Selden S30 Manual de usuario
597-489-E
2023-10 -30
Manual
2-speed self-tailing winches
S30, S40, S46, S52, S60
& S66
2
Contents
1 Introduction………………………………………………………................. 3
2 Self-tailing winch, S30-S66 ………………………..…………….............. 4
2.1 Included parts………………………………………………............ 4
2.2 Optional parts ………………………………………………........... 5
2.3 Technicalspecication……………………………………............ 6
3 Installation……………………………………………………………............ 8
3.1 Installation preparation……………………………………............ 9
3.2 Fitting the winch……………………………………………........... 10
3.3 Adjusting the self-tailing arm …………………………............... 12
4 Operation……………………………………………………………............ 13
5 Trouble shooting ………………………………………………….............. 15
6 Service and maintenance ……………………………………….............. 16
6.1 Yearly maintenance ………………………………………........... 16
7 Spare parts ....…………………………………………………...…........... 19
8 Disposal ....…………………………………………………………............ 20
9 Warranty ....…………………………………………………………........... 21
3
1. Introduction
Congratulations on the purchase of your new Series S, self-tailing winch.
This manual cover installation and operating instructions for the S30, S40, S46,
S52, S60 and S66 self-tailing winches. The model designation is found on the
top cover of the winch. Serial number is found on top of the winch base.
Please read the entire manual before assembly/usage and keep the manual
available for future reference. The latest version of this manual is available at
www.seldenmast.com.
Safety Precautions
Carefully pay attention to, and follow, the instructions with the following symbols:
ATTENTION
This symbol indicates a critical moment in the assembly or technical advice.
WARNING
This symbol indicates a potentially hazardous situation. If not avoided, this could
result in serious personal injury or damage to property.
Choosing the correct version of S-winch for your boat:
The key to a safe and properly working installation is correct dimensioning in
relation to the boat size the products shall be used on. Seldén provides dimen-
sioningguidelinesincatalogues,leaetsandonthewebsite.Ifthereareany
questions about selecting the right product, please consult an authorized Seldén
dealer. All dealers are listed at www.seldenmast.com and divided in categories
describing their competence.
Serial number
placed here.
4
2 Seldén Series-S winch, S30-S66
The Seldén S-winches are manually operated and of self-tailing type with two gears forward.
Description Item No. Illustration
Seldén Series S-winch
S30 Aluminium drum 475-130-01
S40 Aluminium drum 475-140-01
S46 Aluminium drum 475-146-01
S52 Aluminium drum 475-152-01
S60 Aluminium drum 475-160- 01
S66 Aluminium drum 475-166-01
Drilling template
S30 597-198-E
S40 597-509-E
S46
597-511-E
S52
S60
597-512-E
S66
Manual for assembly and operation 597- 489-E
Winch tool 473-010
2.1 Included parts
5
2.2 Optional parts
Description Item No. Illustration
10” Race GRIP winch
handle
474 - 501-10
8” Race GRIP winch
handle
474 - 401-10
10” STANDARD winch
handle
474 -301-10
8” STANDARD winch
handle
474 -201-10
Seldén lubrication grease 312–501
Pawl oil (50 ml) 312-709-01
6
2.3 Technical specification
Main components
Top Cover
Self-tailing arm
Drum assembly
Locator
bracket
Winch base
assembly
7
Model Height
(mm)
Base
Ø
(mm)
Drum Ø
(mm)
Suitable
line dimen-
sions
(mm)
Power ratio Weight
(kg)
Safe Wor-
king Load
(SWL, kN)
High
Gear
Low
Gear
S30 150 Ø139 Ø75 8-12 12:1 30:1 2,9 8,4
S40 162 Ø152 Ø75 8-12 13:1 40:1 3,5 11,2
S46 186 Ø184 Ø90 8-14 13:1 46:1 5,8 12,9
S52 186 Ø184 Ø90 8-14 15:1 52:1 5,8 14,6
S60 239 Ø245 Ø120 8-16 18:1 60:1 13,0 16,8
S66 239 Ø245 Ø120 8-16 20:1 66:1 13,1 18,5
Exceeding the recommended max line dimensions may damage the
self-tailing halves and may also cause other damages and/or injury.
Dimensions and technical data
8
3 Installation
Installation of a Seldén Winch must be carried out by a competent installer
who has read and understood this installation manual, the purpose and
function of the winch and has checked the loads, winch sizing and mounting
requirements prior to installation.
Winch orientation, position relative to associated components and location
regarding deck reinforcement and suitability must be checked and any reinforce-
ment work carried out prior to installation. The installer takes full responsibility to
ensure these checks have been undertaken. This may require the assistance of a
boatyardorcertiedmarineengineers.
Seldén Mast does not provide fasteners. The installer is responsible for the sour-
cing and specifying load capacity of the fasteners, ensuring they are rated for the
expected loads from the winch. Any fastener should be made from marine grade
stainless steel.
Seldén Mast AB does not take responsibility for the incorrect installation of a
winch,theinsucientreinforcementofthedeckatthelocationofthewinch,
wateringressduetoinsucientsealingoranydamagetointeriorasaresultof
water ingress.
S30 5 pcs Countersunk M6 screws
S40 4 pcs Countersunk M8 screws
S46/S52 5 pcs Countersunk M8 screws
S60/S66 5 pcs Countersunk M10 screws
Fastener recommendations:
9
3.1 Installation preparation
Winch orientation
For optimum performance during use, the winch must be oriented correctly for
the intended application.
If the winch is to be used for handling of multiple lines, e.g. placed on the coach
roof for use as a halyard winch in combination with running spinnaker or gennaker
sheets, the winch shall be oriented and optimized for the highest load.
LOAD SIDE
10
3.2 Fitting the winch
1.
Use the provided drilling template and
mark and drill holes suitable for the
intended fastening method.
Take special consideration for the winch
orientation before drilling to allow compli-
ance with chapter 3.1, Winch orientation.
(If needed, the drilling template can be
downloaded from www.seldenmast.com.
When printing from the web, scaling
issues may occur. Verify the template
before using.)
2.
Unscrew the top cover using the winch
tool that was supplied with the winch.
3.
Remove the top-cover, the self-tailing
arm and the locator bracket.
4.
Remove the drum.
Otros manuales para S30
3
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Cabrestante de Selden
