Schlage Artus Manual de usuario

Schlage Artus

NARROW PROFILE SMART LOCK

Quick Start Guide

Parts

Box contents Door thickness

35mm-60mm

Tools required

Tape measure

Pencil

Level

Drill

Drill bit - 10mm

Hole saw - 20mm

Screwdriver (Phillips)

Fixing pack

Door thickness Screw post Screw Spindle Mortice screw

35mm-42mm M5*35mm x 1 M5*30mm x 1

M5*50mm x 1 7.8*7.8*60mm x 1 Aluminium Door:

M3.9*16mm x 5

Wooden Door:

M4*20mm x 5

43mm-60mm M5*35mm x 1 M5*40mm x 1

M5*60mm x 1 7.8*7.8*80mm x 1

External lock body Internal lock body Gaskets Keys and tags

For more information visit schlage.co.nz/artus

Mortice lock included with kitsets

Installation

Exterior assembly

1. Prepare the door

Interior assembly

Keypad A. Follow the Schlage

Artus template to

prepare your door.

B. Mount lockbody

into position.

A. Attach the post

to the lower stud

on the back of the

external unit.

B. Attach the second

post to the xing

post screw. Slide

the screw head

into the slot on

the top of the back

of the external unit.

Loosely tighten post

to screw to allow

free movement.

2. Fasten posts

Battery cover

Reset button

Cylinder

3. Handing (as required) 5. Attach gaskets

2 3

Insert hex key into the

spindle hole, remove

screw to loosen the

lever. Rotate the lever

180° and tighten the

screw to reattach the

lever. Repeat for the

internal unit.

Attach and secure rubber

gaskets to the internal and

external units.

A. Insert spindle into

the hub.

B. Ensure the spindle

holder arrow points

in the direction of

the lever.

Position the external

unit to sit ush on

the door, ensuring

the cable and

spindle go through

the xing holes.

Adjust the top xing

post to align with

the top xing hole.

4. Adjust spindle holder direction 6. Position external unit to the door

Arrow

7. Position internal unit to the door 9. Install batteries

Remove battery

cover from

internal unit.

A. Connect

cables

ensuring

excess cable

is concealed

inside the

door.

B. Line up

spindle to the

spindle hole

in the body of

the unit.

A. Install 4x AA alkaline

batteries.

B. Secure the battery

cover with screw.

Afx the internal and

external units using the

xing screws.

With the door in the open position test

lock operation;

A. Rotate the external lever, ensure latch bolt

does not retract (refer to step 4).

B. Rotate the internal lever, ensure latch

bolt does retract.

Test operation using

code 123456#

(ignore voice

prompt during test).

8. Afx units to door 10. Test latch operation

15mm

35mm

B. A.

Pair and programme lock

IMPORTANT:

Note for installer

Administrator code set up

Once the lock is installed on the door, the lock

requires the default admin code to be changed.

Refer to manual lock operation on page 8 to

change the default admin code and set new

PIN code/s.

Once PIN code/s are set, the lock voice command

will no longer prompt for the lock to be paired to

a mobile device.

Get mobile access with

Schlage Breeze

For an enhanced experience and additional

functionality, we recommend you download the

Schlage Breeze mobile app from the Apple App

Store or the Google Play Store.

Apple App Store Google Play Store

1. Create a user account using your email address

(or login if you have an existing account).

2. Ensure Bluetooth is enabled on your phone, tap

the keypad of your Schlage Artus lock to activate it.

3. To pair the lock with the app, click on the + and

follow the instructions on the app.

IMPORTANT:

Note for homeowner

Manual factory reset

If your lock was installed by someone other than

yourself, we highly recommend you complete a

factory reset on the lock to ensure all previously

set PIN codes are successfully deleted.

1. Remove the battery cover and using a

pointed object, press the reset button for 4

seconds (refer to page 2 for the location of

the reset button).

2. The lock will prompt to enter a setup code.

At this point enter 000# on the keypad.

3. The lock will prompt that the reset procedure

is complete.

