Shuttle AV14 Manual de usuario
AV14
PPGA Celeron processor
Based AGP MAIN BOARD
User's Manual
M352
Shuttle AV14
PPGA Celeron processor based AGPset Mainboard
Manual Version 1.1
Copyright
Copyright©2000 by Shuttle Inc. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval system,
translated into any language, or transmitted in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without
prior written permission from Shuttle Inc.
Disclaimer
Shuttle Inc. shall not be liable for any incidental or consequential damages resulting from the
performance or use of this product.
This company makes no representations or warranties regarding the contents of this manual.
Information in this manual has been carefully checked for reliability; however, no guarantee is
given as to the correctness of the contents. In the interest of continued product improvement,
this company reserves the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to notify any
persion of such revision or changes. The information contained in this manual is provided for
general use by the customers.
Trademarks
Spacewalker is a registered trademark of Shuttle Inc.
Intel, Pentium is a registered trademarks of Intel Corporation.
VIA is a registered trademarks of VIA Corporation.
PC/AT is a registered trademark of International Business Machines (IBM) Corporation.
PS/2 is a registered trademark of IBM Corporation.
AWARD is a registered trademark of Award Software Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
General Notice: Other brand and product names used herein are for identification
purposes only and may be trademarks of their respective owners.
- 1 -
WHAT’S IN THE MANUAL ........................................................................4
Quick Reference .......................................................................................................... 4
About This Manual ...................................................................................................... 4
Technical Support ....................................................................................................... 4
1 INTRODUCTION......................................................................................5
1.1 TO DIFFERENT USERS ....................................................................................... 5
FIRST-TIME DIY SYSTEM BUILDER............................................................ 5
EXPERIENCED DIY USER ............................................................................. 5
SYSTEM INTEGRATOR .................................................................................. 5
1.2 ITEM CHECKLIST.................................................................................................. 6
2 FEATURES ..............................................................................................7
2.1 SPECIFICATIONS.................................................................................................. 7
3HARDWAREINSTALLATION............................................................. 10
3.1 STEP BY STEP INSTALLATION ......................................................................10
Accessories Of AV14 ......................................................................................10
STEP 1 Install the CPU...................................................................................11
STEP 2 Set Jumpers.......................................................................................12
STEP 3 Install SDRAM System Memory.....................................................12
STEP 4 Install Internal Peripherals in System Case..................................13
STEP 5 Mount the Mainboard on the Computer Chassis.........................14
STEP 6 Connect Front Panel Switches/LEDs/Speaker ............................15
STEP 7 Connect IDE & Floppy Disk Drives ................................................17
STEP 8 Connect Other Internal Peripherals ...............................................17
STEP 9 Connect the Power Supply..............................................................18
STEP 10 Install Add-on Cards in Expansion Slots.....................................18
TABLE OF CONTENTS
- 2 -
STEP 11 Connect External Peripherals to Back Panel.............................19
STEP 12 First Time System Boot Up ...........................................................20
STEP 13 Install Drivers & Software Components ......................................21
3.2 JUMPER SETTINGS............................................................................................22
Jumpers & Connectors Guide........................................................................23
Set Keyboard & PS/2 Mouse Power-On (JP3) ...........................................25
Clear CMOS (JP12).........................................................................................26
CPU Clock Ratio Setting (JP9) ......................................................................27
Front Side Bus(FSB) Speed Auto Config. Setting (JP15 and JP14)......28
PS/2 Keyboard & PS/2 Mouse Connectors .................................................29
USB1 / USB2 Port Connectors......................................................................29
COM1 / COM2 Connector ..............................................................................29
Parallel Port Connector...................................................................................29
Hardware Reset Connector (RST) ................................................................30
HDD LED Connector (HDLED)......................................................................30
Green LED Connector (GLED)......................................................................30
EPMI Connector (EPMI) .................................................................................30
ATX Power On/Off Switch Connector (PON) ..............................................31
PWR LED Connector (PWLED) ....................................................................31
