4
Operating temperature range 5 - 40°C (ambient)
Humidity < 85%
Pressure 700 - 1060 hpa
Power supply 220V - 240 V
Frequency 50 Hz
EU Standard
Indoor use only: SaunaMed Saunas are primarily aimed at the domestic market.
Although a SaunaMed may be suitable for light commercial use, we do not recommend a SaunaMed
for heavy commercial use, for example, public gyms, spas, and leisure centres.
Please contact us for information on site-specific suitability and commercial grade saunas.
Do not install closer than 12.7mm (0.5 inches) to a wall.
Operating conditions
Features
Wooden construction
Digital microprocessor controlled
Temperature adjustable from 20°C – 60°C (5°C increments)
Adjustable dwell time from 0 to 60 minutes
Digital temperature sensor
Soft touch keypad
Long-life DuraWaveTM EMR NeutralTM pure ceramic FAR infrared heaters
Maintenance
Clean the sauna room with a soft wet cloth or sauna cleanser. NEVER use alcohol, benzene
or any other corrosive chemical to clean the unit.
No maintenance or service of electronic components is required unless faulty. Please consult
with the retailer or a qualified electrician if in doubt.
Transportation and storage
Avoid exposure to rain, snow, or other harsh environments during transport.
When in transit, handle the sauna unit with care.
Do not store in damp or humid environments.
Ensure that the unit is installed on a level surface. Uneven surfaces may result in pooling and
water ingress if the unit is installed in a bathroom; this can cause warping of the wooden
floor module.
If the surface on which the unit is installed is uneven and/or likely to be frequently exposed
to moisture, place the unit on levelling supports to raise it above the floor.