4. The lock is now available to be paired with a

mobile device using the Schlage Breeze app.

Within the Schlage Breeze app, users have access

to more features than those available on the lock

itself. This guide provides information on many of

the features available.

Status of lock

Use the locked and unlocked

icons to easily lock or unlock

your door, or simply to check

the status of the lock (locked

or unlocked).

PIN codes

The Schlage Artus allows you to store up to

150 PIN codes - either custom, permanent,

recurring or scheduled.

Default master PIN code is 123456#

Master PIN codes must contain 6-11 digits

Custom created codes can contain 4-9 digits

To add a new PIN code, use the Grant Access icon,

add PIN code. For a customised PIN code, use the

custom feature, add your guest’s name, and set

your PIN code.

To manage your PIN codes, select Manage Access

and update or delete user access as required.

Virtual keys

When you regularly need to share

access to many guests, you can

message them PIN code access.

This is a great solution for home

share properties. Select Grant

Access, Invite Breeze User and

enter the details for your guest.

You can share this virtual key by

various options including email or

text message.

Key tags

The Schlage Artus allows you

to store up to 200 key tag

credentials. Three key tags are

provided with your Schlage Artus

lock, additional key tags can be

purchased through your local

door hardware retailer.

To set up your key tags, select

Grant Access, Add Credential,

ensure you name your key tag

and complete set up of your

credential.

To manage your credentials, select Manage Access

and update or delete user access as required.

Auto locking

The Schlage Artus lock default is set with a 5

second auto lock, this can be changed in the

Settings, Auto Lock function by selecting a

different time delay.

Schlage Breeze app

user functions

Passage mode

The lock can be switched to

passage mode in the Schlage

Breeze app within the Settings

function. In this mode, the

internal and external lever is

unlocked, and you may enter

freely. You can either set specic

days/times to operate passage

mode or disable this feature.

When passage mode is in

operation, you may still lock

the unit externally by holding the

# key for 3 seconds. It will resume passage mode

when unlocked via PIN, key tag or key override

until the passage mode period completes or the

feature is disabled via the Schlage Breeze app.

Clock

After installation of your lock and registering for

the Schlage Breeze app, the clock is automatically

set to your local time. The lock has a feature within

the Settings function to change to daylight savings,

if you use the scheduled PIN code feature, ensure

you change to current daylight savings time to

ensure the correct time is used by the lock.

Lock notications history

To view the audit trail of when

the lock was used and by

which user, select History. This

provides information on your

users, timing, or any attempts

of adding incorrect PIN codes.

Resetting your lock

We recommend you reset your lock for greater

security if you have recently purchased a home and

there may have been other users of your lock. Your

lock can be reset either in the Schlage Breeze app

or on the Schlage Artus lock.

Within the Schlage Breeze app:

1. Select Settings, then scroll to the bottom and

select the Delete button.

2. Enter your account password – this is the

password you used when you registered the

Schlage Breeze app.

3. The Delete button, resets the lock and unpairs

the Schlage Breeze app, so that it can be re-

paired with another mobile phone.

To manually reset your lock refer to page 5.

Lock sound

To enable or disable the lock sound select Settings,

Lock Sound.

Note, by disabling the sound, both the lock voice

prompts and beeps will be disabled.

Sarah

Rachel

Mike

Grandpa

Follow this simple chart if you are manually programming your lock.

Further lock functions are available using the Schlage Breeze app, refer to pages 5-7 for more information.

Manual lock operation

Hardware specications

Item Specications Notes

External and

internal assemblies 314mm (L) x 43mm (W) x 25mm (D) Operation temperature: -30ºC to 55ºC

Battery AA alkaline battery x 4

(Operation voltage: 4.8 to 6V) Lasts 6-12 months depending on usage

Change

Default

Admin Code

Press

New admin code

Repeat

Change

Admin Code

Press

Admin code

Press

Repeat

New admin code

Add

User Code

Press

Admin code

Press

Repeat

New user code

Passwords

Delete All

Press

Admin code

Press

Key Tag

Add

Press

Admin code

Press

Present

One or more key tags

Key Tags

Delete All

Press

Admin code

Press

8 9

Schlage Artus

lock functions

Refer to the manual lock operation on page 8 for

further instructions on manually programming

your lock.

