1413
FRONT PANEL FUNCTION BACK PANEL FUNCTION
3INPUT
This knob is for input selection of digital or analog audio signals.
1REMOTE CONTROL RECEIVER
Receive the infrared remote control command signal sent by the
remote control.
2POWER
This button is used to turn on or off the AC power supply of the
whole machine.
4INPUT INDICATOR
This indicator is used for input indication of different audio signals;
The selected (LINE,XLR,BT,USB,OPTICAL,COAXIAL) digital or analog
audio signal indicator lights up accordingly.
8VOLUME
This knob is used as a volume control; when it is turned to the
right, the volume increases, and when it is turned to the left, the
volume decreases.
（The red indicator light is for delay indication）
9LOUD
When listening at a low volume, press this button to compensate
for the loudness of high and low sounds, and the corresponding
indicator light is green; but when the volume is turned to more
than half, the effect gradually decreases. During the reset, the
corresponding indicator is orange.
5DF
When the button is pressed, the damping coefficient is high (35), and
the corresponding indicator is green. During reset, the damping
coefficient is low (18), and the corresponding indicator light is orange.
6INDICATOR WINDOW
When the color of the panel is red, it is in the working state of partial
Class A, and when it is green, it is in the working state of Class AB.
7BIAS
This switch is to set the working mode of the machine;
When the switch is pressed, the machine runs in partial class A mode
(the window shows red). When there is a signal, the pointer deflection
degree is the center point;
When resetting, the machine runs in Class AB mode (the window
shows green), and the pointer deflection degree is the starting point
of one grid.
32 57896
4
1
BLUETOOTH RECEIVER
Used for digital devices and "Bluetooth" transceiver interconnect signals.
Operation example:
1.After the power of the audio combination is turned on, the Bluetooth
enters the waiting state for pairing.
2.Enter the phone settings, turn on the phone’s Bluetooth function, scan
to find the device; the phone will find the word "ShengYa", operate the
phone to connect with it (you don’t need to enter a password to connect).
3.After connecting, turn on the mobile music player, press the play button,
and the sound will be broadcast on the speaker on the audio combiner.
Notice:
1.If the Bluetooth of the mobile phone has not been turned off, and the
Bluetooth of the speaker is in a state of pairing, when the speaker
combination is turned off, the next time it is turned on, the Bluetooth will
enter the reconnecting state; after 10 seconds, it will enter the waiting for
pairing state.
2.After the Bluetooth of the audio combination device and the mobile
phone is out of the receiving distance or disconnected, if it returns to the
normal distance within 60 seconds, the Bluetooth can automatically
connect back to the connection, otherwise the Bluetooth of the audio
combination enters the waiting state for pairing.
3.After the speaker combination is connected with Bluetooth, it is
necessary to turn off the Bluetooth function of the current phone before
connecting with the Bluetooth of another mobile phone, and then operate
the Bluetooth search of another mobile phone to connect.
4.The speaker combination Bluetooth can be connected with bluetooth
products of digital products such as laptops, mobile phones, IPDA and
other digital products.
1
8POWER SOCKET WITH AC POWER FUSE
This power socket is used to connect to AC power. The fuse is at
the bottom of the power socket. When replacing the fuse,be sure
to pull out the power cord to replace it.
7RIGHT/LEFT CHANNEL OUTPUT TERMINAL
It can be connected to speakers with an impedance of 4-8Ω; the
red is the positive pole and the black is the negative pole.
5OPTICAL DIGITAL INPUT TERMINAL
This terminal is used as an optical interface for connecting digital
equipment.(Computer/digital game console/CD/DVD player/HD TV set-top box)
2LINE AUDIO INPUT TERMINAL
This terminal is used to connect the output terminal of the audio
source.(Such as audio equipment, computers, mobile phones, MP3, etc.)
4COAXIAL DIGITAL INPUT TERMINAL
This terminal is used as an optical interface for connecting digital
equipment.(Computer/digital game console/CD/DVD player/HD TV set-top box)
6USB DIGITAL INPUT TERMINAL
This terminal is used as a USB interface for connecting digital
devices. (Computer/Digital player, etc.)
Note: Apple system and the digital player is free of driver installation, and the window
system needs to go to the download center of Shengya official website to download the
driver and install it.(http://www.shengya-audio.com/downloads.html)
3XLR INPUT TERMINAL
This terminal is used to connect equipment with XLR output.
1
23 4 7
568
