GIGAIPC QBiP-8665A/ Manual de usuario

3.5” SBC Boards QBiP-8665A/ QBiP-8365A

1www.gigaipc.com GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

QBiP-8665A/ QBiP-8365A

3.5” SBC Boards

User’s Manual 1st Ed

www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

This document is copyrighted, 2021. All rights are reserved. The original

manufacturer reserves the right to make improvements to the products

described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in

this manual is intended to be accurate and reliable. However, the

original manufacturer assumes no responsibility for its use, or for any

infringements upon the rights of third parties that may result from its

use.

The material in this document is for product information only and is

subject to change without notice. While reasonable efforts have been

made in the preparation of this document to assure its accuracy, GIGAIPC

assumes no liabilities resulting from errors or omissions in this document,

or from the use of the information contained herein.

GIGAIPC reserves the right to make changes in the product design

without notice to its users.

3.5” SBC Boards QBiP-8665A/ QBiP-8365A

3www.gigaipc.com GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

Acknowledgement

All other products’ name or trademarks are properties of their respective

owners.

• AMD® is trademark of Advanced Micro Devices.

• Microsoft Windows is a registered trademark of Microsoft Corp.

• Intel, Pentium, Celeron, and Xeon are registered trademarks of Intel

Corporation

• Core, Atom are trademarks of Intel Corporation

• ITE is a trademark of Integrated Technology Express, Inc.

• IBM, PC/AT, PS/2, and VGA are trademarks of International Business

Machines Corporation.

All other product names or trademarks are properties of their respective

owners.

www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

Packing List

Before setting up your product, please make sure the following items

have been shipped:

Item Quantity

QBiP-8665A/ QBiP-8365A 1

SATA power cable 1

If any of these items are missing or damaged, please contact your

distributor or sales representative immediately.

3.5” SBC Boards QBiP-8665A/ QBiP-8365A

5www.gigaipc.com GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

About this Document

This User’s Manual contains all the essential information, such as detailed

descriptions and explanations on the product’s hardware and software

features (if any), its specifications, dimensions, jumper/connector

settings/definitions, and driver installation instructions (if any), to facilitate

users in setting up their product.

Users may refer to the GIGAIPC.com for the latest version of this

document.

www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

Safety Precautions

Please read the following safety instructions carefully. It is advised that

you keep this manual for future references

1. All cautions and warnings on the device should be noted.

2. Make sure the power source matches the power rating of the

device.

3. Position the power cord so that people cannot step on it. Do not

place anything over the power cord.

4. Always completely disconnect the power before working on the

system’s hardware.

5. No connections should be made when the system is powered

as a sudden rush of power may damage sensitive electronic

components.

6. If the device is not to be used for a long time, disconnect it from

the power supply to avoid damage by transient over-voltage.

7. Always disconnect this device from any AC supply before cleaning.

8. While cleaning, use a damp cloth instead of liquid or spray

detergents.

9. Make sure the device is installed near a power outlet and is easily

accessible.

10. Keep this device away from humidity.

11. Place the device on a solid surface during installation to prevent

falls

12. Do not cover the openings on the device to ensure optimal heat

dissipation.

13. Watch out for high temperatures when the system is running.

3.5” SBC Boards QBiP-8665A/ QBiP-8365A

7www.gigaipc.com GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

14. Do not touch the heat sink or heat spreader when the system is

running

15. Never pour any liquid into the openings. This could cause fire or

electric shock.

16. As most electronic components are sensitive to static electrical

charge, be sure to ground yourself to prevent static charge when

installing the internal components. Use a grounding wrist strap

and contain all electronic components in any static-shielded

containers.

17. If any of the following situations arises, please the contact our

service personnel:

i. Damaged power cord or plug

ii. Liquid intrusion to the device

iii. Exposure to moisture

iv. Device is not working as expected or in a manner as described

in this manual

v. The device is dropped or damaged

vi. Any obvious signs of damage displayed on the device

18. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED

ENVIRONMENT WITH TEMPERATURES BEYOND THE DEVICE’S

PERMITTED STORAGE TEMPERATURES (SEE CHAPTER 1) TO

PREVENT DAMAGE.

www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

FCC Statement

This device complies with Part 15 FCC Rules. Operation is

subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must

accept any interference received including interference that

may cause undesired operation.