Speaker Connector (SPK)..............................................................................31
Enhanced IDE Ports and Floppy Connectors .............................................32
IR Connector (J4).............................................................................................33
Wake-on LAN Connector (J16)......................................................................33
SB-Link Connector (JP10)..............................................................................34
CPU , Cooling Fan Connectors (JP12), (JP2) & (JP1) ..............................34
ATX Power Supply Connector (J5) ...............................................................35
- 3 -
3.3 SYSTEM MEMORY CONFIGURATION........................................................... 36
Install Memory.................................................................................................. 36
Upgrade Memory............................................................................................. 36
4SOFTWAREUTILITY............................................................................36
4.1 AV14 MAINBOARD CD OVERVIEW............................................................... 37
4.2 INSTALL MAINBOARD DRIVER..................................................................... 38
4.3 TO VIEW THE USER'S MANUAL.................................................................... 39
5BIOSSETUP .........................................................................................40
5.1 ENTERING BIOS.................................................................................................. 40
5.2 THE MAIN MENU................................................................................................. 41
Standard CMOS Setup ................................................................................... 43
BIOS Features Setup ...................................................................................... 45
Chipset Features Setup .................................................................................. 49
Integrated Peripherals..................................................................................... 53
Power Management Setup............................................................................. 57
PnP / PCI Configuration.................................................................................. 59
PC Health Status ............................................................................................. 61
Frequency/Voltage Control ............................................................................ 63
Load Fail-Safe Defaults .................................................................................. 64
Load Optimized Defaults ................................................................................ 64
User Password Setting ................................................................................... 65
Save & Exit Setup ............................................................................................ 66
Exit Without Saving ......................................................................................... 66
- 4 -
Quick Reference
Hardware Installation >> Step-by-Step...................................................... Page 10
Jumper Settings >> A Closer Look ............................................................ Page 22
Software Utility >> How to Install ................................................................ Page 37
BIOS Setup >> How to Configure ............................................................... Page 40
About This Manual
For First-Time DIY System Builder ................................................................Page 5
For Experienced DIY User ...............................................................................Page 5
For System Integrator.......................................................................................Page 5
WHAT’S IN THE MANUAL
- 5 -
1 INTRODUCTION
1.1 To Different Users
First-Time DIY System Builder
Welcome to the DIY world! Building your own computer system is not as
difficult as you may think. To make your first computer DIY experience a
success, right from the start, we have designed the 3 Hardware Installation
section in a step-by-step fashion for all the first-time DIY system builders. Prior
to installation, we also suggest you to read the whole manual carefully to gain
a complete understanding of your new AV14 mainboard.
Experienced DIY User
Congratulations on your purchase of the Shuttle AV14 mainboard. You will
findthatinstalling yournewShuttle AV14mainboardisjustthateasy. Bundled
withanarrayofonboardfunctions,thehighly-integratedAV14mainboardpro-
vides you with a total solution to build the most stable and reliable system.
Refer to section3.2 Jumper Settings andChapter 4 Software Utility tofindout
how to get the best out of your new mainboard. Chapter 5 BIOS Setup also
containsrelevant informationon howto tuneup yoursystem toachieve higher
performance.
System Integrator
You have wisely chosen Shuttle AV14 to construct your system. Shuttle
AV14 incorporates all the state-of-the-art technology of the VT82C694X
chipset from VIA. It integrates the most advanced functions you can find to
date in a compact ATX board. Refer to section3.2 Jumper Settings and
Chapter 4 Software Utility for an in-depth view of system construction.
- 6 -
1.2 Item Checklist
Check all items you received with your AV14 mainboard to make sure
nothing is missing. The complete package should include:
-One Shuttle AV14 Mainboard
-One ATA/66 Ribbon Cable
-One Floppy Ribbon Cable
-This AV14 User’s Manual
-One CD-ROM containing:
ØThe AV14 user’s manual on PDF format
ØThe VIA 4 IN 1 Drivers
ØThe Award Flashing Utility
JP14
1
PGA370
AWARD
AllrightsreservedPCI/PNP586
S/N 1997
+
J4
1
JP121
JP10
1SB- LINK
J9
1
VT82C694X
9949CE TAIWAN
12CON9600C
VT82C596B 9952CETAIWAN 14DON3022
C
J16
1
AV 14
- 7 -
The AV14 mainboard is carefully designed for the demanding PC user who wants high
performance and maximum intelligent features in a compact package.
