SATO LM400e Series Manual de usuario

LM400e Series

SATO ASIA PACIFIC PTE. LTD.

438A ALEXANDRA ROAD

#05-01/04 ALEXANDRA TECHNOPARK

SINGAPORE 119967

Tel: (65) 6271 5300

Fax: (65) 6273 6011

Sales Hotline: (65) 6276 2722

Service Hotline: (65) 6273 6455

Email: [email protected]

Website: www.satoworldwide.com

Be sure to ask your dealer about our maintenance contracts

to ensure peace of mind during your usage of SATO products

SATO International

Warning: This equipment complies with the requirements in Part 15 of FCC rules for

a Class A computing device. Operation of this equipment in a residential area may

cause

unacceptable interference to radio and TV reception requiring the operator to take

whatever steps are necessary to correct the interference.

parties in any form whatsoever without the express permission of SATO. The

materials in this document are provided for general information and are subject to

change without notice. SATO assumes no responsibilities for any errors that may

appear.

Version: SI-LM4xxe-01rA-16-01-OM

Features of LM400e Series



The LM400e Series – the rugged industrial generation of high performance

printers with high resolution capabilities. The LM400e is a user-friendly printer

providing high throughput and print speed in barcode label production.



Superior print performance

The LM400e ensures high print quality, enlarges and prints various types of

fonts in a free layout.



Operation panel and LCD display

The LM400e is user-friendly and operable using two keys on the operation

panel. The instruction messages to be displayed on the LCD screen will show

you how to use this printer.





Durability and easy handling

The LM400e Series printers feature a heavy-duty print mechanism for barcode

label production in large quantity and ensure great durability.

An easy care and cleaning step are provided for daily use.



Ⅰ

Safety Precautions

This Quick Guide contains important information for safety of the user.

To insure proper use, please read these Safety Precautions before using this product.

▲Pictograph Descriptions

The following pictograph descriptions are used in this Quick Guide and on the

printer for safety of the user and others as well as the prevention of damage or loss

to property. Descriptions for the pictographs and symbols used in these instructions

are included below. Make sure you understand them before reading the main text.



Warning This indicates that there is a strong likelihood that improper

handling will lead to serious injury or even death.



Caution This indicates that improper handling poses a strong risk of

injury to the user or damage to property.



Meaning of pictographs

: Improper handling may cause electric shock.



Improper handling may lead to serious injury.



: Prohibited (restricted) actions.



: Disassembly prohibited.



Ⅱ



: Do not dispose the printer by fire, or expose it to heat, or put in fire.



: Unplug the printer from power outlet.



: Connect ground wire to ground slot.



Warning

: Place the printer on a surface that is flat and level

●Do not leave the printer on unstable surfaces. If the printer falls and

hits someone, it could cause injury.



: Do not expose the printer to liquids or moisture

●Do not place objects filled with liquids, such as beverages, vases,

or chemical product near the printer. Also, do not place small metal

objects near the printer. If the liquids have been spilled or objects

have fallen into the printer, turn off the power immediately,

disconnect the power cord from the power outlet, and contact your

nearest dealer, service center or the store where you purchased

the printer. Continue use of the printer in this condition may cause

fire or electric shock.



: Do not insert foreign material into the printer

●Do not insert or drop any metal objects or flammable objects into

the openings (cable end, socket for interface connection). If the

foreign material has fallen into the printer, turn off the power

immediately, disconnect the power cord from the power outlet, and

contact your nearest dealer or service center or the store where

you purchased the printer. Continue use of the printer in this

condition may cause fire or electric shock.



Ⅲ

: Use only the designated electrical power and voltage

●Use the type of power source indicated on the printer. Different

voltage may cause fire or electric shock.

: Connect ground wire

●Make sure to connect the ground wire of the printer to the ground

slot. Failure to do so may cause electric shock.



Warning

: Power cord

●Do not attempt to damage, break, or modify the power cord. Also,

avoid placing a heavy object on, heating, or pulling the power cord.

This may damage the power cord causing fire and electric shock.

●If the power cord becomes damaged in any way (exposed cable

core, breaking of wire), contact your nearest dealer, service center

or the store where you purchased the printer. Continue use of

damaged power cord may cause fire or electric shock.

●Do not attempt to modify, jerk, knot, sharply bend, or otherwise

abuse the power cord. Continue use of damaged power cord may

cause fire or electric shock.

: In case of drop or damage

●If the printer was dropped or damaged, turn off the power

immediately, disconnect the power cord from the power outlet, and

contact your nearest dealer, service center or the store where you

purchased the printer. Continue use of the printer in this condition

may cause fire or electric shock.

