Seco SBC-984 Manual de usuario

SBC-984

Single Board Computer

with NXP i.MX6 Processor

SBC-984

All information contained in this manual is related to SBC-984 board with PCB REVC or higher. For boards with PCB REVB or less,

please refer to information contained in SECOμSBC-i.MX6_Manual_Rel_2.0.

Unauthorized use, duplication, modification or disclosure of the information to a third-party by any means without prior consent of SECO S.r.l. is prohibited.

Every effort has been made to ensure the accuracy of this manual. However, SECO S.r.l. accepts no responsibility for any inaccuracies, errors or omissions herein.

SECO S.r.l. reserves the right to change precise specifications without prior notice to supply the best product possible.

For further information on this module or other SECO products, but also to get the required assistance for any and possible issues, please contact us using the

dedicated web form available at http://www.seco.com (registration required).

Our team is ready to assist.

Revision

Date

Note

Ref

1.0

20th June 2013

First Official Release.

2.0

10th March 2014

Updated to rev. B of the PCB

3.0

16th December 2014

New release, suited to rev. C of the PCB

3.1

29th October 2015

RTS# and CTS# signals removed from connector J5. Paragraph 3.3.7 updated

consequently

4.0

26th January 2016

Product name Change

REVISION HISTORY

SBC-984

INDEX

INTRODUCTION.......................................................................................................................................................................... 5Chapter 1.

1.1 Warranty........................................................................................................................................................................................................................................ 6

1.2 Information and assistance............................................................................................................................................................................................................. 7

1.3 RMA number request..................................................................................................................................................................................................................... 7

1.4 Safety............................................................................................................................................................................................................................................ 8

1.5 Electrostatic discharges ................................................................................................................................................................................................................. 8

1.6 RoHS compliance.......................................................................................................................................................................................................................... 8

1.7 Terminology and definitions ............................................................................................................................................................................................................ 9

1.8 Reference specifications .............................................................................................................................................................................................................. 11

OVERVIEW ............................................................................................................................................................................... 12Chapter 2.

2.1 Introduction.................................................................................................................................................................................................................................. 13

2.2 Technical specifications ............................................................................................................................................................................................................... 14

2.3 Electrical specifications ................................................................................................................................................................................................................ 15

2.3.1 Power Consumption ............................................................................................................................................................................................................ 15

2.3.2 RTC Battery.........................................................................................................................................................................................................................17

2.3.3 Power rails naming convention .............................................................................................................................................................................................17

2.4 Mechanical specifications.............................................................................................................................................................................................................18

2.5 Block diagram..............................................................................................................................................................................................................................19

CONNECTORS......................................................................................................................................................................... 20Chapter 3.

3.1 Introduction.................................................................................................................................................................................................................................. 21

3.2 Connectors overview ................................................................................................................................................................................................................... 22

3.3 Connectors description................................................................................................................................................................................................................23

3.3.1 LVDS + backlight connector.................................................................................................................................................................................................23

3.3.2 HDMI connector...................................................................................................................................................................................................................24

3.3.3 Ethernet connector ..............................................................................................................................................................................................................25

3.3.4 USB ports............................................................................................................................................................................................................................ 26

3.3.5 MFG + Audio + Power/Reset buttons connector................................................................................................................................................................... 28

3.3.6 Half-mini PCI-express / mSATA slot......................................................................................................................................................................................29

3.3.7 Serial port RS-232...............................................................................................................................................................................................................30

3.3.8 CAN Bus connector.............................................................................................................................................................................................................31

SBC-984

3.3.9 Debug UART / I2C Touch Connector ...................................................................................................................................................................................31

3.3.10 Camera connector...............................................................................................................................................................................................................32

3.3.11 Recovery jumper..................................................................................................................................................................................................................32

APPENDICES............................................................................................................................................................................ 33Chapter 4.

4.1 Thermal Design............................................................................................................................................................................................................................34

4.2 Accessories.................................................................................................................................................................................................................................35

4.2.1 RS-232 programming kit ASK-825REVB...............................................................................................................................................................................35

4.2.2 WiFi Modules....................................................................................................................................................................................................................... 35

4.2.3 Cabled RTC battery. ............................................................................................................................................................................................................36

4.2.4 CSI Dongle Camera VA09.................................................................................................................................................................................................... 36

4.2.5 Accessories kit CABKIT984REVC.........................................................................................................................................................................................36

4.2.6 7”Display Kit........................................................................................................................................................................................................................37

SBC-984

Chapter 1.

Warranty

Information and assistance

RMA number request

Safety

Electrostatic discharges

RoHS compliance

Terminology and definitions

Reference specifications

SBC-984

1.1Warranty

This product is subject to the Italian Law Decree 24/2002, acting European Directive 1999/44/CE on matters of sale and warranties to consumers.