Caution:

There is a danger of explosion if the battery is incorrectly replaced. Replace only with

the same or equivalent type recommended by the manufacturer. Dispose of used

batteries according to the manufacturer’s instructions and your local government’s

recycling or disposal directives.

Attention:

Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.

Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur.

Recycler les batteries usées en accord avec les instructions du fabricant et les directives

gouvernementales de recyclage.

3.5” SBC Boards QBiP-8665A/ QBiP-8365A

9www.gigaipc.com GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

China RoHS Requirements (CN)

产品中有毒有害物质或元素名称及含量

GIGAIPC Main Board/ Daughter Board/ Backplane

部件名称

有毒有害物质或元素

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

印刷电路板

及其电子组件 ○ ○ ○ ○ ○ ○

外部信号

连接器及线材 ○ ○ ○ ○ ○ ○

O：表示该有毒有害物质在该部件所有均质材料中的含量均在

SJ/T 11363-2006 标准规定的限量要求以下。

X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出

SJ/T 11363-2006 标准规定的限量要求。

备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。

www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

China RoHS Requirement (EN)

Poisonous or Hazardous Substances or Elements in Products

GIGAIPC Main Board/ Daughter Board/ Backplane

Component

Poisonous or Hazardous Substances or Elements

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

Chromium

(Cr(VI))

Polybrominated

Biphenyls

(PBB)

Polybrominated

Diphenyl

Ethers (PBDE)

PCB & Other

Components O O O O O ○

Wires &

Connectors

for External

Connections

O O O O O O

O：The quantity of poisonous or hazardous substances or elements found in each

of the component's parts is below the SJ/T 11363-2006-stipulated requirement.

X: The quantity of poisonous or hazardous substances or elements found in at least

one of the component's parts is beyond the SJ/T 11363-2006-stipulated requirement.

Note: The Environment Friendly Use Period as labeled on this

product is applicable under normal usage only

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Computadora de placa única de GIGAIPC

GIGAIPC

GIGAIPC QBiP-1900AT Manual de usuario

GIGAIPC

GIGAIPC QBiX-Pro-ADLA1255H-A2 Manual de usuario

GIGAIPC

GIGAIPC QBiP-1165G7B Manual de usuario

GIGAIPC

GIGAIPC QBiP-4200B Manual de usuario

GIGAIPC

GIGAIPC QBiP-4200D Manual de usuario

GIGAIPC

GIGAIPC QBi-6412A Manual de usuario

GIGAIPC

GIGAIPC QBi-1165G7A Manual de usuario

GIGAIPC

GIGAIPC QBiX-WP-WHLA8265H-A1 Manual de usuario

GIGAIPC

GIGAIPC QBiP-7100A Manual de usuario

GIGAIPC

GIGAIPC QBiP-4200A Manual de usuario

GIGAIPC

GIGAIPC QBiP-8145A Manual de usuario

GIGAIPC

GIGAIPC QBiP-1255A Manual de usuario

GIGAIPC

GIGAIPC QBiP-8565A Manual de usuario

GIGAIPC

GIGAIPC QBiP-1215EA Manual de usuario

GIGAIPC

GIGAIPC QBiX-PPC Series Manual de usuario

Manuales populares de Computadora de placa única de otras marcas

WIN Enterprises

WIN Enterprises PL-80910 Manual de usuario

AXIOMTEK

AXIOMTEK SBC81206 Series Manual de usuario

Embest

Embest SOM-PH8800 Manual de usuario

SeaLevel

SeaLevel SBC-R9 Manual de usuario

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manual de usuario

WinSystems

WinSystems PPM-LX800-G Manual de usuario

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manual de usuario

Commell

Commell FS-978 Manual de usuario

VersaLogic

VersaLogic Python EBX-11 Manual de usuario

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manual de usuario

CompuLab

CompuLab SB-A510 Manual de usuario

Boser

Boser HS-7321 Manual de usuario

Premier Farnell

Premier Farnell Embest SBC8530 Manual de usuario

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manual de usuario

Aaeon

Aaeon UP Manual de usuario

Portwell

Portwell WUX Series Manual de usuario

Lanner electronics

Lanner electronics IAC-F847 Series Manual de usuario

Epson

Epson S5U1C88816P Manual de usuario