Shuttle FN25 Manual de usuario

FN25

Socket939

AMDTM Athlon64Processor

BasedDDRMainBoard

User's Manual

Shuttle®FN25

Socket 939

AMD AthlonTM 64 Processor

Based DDR Mainboard

No part of this publication may be reproduced, transcribed, stored in a retrieval system,

translated into any language, or transmitted in any form or by any means, electronic,

mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without

prior written permission from Shuttle®Inc.

Disclaimer

Shuttle®Inc. shall not be liable for any incidental or consequential damages resulting from the

performance or use of this product.

This company makes no representations or warranties regarding the contents of this manual.

Information in this manual has been carefully checked for reliability; however, no guarantee is

given as to the correctness of the contents. In the interest of continued product improvement,

this company reserves the right to revise the manual or include changes in the specifications

of the product described within it at any time without notice and without obligation to notify any

person of such revision or changes. The information contained in this manual is provided for

general use by the customers.

Trademarks

Shuttle is a registered trademark of Shuttle Inc.

AMDAthlonTM64 is registered trademarks ofAMDCorporation.

nVIDIAis a registered trademark of nVIDIA Corporation.

PS/2 is a registered trademark of IBM Corporation.

AWARD is a registered trademark of Award Software Inc.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

General Notice: Other brand and product names used herein are for identification purposes

only and may be trademarks of their respective owners.

Statement of Shuttle Mainboard via the EMI Test

Shuttle mainboards have been via the EMI test in terms of series of regulations: EN55022/

CISPR22/AS/NZS3548 Class B, EN55024 (1998/AS/NZS), EN4252.1 (1994), EN61000,ANSI

C63.4 (1992), CFR47 Part 15 Subpart B, and CNS13438 (1997). The items tested are illus-

trated as follows:

(A)Voltage:AC110V/60HZ &AC230V/50HZ

(B) Tested Product Information:

Product Name: PC Mainboard

Status: Sample

ModelName:FN25

S/N:N/A

CPU:

External Frequency: 200 MHz

AMD AthlonTM 64 : 2800+, 3200+, 3400+, 3800+, 4000+

Serial Port: one port with 9 pins

Clear CMOS button: one port

Keyboard Port: one port with 6 pins

Mouse Port: one port with 6 pins

USB 2.0 Port: six ports with 4 pins respectively

1394 Port: two port with 6 pins respectively

LAN Port: one port with 8 pins (10Mbps/100Mbps/1000Mbps)

Mic-In & Line-In & Earphone Ports: one port for each

Center/Bass-Out Port: one port

Surround-Out Port: one port

Surround-Back Port: one port

Front-Out Port: one port

SPDIF-Out (Coaxial) Port: one port

SPDIF-Out (Optical) Port: one port

SPDIF-In (Optical) Port: one port

DIMM Memory (optional): DDR400 256 MB *2

Power Cable: Detachable and Shielded (with a GND pin)

Monitor:CRT

Maximum Resolution: 1280 X 1024 V:60Hz

All CPUs have completely been tested, and values offered by the worst EMI combination of

CPU external frequency are listed as follows:

Test Mode External Frequency CPU CPU Open/Close

1200MHz AMD AthlonTM 64 4000+ Close

2200MHz AMD AthlonTM 64 4000+ Open

Remedy:N/A

EMIInterference:

Crystal: 32.768KHz(X8)/25 MHz(X7)/22.5MHz(X9)/ 24.576MHz(X10)/24.576 MHz(X6)

(D) Supported Host Peripherals:

Host Peripheral Product Name Model Name

# 1 Case FN25

# 2 Power Supply PC43I3503

# 3 Serial ATA Seagate ST3120026AS

# 4 Shuttle Card Reader A010

# 5 SONY DVD Player CDK1016

(E) Notices for Assembling Computers:

1. Cases should be made of iron or other metal that has good electric conductivity.

2. Cylinders in a case should be made of metal, and as having a mainboard mounted

in a case, make sure screws are all utilized and fastened on a mainboard.

3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.

4. Cables should appropriately be arranged and fixed in a case. Follow instructions:

Ø Leave IDE cables not crossed upon CPU and SDRAM;

Ø Leave power cables minimum in length, and not crossed upon a mainboard;

Ø Leave CPU fan cables minimum in length, and not near CPU;

Ø Leave cables on panels and other spare cables tied in a computer case.

5. Make sure an EMI shielding attached to a case has properly been installed.

6. Make sure a 5.25" or 3.5" FDD and screws are fastened to an EMI shielding.

7. Make sure a case is closely in contact with EMI connected points.

8. Make sure there is no cleft in a case which is not deformed.

9. Make sure a PCI orAGP door is bound to a case.

10. Make sure cables of other devices (fans or some others) are fixed in a case.

Important Safety Information

SAFETY INSTRUCTIONS

1. Pleasereadthese safetyinstructionscarefully.

2. Pleasekeep thisUser‘sManualfor laterreference.

3. Pleasedisconnect thisequipmentfromACoutlet beforecleaning. Don‘tuseliquid

orsprayed detergentforcleaning.