2.1 Specifications
-- CPU Support
Support Intel PPGA Celeron Processor 300 ~ 500+ MHz
Intel FC-PGA Coopermine Processor 500 ~ 933+ MHz
-- Chipset
Features VIA VT82C694X AGPset and VT82C596B Chipset.
-- Jumperless CPU Configuration
According to the FC-PGA/PPGA CPU user may adjust CPU voltage.
Soft-configure CPU Speed (The CPU operating speed is software
configurable in menu of the BIOS Setup utility.)
-- Versatile Memory Support
Equipped with three DIMM banks of PC66/100/133 compliant SDRAM to
provide up to 1.5GB of system memory.
Configurable support for EC (Error Checking) and ECC (Error Checking
and Correcting)
-- AGP Slot
Supports 2X/4X Accelerated Graphics Port cards for high-performance,
component level interconnect directed at 3D graphical display applica-
tions.
-- PCI and ISA Expansion Slots
Provides five 32-bit PCI slots which meet PCI spec. and two optional 16-bit
ISA slots.
-- Super I/O Onboard
Provides a variety of I/O interfaces:
Ø1 × Floppy interface for 3.5-inch FDD with 720KB, 1.44MB, 2.88MB
2 FEATURES
- 8 -
format or for 5.25-inch FDD with 360KB or 1.2MB format.
Ø1 × PS/2 mouse connector
Ø1 × PS/2 Keyboard connector
Ø2 × USB connectors
Ø2 × DB9 Serial connectors 16550 UART compatible
Ø1 × Infrared communications port ASKIR and HPSIR compatible.
(Serial port COM2 can also be redirected to an external IrDA Adapter
for wireless connection.)
Ø1 × DB25 Parallel port supporting Standard Parallel Port (SPP),
Enhanced Parallel Port (EPP), and Extended Capabilities Port (ECP)
data transmission schemes.
-- PCI Bus Master IDE Controller Onboard
Two UltraDMA 33/66 Bus Master Dual-channel IDE ports provide support to a
maximum of four IDE devices (one Master and one Slave per channel). The
IDE Bus implements data transfer speeds of up to 33/66 MB/sec and also sup-
ports Enhanced PIO Modes 0 ~ 4.
-- ATX Power Supply Connector
ATX power supply unit can connect to the onboard 20-pin ATX power
connector, supporting Suspend and Soft-On/Off by dual-function power
button.
-- Advanced Configuration and Power Interface
Features four power savings modes: Snoop, Suspend to RAM, Suspend to
Disk, and Soft-Off. ACPI provides more efficient Energy Savings Features
controlled by your operating system that supports OS Direct Power Manage-
ment (OSPM) functionality.
-- System BIOS
Provides licensed Award V6.0PG BIOS on 2MB Flash EEPROM.
Supports Green PC and Desktop Management Interface (DMI).
-- ATX Form Factor
Tabla de contenidos
Otros manuales de Placa madre de Shuttle
Shuttle
Shuttle HOT-591P Manual de usuario
Shuttle
Shuttle Spacewalker AK31 Manual de usuario
Shuttle
Shuttle FB65 Manual de usuario
Shuttle
Shuttle HOT-433 Manual de usuario
Shuttle
Shuttle FB54 Manual de usuario
Shuttle
Shuttle FT61 Manual de usuario
Shuttle
Shuttle Spacewalker ME17 Manual de usuario
Shuttle
Shuttle HOT-559 Manual de usuario
Shuttle
Shuttle AV49V Manual de usuario
Shuttle
Shuttle FB51 Manual de usuario
Shuttle
Shuttle FV25 Manual de usuario
Shuttle
Shuttle FB86 Manual de usuario
Shuttle
Shuttle Spacewalker MK20 Manual de usuario
Shuttle
Shuttle MB48 Manual de usuario
Shuttle
Shuttle Spacewalker MV11 Manual de usuario
Shuttle
Shuttle AB60P Manual de usuario
Shuttle
Shuttle Spacewalker AV41 Manual de usuario
Shuttle
Shuttle AE23 Manual de usuario
Shuttle
Shuttle Spacewalker AV32 Manual de usuario
Shuttle
Shuttle FB62 Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
