SGM P-2 WASH LIGHT Manual de usuario
P‐2WASHLIGHT
P2 Manual_170x113,3.book Page 1 Wednesday, January 7, 2015 11:47 AM
2
Dimensions
Measurements in millimetres
and inches (in brackets).
Drawing not to scale.
P2 Manual_170x113,3.book Page 2 Wednesday, January 7, 2015 11:47 AM
3
P‐2WASHLIGHT
USERMANUAL
© 2015 SGM®. Information subject to change without notice. SGM and all
affiliated companies disclaim liability for any injury, damage, direct or indirect loss,
consequential or economic loss or any other loss occasioned by the use of,
inability to use or reliance on the information contained in this manual.
The SGM logo, the SGM name and all other trademarks in this document
pertaining to services or products by SGM or its affiliates and subsidiaries are
trademarks owned or licensed by SGM or its affiliates or subsidiaries.
The original edition of this document is in English. All other language editions are
translations of the original edition.
This edition applies to firmware version 1.10 or later.
Rev. 3.00
P2 Manual_170x113,3.book Page 3 Wednesday, January 7, 2015 11:47 AM
4
Dimensions ........................................................................................................................2
Safety information ..............................................................................................................6
Overview ............................................................................................................................9
Parts identification and terminology .................................................................................10
Preparing for installation ..................................................................................................11
Installing the P-2 ..............................................................................................................12
Connecting AC Power ......................................................................................................14
Configuring the device .....................................................................................................15
Connecting to a DMX control device ................................................................................16
Configuring the device for DMX control ...........................................................................17
About DMX .................................................................................................................................................................... 17
Setting the DMX address............................................................................................................................................... 17
Setting the DMX mode................................................................................................................................................... 18
Full Color Calibration and Color Temperature Correction (CTC)................................................................................... 19
Contents
P2 Manual_170x113,3.book Page 4 Wednesday, January 7, 2015 11:47 AM
5
Device personality settings ..............................................................................................20
Setting the dimming curve ............................................................................................................................................. 20
Flipping the OLED display ............................................................................................................................................. 20
Setting the OLED display saver..................................................................................................................................... 20
Setting the fan mode...................................................................................................................................................... 21
Service .............................................................................................................................22
Changing lens module ................................................................................................................................................... 22
Upgrading the firmware ................................................................................................................................................. 25
Cleaning......................................................................................................................................................................... 25
DMX protocols ..................................................................................................................26
Control menu ....................................................................................................................39
Devices and accessories .................................................................................................42
Included items................................................................................................................................................................ 42
Ordering information ...................................................................................................................................................... 42
User’s notes .....................................................................................................................44
P2 Manual_170x113,3.book Page 5 Wednesday, January 7, 2015 11:47 AM
6
Safety information
The P-2 is a multi-environmental device with an IP-rating of 65, intended for professional use only. It is not suitable for
household use. Impropre a l’usage domestique.
Review the following safety precautions carefully before installing or operating the device. This device must be installed in
accordance with the applicable installation code by a person familiar with the construction and operation of the device and the
hazards involved.
Preventing electric shock
• Always power off/unplug the device before removing any covers.
• Ensure that the power is turned off when connecting the device to the AC mains supply.
• Ensure that the device is electrically connected to earth (ground).
• Do not apply power if the device is in any way damaged.
• Do not immerse the device in water or liquid.
WARNING! Read the safety precautions in this section before unpacking,
installing, powering or operating this product.
WARNING! Risk of electric shock.
P2 Manual_170x113,3.book Page 6 Wednesday, January 7, 2015 11:47 AM
7
Preventing burns and fire
• Install in a location that prevents accidental contact with the device.
• Install only in a well-ventilated space.
• Install at least 0.3 m (12 in.) away from objects to be illuminated.
• Install only in accordance with applicable building codes.
• Ensure a minimum clearance of 0.1 m (4 in.) around the cooling fans.
• Do not paint, cover or modify the device.
• Keep all flammable materials away from the device.
• Allow the device to cool for 15 minutes after operation, before touching it.
CAUTION: Exterior surface temperature after 5 min. operation = 45°C (113°F). Steady state = 60°C (140°F).
WARNING! Take measures to prevent burns and fire.
P2 Manual_170x113,3.book Page 7 Wednesday, January 7, 2015 11:47 AM
8
Avoid personal injury
• Do not look directly at the light source from close range.
• Take precautions to prevent injury due to falls when working at height.
• For permanent installation, ensure that the device is securely fastened to a load-bearing surface with suitable
corrosion-resistant hardware.
• For temporary installation with clamps, ensure that the quarter-turn fasteners are turned fully and secured with a suitable
safety cable. The cable must be approved for a safe working load (SWL) of 10 times the weight of the device, and it must
have a minimum gauge of 2 mm.
WARNING! Take measure to prevent personal injury.
P2 Manual_170x113,3.book Page 8 Wednesday, January 7, 2015 11:47 AM
9
Overview
The P-2 is a DMX-controllable, low-profile, IP65-rated, rectangular, LED wash light. It has full RGBW color mixing, color tem-
perature control and incorporates 18 high-power 10W RGBW LEDs divided into 3 individually controllable segments for wide
ranging color and effect combinations. The P-2 offers a variation of beam angles with 15°, 21° or 43° interchangeable lenses.
The P-2 also features dimming, RGB color mixing, color temperature control, a (half-peak) spread angle of 110° and a lamp
life expectancy of 50,000 hours*.
This manual covers installation, use and maintenance of the P-2. All documentation is also available from the SGM web-site:
http://www.sgmlight.com
* At 70% of luminous output under the manufacturer’s test conditions.
P2 Manual_170x113,3.book Page 9 Wednesday, January 7, 2015 11:47 AM
10
Parts identification and terminology
A18 x 10W LEDs
BBase
CSafety wire eyelet
DCooling fan
ETilt brake lock
FDMX in/out
GOLED display
H Control panel
I Power connection
G
E
C
F
D
A
H
I
EE
B
P2 Manual_170x113,3.book Page 10 Wednesday, January 7, 2015 11:47 AM
Otros manuales para P-2 WASH LIGHT
1
Tabla de contenidos
Otros manuales de Foco de SGM