The warranty on this product lasts for 1 year.

Under the warranty period, the Supplier guarantees the buyer assistance and service for repairing, replacing or credit of the item, at the Supplier’s own discretion.

Shipping costs that apply to non-conforming items or items that need replacement are to be paid by the customer.

Items cannot be returned unless previously authorized by the supplier.

The authorization is released after completing the specific form available on the web-site http://www.seco.com/en/prerma (RMA Online). The RMA authorization

number must be put both on the packaging and on the documents shipped with the items, which must include all the accessories in their original packaging, with

no signs of damage to, or tampering with, any returned item.

The error analysis form identifying the fault type must be completed by the customer and has must accompany the returned item.

If any of the above mentioned requirements for RMA is not satisfied, the item will be shipped back and the customer will have to pay any and all shipping costs.

Following a technical analysis, the supplier will verify if all the requirements, for which a warranty service applies, are met. If the warranty cannot be applied, the

Supplier will calculate the minimum cost of this initial analysis on the item and the repair costs. Costs for replaced components will be calculated separately.

Warning!

All changes or modifications to the equipment not explicitly approved by SECO S.r.l. could impair the equipment’s functionality and could void

the warranty

SBC-984

1.2Information and assistance

What do I have to do if the product is faulty?

SECO S.r.l. offers the following services:

SECO website: visit http://www.seco.com to receive the latest information on the product. In most of the cases it is possible to find useful information to

solve the problem.

SECO Sales Representative: the Sales Rep can help to determine the exact cause of the problem and search for the best solution.

SECO Help-Desk: contact SECO Technical Assistance. A technician is at disposal to understand the exact origin of the problem and suggest the correct

solution. E-mail: technical.servic[email protected]

Fax (+39) 0575 340434

Repair center: it is possible to send the faulty product to the SECO Repair Centre. In this case, follow this procedure:

oReturned items must be accompanied by a RMA Number. Items sent without the RMA number will be not accepted.

oReturned items must be shipped in an appropriate package. SECO is not responsible for damages caused by accidental drop, improper usage, or

customer neglect.

Note: Please have the following information before asking for technical assistance:

Name and serial number of the product;

Description of Customer’s peripheral connections;

Description of Customer’s software (operative system, version, application software, etc.);

A complete description of the problem;

The exact words of every kind of error message encountered.

1.3RMA number request

To request a RMA number, please visit SECO’s web-site. On the home page, please select “RMA Online”and follow the procedure described.

A RMA Number will be sent within 1 working day (only for on-line RMA requests).

SBC-984

Whenever handling a SBC-984 board, ground yourself through an anti-static wrist strap. Placement of the board on an anti-static

surface is also highly recommended.

1.4Safety

The SBC-984 board uses only extremely-low voltages.

While handling the board, please use extreme caution to avoid any kind of risk or damages to electronic components.

1.5 Electrostatic discharges

The SBC-984 board, like any other electronic product, is an electrostatic sensitive device: high voltages caused by static electricity could damage some or all the

devices and/or components on-board.

1.6 RoHS compliance

The SBC-984 board is designed using RoHS compliant components and is manufactured on a lead-free production line. It is therefore fully RoHS compliant.

Always switch the power off, and unplug the power supply unit, before handling the board and/or connecting cables or other

boards.

Avoid using metallic components - like paper clips, screws and similar - near the board when connected to a power supply, to avoid

short circuits due to unwanted contacts with other board components.

If the board has become wet, never connect it to any external power supply unit or battery.

Check carefully that all cables are correctly connected and that they are not damaged.

SBC-984

1.7 Terminology and definitions

AC’97 Audio Codec’97, a standard for audio hardware codecs developed by Intel®in 1997

ACPI Advanced Configuration and Power Interface, an open industrial standard for board’s devices configuration and power management

AHCI Advanced Host Controller Interface, a standard which defines the operations modes of SATA interface

API Application Program Interface, a set of commands and functions that can be used by programmers for writing software for specific Operating

Systems

CAN Bus Controller Area network, a protocol designed for in-vehicle communication

CEC Consumer Electronics Control, an HDMI feature which allows controlling more devices connected together by using only one remote control

CSI2 MIPI Camera Serial Interface, 2nd generation standard regulating communication between a peripheral device (camera) and a host processor

DDC Display Data Channel, a kind of I2C interface for digital communication between displays and graphics processing units (GPU)

DDR Double Data Rate, a typology of memory devices which transfer data both on the rising and on the falling edge of the clock