4. Forpluggable equipment,the socket-outletshallbe installednear theequipment

andshall beeasily accessible.

5. Pleasekeepthis equipmentfromhumidity.

6. Laythisequipment onareliablesurface wheninstall.Adrop orfallcould causeinjury.

7. Donot leavethisequipmentin anenvironmentunconditioned, itmaydamage the

equipment.

8. Theopenings ontheenclosureare forairconvection henceProtectthe equipment

fromoverheating.DO NOTCOVERTHEOPENINGS.

9. Makesure thevoltage ofthepower sourcewhenconnectthe equipmenttothe

poweroutlet.

10. Placethepower cordsuchaway thatpeoplecannot steponit.Do notplace anything

overthepower cord.The powercord mustbe ratedfor theproductandforthe voltage

andcurrent markedon theproduct’s electricalratings label.Thevoltage andcurrent

ratingof thecordshouldbe greaterthanthe voltageandcurrent ratingmarkedonthe

product.

11. Allcautions andwarningsonthe equipmentshouldbe noted.

12. Iftheequipmentisnotuseforlongtime,disconnectthe equipment frommainstoavoid

beingdamagedby transientover-voltage.

13. Neverpouranyliquidintoventilation openings,thiscouldcause fireorelectricalshock.

14. CAUTION:The computerisprovidedwith abattery-poweredreal-time clockcircuit.

Thereis adangerof explosionifbattery isincorrectlyreplaced.

Replaceonlywith sameorequivalenttype recommendedby themanufacture.

Discardused batteriesaccordingto themanufacturer’sinstructions.

15. THE COMPUTER IS PROVIDED WITH CD DRIVES COMPLY WITHAPPROPRI-

ATESAFETY STANDARDSINCLUDINGIEC 60825.

CAUTION :RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN

INCORRECT TYPE. DISPOSE OF USED BATTERIES

ACCORDING TO THE INSTRUCTIONS

CLASS 1 LASER PRODUCT

- 1 -

WHAT'S IN THE MANUAL.................................................................... 5

Quick Reference ............................................................................................... 5

About This Manual ........................................................................................... 5

1 INTRODUCTION................................................................................ 6

1.1 TO DIFFERENT USERS ............................................................................. 6

FIRST-TIMEDIYSYSTEMBUILDER............................................................ 6

EXPERIENCEDDIY USER ........................................................................ 6

SYSTEMINTEGRATOR............................................................................... 6

1.2 ITEM CHECKLIST....................................................................................... 7

2 FEATURES ........................................................................................ 8

2.1 SPECIFICATIONS ....................................................................................... 8

3 HARDWARE INSTALLATION.......................................................... 11

3.1 STEP BY STEP INSTALLATION................................................................11

Accessories of FN25.............................................................................11

STEP1 Installthe CPU.......................................................................... 12

STEP 2 Set Jumper............................................................................... 13

STEP3 InstallDDRSDRAM SystemMemory........................................ 13

STEP4 InstallPeripheralsin SystemCase............................................ 14

STEP5 Mountthe Mainboardonthe ComputerChassis........................ 15

STEP6 ConnectFront PanelHeader (JP12)&Front PanelAUDIO/USB/

1394 Connector(JP6/JP16) ................................................................. 16

STEP7 ConnectIDE, Floppyand SerialATADrives .............................. 17

STEP8Connect OtherInternalPeripherals............................................ 18

STEP9 InstallAdd-on CardsinExpansion Slots .................................... 20

STEP10 ConnectthePower SupplyConnectors................................... 20

STEP11 Connect ExternalPeripherals toBack Panel ........................... 21

STEP 12 First Time System Boot Up ..................................................... 22

TABLE OF CONTENTS

- 2 -

STEP13 InstallDrivers& SoftwareComponents ................................... 23

3.2 JUMPER SETTINGS ................................................................................. 24

JUMPERS& CONNECTORSGUIDE.................................................... 25

Jumper

Clear CMOS Setting (JP17) ................................................................. 27

COM Port .............................................................................................. 28

ClearCMOS Button............................................................................... 28

PS/2 Keyboard & PS/2 Mouse Ports ..................................................... 28

Giga LAN Port....................................................................................... 28

1394 Port .............................................................................................. 29

USB Ports ............................................................................................. 29

SPDIF-OUTCoaxial Port....................................................................... 29

SPDIF-OUTOpticalPort........................................................................ 29

SPDIF-INOpticalPort............................................................................ 29

7.1ChannelSurround-Out port............................................................... 30

7.1Channel Bass/Centerport................................................................ 30

7.1ChannelFront-Outport..................................................................... 30

7.1ChannelSurround-Back port ............................................................ 30

Line-Inport ............................................................................................ 30