Deadbolt operation

For additional security when

locking your Schlage Artus lock,

rotate the lever upwards to

operate the deadbolt.

Upon re-entry, enter your PIN

code followed by the hash, rotate

the lever downwards to retract

the deadbolt and latch and unlock

your door.

Random PIN code

This security feature allows a user to randomly enter

digits before and/or after the PIN code to prevent

the user PIN code from being exposed.

Tamper alert

The Schlage Artus lock allows for four attempts

to correctly input your code, on the fth incorrect

entry the lock alarm will sound. The alarm sounds

for 30 seconds, during this time you cannot

continue to enter PIN codes. You can however

unlock the lock through the Schlage Breeze app

which will also turn the lock alarm sound off.

Low battery notication

The keypad ashes to notify you when the battery

is low, with a voice prompt saying, ‘Battery low

please replace’. Also, while in the Schlage Breeze

app, the app will display a low battery notication.

Tips

• To activate and illuminate

the keypad, press the # key.

• Always enter the # key after

entering your PIN code.

Fake

User

Fake

User

Tabla de contenidos

Otros manuales de Cerradura de puerta de Schlage

Schlage

Schlage BE469 Manual de usuario

Schlage

Schlage CM5100-KPI Manual de usuario

Schlage

Schlage 7766 Manual de usuario

Schlage

Schlage CO-Series Manual de usuario

Schlage

Schlage CO-250 Manual de usuario

Schlage

Schlage LT Series Manual de usuario

Schlage

Schlage Touch FE695 Lever Manual de usuario

Schlage

Schlage Encode Manual de usuario

Schlage

Schlage FC60 Manual de usuario

Schlage

Schlage BE365 Manual de usuario

Schlage

Schlage L9000 Series Manual de usuario

Schlage

Schlage KING COBRA-2 KC5196-2-R Instrucciones de funcionamiento

Schlage

Schlage BR260 Manual de usuario

Schlage

Schlage L9080EL Manual de usuario

Schlage

Schlage Ease S2 Manual de usuario

Schlage

Schlage ND10 Manual de usuario

Schlage

Schlage B660 Manual de usuario

Schlage

Schlage Connect Smart Deadbolt Manual de usuario

Schlage

Schlage SchlageTouch BE375 Manual de usuario

Schlage

Schlage SCHLAGETOUCH Manual de usuario

Schlage

Schlage BE468 series Manual de usuario

Schlage

Schlage L-SERIES Manual de usuario

Schlage

Schlage SENSE Manual de usuario

Schlage

Schlage Connect BE469ZP Manual de usuario

Manuales populares de Cerradura de puerta de otras marcas

Assa Abloy

Assa Abloy effeff 827A-IP Manual de usuario

We.lock

We.lock SECBNEBL51 Manual de usuario

Iseo

Iseo MA1A Manual de usuario

ID Lock

ID Lock 150 Manual de usuario

Lockly

Lockly ACCESS TOUCH PRO Manual de usuario

iLoq

iLoq G50S Manual de usuario

SDC

SDC Z7835 Manual de usuario

ilco

ilco 452 Manual de usuario

Samsung

Samsung shs-h705 Manual de usuario

TRU-BOLT

TRU-BOLT 08102017 Manual de usuario

CDVI

CDVI 500-LADJ Manual de usuario

Igloohome

Igloohome Deadbolt 2S Metal Grey Instrucciones de instalación y mantenimiento

eSSL

eSSL FL-300 Manual de usuario

JAKO

JAKO JKBTNX4 Manual de usuario

Dorma

Dorma MUNDUS PREMIUM GK 50 Guía del usuario

SCOOP

SCOOP Pullbloc 4.1 FS Panik Manual de usuario

Yale

Yale MORTISE 8800 SERIES Manual de usuario

Siegenia

Siegenia KFV AS3500 Manual de usuario