1413
FRONT PANEL FUNCTION BACK PANEL FUNCTION
REMOTE CONTROL RECEIVER
Receive the infrared remote control command signal sent by the
remote control.
7
POWER
This button is used to turn on or off the AC power supply of the
whole machine.
6
INPUT
This knob is for input selection of six different audio signals.
1
2VOLUME
This knob is used as a volume control; when it is turned to the
right, the volume increases, and when it is turned to the left, the
volume decreases.
（The red indicator light is for delay or internal protection status indication）
LOUD
When listening at a low volume, press this button to compensate
for the loudness of high and low sounds, but when the volume is
turned to more than half, the effect gradually decreases.
3
TONE
When this switch is pressed, the audio signal is controlled by the tone,
which can be adjusted for high and low sounds. When reset, it is not
controlled by the tone,and the original sound quality is at this time.
4
BASS
This knob is used to control the size of the bass tone; it increases
when it is turned to the right, and decreases when it is turned to
the left.
9
TREBLE
This knob is used to control the size of the treble tone; it increases
when it is turned to the right, and decreases when it is turned to
the left.
10
BLUETOOTH RECEIVER
Used for wireless signal connection between digital devices.
Operation example:
1.After the power of the audio combination is turned on, the Bluetooth
enters the waiting state for pairing.
2.Enter the phone settings, turn on the phone’s Bluetooth function, scan
to find the device; the phone will find the word "ShengYa", operate the
phone to connect with it (you don’t need to enter a password to connect).
3.After connecting, turn on the mobile music player, press the play button,
and the sound will be broadcast on the speaker on the audio combiner.
Notice:
1.If the Bluetooth of the mobile phone has not been turned off, and the
Bluetooth of the speaker is in a state of pairing, when the speaker
combination is turned off, the next time it is turned on, the Bluetooth will
enter the reconnecting state; after 10 seconds, it will enter the waiting for
pairing state.
2.After the Bluetooth of the audio combination device and the mobile
phone is out of the receiving distance or disconnected, if it returns to the
normal distance within 60 seconds, the Bluetooth can automatically
connect back to the connection, otherwise the Bluetooth of the audio
combination enters the waiting state for pairing.
3.After the speaker combination is connected with Bluetooth, it is
necessary to turn off the Bluetooth function of the current phone before
connecting with the Bluetooth of another mobile phone, and then operate
the Bluetooth search of another mobile phone to connect.
4.The speaker combination Bluetooth can be connected with bluetooth
products of digital products such as laptops, mobile phones, IPDA and
other digital products.
1
1
6
2
4 9 103 7
58
5INPUT INDICATOR
This indicator is used for input indication of different audio signals;
The selected (line, XLR, BT) digital or analog audio signal indicator
lights up accordingly.
8INPUT INDICATOR
This indicator is used for input indication of different audio signals;
The selected (line, XLR, BT) digital or analog audio signal indicator
lights up accordingly.
31
567
2
48
POWER SOCKET WITH AC POWER FUSE
This power socket is used to connect to AC power. The fuse is at
the bottom of the power socket. When replacing the fuse,be sure
to pull out the power cord to replace it.
5
RIGHT/LEFT CHANNEL OUTPUT TERMINAL
It can be connected to speakers with an impedance of 4-8Ω; the
red is the positive pole and the white is the negative pole.
2
OPTICAL DIGITAL INPUT TERMINAL
This terminal is used as an optical interface for connecting digital
equipment.(Computer/digital game console/CD/DVD player/HD TV set-top box)
7
LINE AUDIO INPUT TERMINAL
This terminal is used to connect the output terminal of the audio
source.(Such as audio equipment, computers, mobile phones, MP3, etc.)
3
COAXIAL DIGITAL INPUT TERMINAL
This terminal is used as an optical interface for connecting digital
equipment.(Computer/digital game console/CD/DVD player/HD TV set-top box)
6
8USB DIGITAL INPUT TERMINAL
This terminal is used as a USB interface for connecting digital
devices. (Computer/Digital player, etc.)
Note: Apple system and the digital player is free of driver installation, and the window
system needs to go to the download center of Shengya official website to download the
driver and install it.(http://www.shengya-audio.com/downloads.html)
4XLR INPUT TERMINAL
This terminal is used to connect equipment with XLR output.