Front-Panel Connectors

PowerOn/OffSwitch Connector(PWON)............................................... 31

HDD LED Connector (HLED) ................................................................ 31

PowerLED Connector(PWR_LED) ...................................................... 32

HardwareResetConnector (RST) ......................................................... 32

FrontPanelAUDIO/USB/1394 Connector(JP6/JP16).......................... 33

Internal Peripherals Connectors

EnhancedIDE,Floppy Connectors ........................................................ 34

SerialATA Connectors........................................................................... 34

- 3 -

Other Connectors

PowerConnectors (8-pinATX3,6-pinCN5)........................................... 35

FanConnectors(FAN1/2/3/4) ................................................................ 36

WirelessKeyboard andMouseConnector (JP2).................................... 36

LINE-INConnector(CN8)(Blue)............................................................. 37

CD-IN Connector(CN7) (Black) ............................................................. 37

MiniCD-IN Connector(CN6)(White) ..................................................... 37

USB Header (USB3) ............................................................................. 38

ParallelPort Header-EXT.Print Port(J1) ............................................... 38

IrDAHeader (JP5) ................................................................................. 39

AudioSetting (JP21) ............................................................................. 39

3.3 SYSTEM MEMORY CONFIGURATION ..................................................... 40

INSTALLMEMORY................................................................................ 40

UPGRADEMEMORY............................................................................ 40

4 SOFTWARE UTILITY ......................................................................41

4.1 Mainboard CD Overview ......................................................................... 41

4.2 Install Mainboard Software ...................................................................... 42

4.2.A Install DirectX9 Utility ............................................................................ 43

4.2.B Install nVIDIA Chipset Driver ................................................................ 43

4.2.C Install VIAAudio Driver ......................................................................... 44

4.2.D Install nVIDIA USB 2.0 Driver................................................................ 44

4.3 View the User's Manual............................................................................ 45

5 BIOS SETUP ................................................................................... 46

5.1 ENTER BIOS ............................................................................................. 46

5.2 THE MAIN MENU ...................................................................................... 47

STANDARD CMOS FEATURES ............................................................... 49

ADVANCED BIOS FEATURES................................................................. 52

ADVANCED CHIPSET FEATURES .......................................................... 56

- 4 -

INTEGRATEDPERIPHERALS .................................................................. 59

POWERMANAGEMENT SETUP.............................................................. 62

PNP/PCICONFIGURATION....................................................................... 65

PCHEALTH STATUS................................................................................ 67

RATIO/VOLTAGECONTROL..................................................................... 69

LOAD FAIL-SAFE DEFAULTS .................................................................. 70

LOADOPTIMIZEDDEFAULTS ................................................................. 70

SETSUPERVISOR/USER PASSWORD................................................... 70

SAVE & EXIT SETUP................................................................................ 71

EXITWITHOUTSAVING ............................................................................ 71

- 5 -

Quick Reference

Hardware Installation >> Step-by-Step ................................................ Page 11

Jumper Settings >> A Closer Look.......................................................Page 24

Drivers/Software Utilities >> How to Install .........................................Page 41

BIOS Setup >> How to Configure.........................................................Page 46

About This Manual

For First-Time DIY System Builder.........................................................Page 6

For Experienced DIY User ......................................................................Page 6

For System Integrator .............................................................................Page 6

WHAT'S IN THE MANUAL

Tabla de contenidos

Otros manuales de Placa madre de Shuttle

Shuttle

Shuttle FB83 Manual de usuario

Shuttle

Shuttle MS52P Manual de usuario

Shuttle

Shuttle AN35 Ultra Manual de usuario

Shuttle

Shuttle FB61 Manual de usuario

Shuttle

Shuttle Spacewalke AK21 Manual de usuario

Shuttle

Shuttle FV24 Manual de usuario

Shuttle

Shuttle Spacewalker AB30 Manual de usuario

Shuttle

Shuttle HOT-591 Manual de usuario

Shuttle

Shuttle FV24 Manual de usuario

Shuttle

Shuttle FB77 Manual de usuario

Shuttle

Shuttle HOT-623 Manual de usuario

Shuttle

Shuttle AK37GT Manual de usuario

Shuttle

Shuttle AB61 Manual de usuario

Shuttle

Shuttle AE23 Manual de usuario

Shuttle

Shuttle HOT-641/P Manual de usuario

Shuttle

Shuttle AV14 Manual de usuario

Shuttle

Shuttle FX83 Manual de usuario

Shuttle

Shuttle MN31 Manual de usuario

Shuttle

Shuttle Spacewalker AV40 Manual de usuario

Shuttle

Shuttle HOT-591P Manual de usuario

Shuttle

Shuttle FX43G Manual de usuario

Shuttle

Shuttle HOT-675 Manual de usuario

Shuttle

Shuttle FB65 Manual de usuario

Shuttle

Shuttle Spacewalker HOT-687 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario