPeripherals............................................ 18
STEP9ConnectthePowerSupply........................................................ 19
STEP10InstallAdd-on Cards in ExpansionSlots .................................. 19
STEP11ConnectExternal Peripherals to Back-Panel........................... 20
STEP 12 First Time System Boot Up ..................................................... 21
STEP13InstallDrivers& Software Components ................................... 22
- 2 -
3.2 JUMPER SETTINGS ................................................................................. 23
JUMPERS&CONNECTORSGUIDE.................................................... 24
Jumpers
Clear CMOS Setting (JP1) ................................................................... 26
Back-Panel Connectors
VGAPortConnector .............................................................................. 27
COM1/2PortConnectors ...................................................................... 27
IEEE1394PortConnectors................................................................... 27
10/100base-TLANPortConnector....................................................... 27
USB0/1PortConnectors ...................................................................... 27
PS/2Keyboard&PS/2MouseConnectors............................................ 28
Line-Out(Front-Out)Port Connector....................................................... 28
Rear-OutPortConnector ....................................................................... 28
Bass/Center-OutPortConnector ........................................................... 28
Front-Panel Connectors
ATXPowerOn/Off SwitchConnector(PWON) ....................................... 29
HDD LED Connector (HLED) ................................................................ 29
Green LED / Power LED Connector (GLED/PLED)............................... 30
HardwareResetConnector (RST) ......................................................... 30
FrontPanelHeader(JP17).................................................................... 31
ExtendedUSBHeader(JP3)................................................................. 32
Internal Peripherals Connectors
EnhancedIDEandFloppy Connectors................................................... 32
Other Connectors
ATXPowerSupplyConnectors(CN5/JP7)........................................... 33
CPUandSystemFan Connectors (FAN1/2/3) ....................................... 34
AudioAUXILIARY_INConnector(CN3)(Black) ...................................... 34
AudioCD_INConnector(CN10)............................................................ 35
- 3 -
SPDIFOutConnector (JP18)................................................................. 35
WirelessKeyboardandMouse Connectors (JP2).................................. 36
IRHeader(JP13)................................................................................... 36
Ext.PrintPort(JP11) ............................................................................. 37
3.3 SYSTEM MEMORY CONFIGURATION ..................................................... 38
INSTALLMEMORY................................................................................ 38
UPGRADEMEMORY............................................................................ 38
4 SOFTWARE UTILITY ......................................................................39
4.1 Mainboard CD Overview ......................................................................... 39
4.2 Install Mainboard Software ..................................................................... 39
4.2.A Install SIS AGP Driver ............................................................................ 40
4.2.B Install SIS IDE Driver............................................................................. 40
4.2.C Install SIS VGA Driver ........................................................................... 41
4.2.D Install SIS USB2.0 Driver ...................................................................... 41
4.2.E Install Realtek LAN Driver..................................................................... 42
InstallWIN98 LANdriver ........................................................................ 42
4.2.F Install Realtek Audio Driver................................................................... 45
4.3 View the User's Manual........................................................................... 45
5 BIOS SETUP ................................................................................... 46
5.1 ENTER BIOS ............................................................................................. 46
5.2 THE MAIN MENU ...................................................................................... 47
STANDARD CMOS FEATURES ............................................................... 49
ADVANCED BIOS FEATURES................................................................. 52
ADVANCED CHIPSET FEATURES .......................................................... 56
INTEGRATEDPERIPHERALS .................................................................. 59
POWERMANAGEMENTSETUP.............................................................. 62
- 4 -
PNP/PCICONFIGURATIONS .................................................................... 66
PCHEALTHSTATUS................................................................................ 68
FREQUENCY/VOLTAGECONTROL ........................................................ 70
LOAD FAIL-SAFE DEFAULTS .................................................................. 71
LOADOPTIMIZEDDEFAULTS ................................................................. 71
SET PASSWORD ..................................................................................... 72
SAVE & EXIT SETUP................................................................................ 73
EXITWITHOUTSAVING ............................................................................ 73
- 5 -
WHAT'S IN THE MANUAL
Quick Reference
Hardware Installation >> Step-by-Step ................................................ Page 11
Jumper Settings >> A Closer Look.......................................................Page 23
Drivers/Software Utilities >> How to Install .........................................Page 39
BIOS Setup >> How to Configure.........................................................Page 46
About This Manual
For First-Time DIY System Builder.........................................................Page 6
For Experienced DIY User ......................................................................Page 6
For System Integrator .............................................................................Page 6
- 6 -
1INTRODUCTION
1.1 To Different Users
First-Time DIY System Builder
Welcome to the DIY world! Building your own computer system is not as diffi-
cult as you may think. To make your first computer DIY experience successful,
right from the start, we have designed the 3.1 Hardware Installation section
in a step-by-step fashion for all the first-time DIY system builders. Prior to instal-
lation, we also suggest you to read the whole manual carefully to gain a com-
plete understanding of your new Shuttle FS56 mainboard.
Experienced DIY User
Congratulate on your purchase of the Shuttle FS56 mainboard. You will find
that installing your new Shuttle FS56 mainboard is just easy. Bundled with an
array of onboard functions, the highly-integrated FS56 mainboard provides you
with a total solution to build the most stable and reliable system. Refer to sec-
tions 3.2 Jumper Settings and Chapter 4 Drivers/Software Utilities to
find out how to get the best out of your new mainboard. Chapter 5 BIOS
Setup also contains the relevant information on how to tune up your system to
achieve higher performance.
System Integrator
You have wisely chosen Shuttle FS56 to construct your system. Shuttle FS56
incorporates all the state-of-the-art technology of the SiS 661FX chipset from
SiS. It integrates the most advanced functions you can find to date in a com-
pact Small Form Factor ATX board.
Otros manuales para FS56
1
Tabla de contenidos
Otros manuales de Placa madre de Shuttle
Shuttle
Shuttle MS21 Manual de usuario
Shuttle
Shuttle MB11 Manual de usuario
Shuttle
Shuttle FB62 Manual de usuario
Shuttle
Shuttle AB45 Manual de usuario
Shuttle
Shuttle MK32N Manual de usuario
Shuttle
Shuttle HOT-591 Manual de usuario
Shuttle
Shuttle HOT-597 Manual de usuario
Shuttle
Shuttle HOT-675 Manual de usuario
Shuttle
Shuttle FB75 Manual de usuario
Shuttle
Shuttle Spacewalker MV11 Manual de usuario
Shuttle
Shuttle HOT-649A Manual de usuario
Shuttle
Shuttle Spacewalker AV32 Manual de usuario
Shuttle
Shuttle FS51 Manual de usuario
Shuttle
Shuttle FN45 Manual de usuario
Shuttle
Shuttle FB86 Manual de usuario
Shuttle
Shuttle MV43P Manual de usuario
Shuttle
Shuttle HOT-559 Manual de usuario
Shuttle
Shuttle FS56 Manual de usuario
Shuttle
Shuttle AV14 Manual de usuario
Shuttle
Shuttle FN25 Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