DDR3 DDR, 3rd generation

DVI Digital Visual interface, a type of digital video display interface

FFC/FPC Flexible Flat Cable / Flat Panel Cable

GBE Gigabit Ethernet

Gbps Gigabits per second

GND Ground

GPI/O General purpose Input/Output

HDMI High Definition Multimedia Interface, a digital audio and video interface

I2C Bus Inter-Integrated Circuit Bus, a simple serial bus consisting only of data and clock line, with multi-master capability

LVDS Low Voltage Differential Signaling, a standard for transferring data at very high speed using inexpensive twisted pairs copper cables, usually used

for video applications

MAC Medium Access Controller, the hardware implementing the Data Link Layer of ISO/OSI-7 model for communication systems

Mbps Megabits per second

MIPI Mobile Industry Processor Interface Alliance

MMC/eMMC MultiMedia Card / embedded MMC, a type of memory card, having the same interface as the SD card. The eMMC is the embedded version of

the MMC, i.e. they are devices that incorporate the memory controller and the flash memories on a single BGA chip

N.A. Not Applicable

N.C. Not Connected

SBC-984

OpenCL Open Computing Language, a software library based on C99 programming language, conceived explicitly to realise parallel computing using

Graphics Processing Units (GPU)

OpenGL Open Graphics Library, an Open Source API dedicated to 2D and 3D graphics

OpenVG Open Vector Graphics, an Open Source API dedicated to hardware accelerated 2D vector graphics

OS Operating System

OTG On-the-Go, a specification that allows to USB devices to act indifferently as Host or as a Client, depending on the device connected to the port

PCI-e Peripheral Component Interface Express

PHY Abbreviation of Physical, it is the device implementing the Physical Layer of ISO/OSI-7 model for communication systems

PSU Power Supply Unit

PWM Pulse Width Modulation

PWR Power

RGMII Reduced Gigabit Media Independent Interface, a particular interface defining the communication between an Ethernet MAC and a PHY

SATA Serial Advance Technology Attachment, a differential half duplex serial interface for Hard Disks

SD Secure Digital, a memory card type

SM Bus System Management Bus, a subset of the I2C bus dedicated to communication with devices for system management, like smart batteries and

other power supply-related devices

SPI Serial Peripheral Interface, a 4-Wire synchronous full-duplex serial interface which contemplates a master and one or more slaves, individually

enabled through a Chip Select line

TBM To be measured

TMDS Transition-Minimized Differential Signaling, a method for transmitting high speed serial data, normally used on DVI and HDMI interfaces

TTL Transistor-transistor Logic

USB Universal Serial Bus

uSDHC Ultra Secure Digital Host Controller

V_REF Voltage reference Pin

Otros manuales de Computadora de placa única de Seco

Seco

Seco SBC-C41-pITX Manual de usuario

Seco

Seco SYS-B68-IPC Guía de inicio rápido

Seco

Seco i-PAN7 Manual de usuario

Seco

Seco THEMIS Manual de usuario

Seco

Seco SBC-C61 Manual de usuario

Seco

Seco EASYSHRINK EVO Manual de usuario

Seco

Seco TANARO Manual de usuario

Seco

Seco SBC ADLER Manual de usuario

Seco

Seco ETX-A61 Manual de usuario

Seco

Seco SBC-C43 Manual de usuario

Seco

Seco SBC-C31 Manual de usuario

Seco

Seco SBC-C23 Manual de usuario

Seco

Seco SYS-B68-IGW Guía de inicio rápido

Seco

Seco SBC-C20 Manual de usuario

Seco

Seco SANTINO LT core Manual de usuario

Seco

Seco SYS-C31-DMV Instrucciones de uso

Seco

Seco SECOnITX-ION Manual de usuario

Manuales populares de Computadora de placa única de otras marcas

WIN Enterprises

WIN Enterprises PL-80910 Manual de usuario

AXIOMTEK

AXIOMTEK SBC81206 Series Manual de usuario

Embest

Embest SOM-PH8800 Manual de usuario

SeaLevel

SeaLevel SBC-R9 Manual de usuario

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manual de usuario

WinSystems

WinSystems PPM-LX800-G Manual de usuario

GIGAIPC

GIGAIPC QBiX-PPC Series Manual de usuario

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manual de usuario

Commell

Commell FS-978 Manual de usuario

GIGAIPC

GIGAIPC QBiP-8665A/ Manual de usuario

VersaLogic

VersaLogic Python EBX-11 Manual de usuario

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manual de usuario

CompuLab

CompuLab SB-A510 Manual de usuario

Boser

Boser HS-7321 Manual de usuario

Premier Farnell

Premier Farnell Embest SBC8530 Manual de usuario

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manual de usuario

Aaeon

Aaeon UP Manual de usuario

Portwell

Portwell WUX Series Manual de usuario