: Do not use the printer in abnormal condition

●In the case of abnormalities such as smoke or foul odors from the

printer, stop using the printer immediately. Continue use of the

printer in this condition may cause fire or electric shock. Turn off

the power immediately, disconnect the power cord from the power

Ⅳ

outlet, and contact your nearest dealer, service center or the store

where you purchased the printer. Do not attempt to repair the

printer yourself.

: Do not disassemble

●Do not attempt to disassemble or modify the printer. Fire or electric

shock may occur. For service and repair of internal problem,

please contact your nearest dealer or service center or the store

where you purchased the printer for assistance.

Caution

: Do not use in locations with high humidity

●Do not place the printer in any places where it will be subjected to

high humidity or condensation.

If condensing, turn off the power switch immediately, stop using it

and dry completely without using any heat producing devices.

Continued use under these conditions may cause electric shock.



: Carrying the printer

●Disconnect the power cord from a power outlet before moving the

printer to other places. Leaving it connected and moving the printer

will damage to the cord and connections. This may cause fire or

electric shock.

●Do not carry the printer when the label is set. If the label falls and

hits someone, it could cause injury.

●When placing the printer on the floor or the table, be careful not to

get your fingers or hands caught in the legs of the printer.

: Power supply

●Do not touch the power switch, replace the fuse, or plug-in/unplug

the power cord with wet hands. This may cause electric shock.



: Power cord

●Keep the power cord out of any appliances that produce heat. This

may melt the coating of power cord and cause fire or electric

Ⅴ

shock.

●When disconnecting the power cord from the printer or a power

outlet, pull on the plug. If not, it may cause exposure of wire,

breaking of wire, overheating, fire or electric shock. 

: Replacing fuse

●Disconnect the power cord from a power outlet before replacing

the fuse.



: Cover

●When opening/closing the cover, be careful not to get your fingers

caught. Hold the cover tightly and stop it from dropping down.



: Thermal head

●Thermal head will become hot during the printing process. When

changing carbon ribbon and labels or when cleaning after printing,

be careful not to get burnt.

●Contact with the edge of thermal head with bare hands may cause

injury. When changing the carbon ribbon and labels or when

cleaning, be careful not to get injured.

●Do not replace the thermal head by yourself. Doing so may result

in injuries, burns or electric shock.

: Opening and closing thermal head

●Do not insert foreign material other than carbon ribbon and labels

when opening/closing the thermal head. This may result in injury or

malfunction.



: Setting labels

●When setting the roll labels, please be careful not to get your

fingers caught between the label and label supply spindle.



: When unused for long periods of time

●Disconnect the power cord from a power outlet when unused for

long periods of time.

Ⅵ

: Maintenance and cleaning

●Disconnect the power cord from a power outlet when maintaining

or cleaning the printer.



Ⅶ



Table of Contents



●Precautions for installation and handling……………………………..1, 2, 3

●Unpacking……………………………………………………………………...4

●Accessories…………………………………………………………………….5

●Names of parts…………………………………………………………..6, 7, 8

●Setting roll label……………………………………………………….9, 10, 11

●Setting fan-fold label………………………………………………..12, 13, 14

●Setting carbon ribbon……………………………………………….15, 16, 17

●Adjusting pitch sensor……………………………………………………….18

●Turning on power………………………………………………………..19, 20

●LM400e Series specifications………………………………………………21



Tabla de contenidos

Otros manuales de Etiquetadora de SATO

SATO

SATO HT200e Manual de usuario

SATO

SATO LT408 Manual de usuario

SATO

SATO Argox D4 Series Manual de usuario

SATO

SATO SX4M Manual de usuario

SATO

SATO s84ex Manual de usuario

SATO

SATO TH2 Series Manual de usuario

SATO

SATO CT400i Series Manual de usuario

SATO

SATO TH2 Series Manual de usuario

SATO

SATO RFID Manual de usuario

SATO

SATO TG3 Series Manual de usuario

SATO

SATO s84ex Manual de usuario

SATO

SATO CG408 DT/TT Manual de usuario

SATO

SATO SG112-ex Manual de usuario

SATO

SATO s84ex Manual de usuario

SATO

SATO CL4NX RIDF Hoja de instrucciones

SATO

SATO CX Series Manual de usuario

SATO

SATO CT 400 Manual de usuario

SATO

SATO s84ex Manual de usuario

SATO

SATO PB1 Series Manual de usuario

SATO

SATO CX200 Manual de usuario

SATO

SATO PB2-180 Manual de usuario

SATO

SATO CX Series Manual de usuario

SATO

SATO CX208 Manual de usuario

SATO

SATO Argox D2 Series Manual de usuario

Manuales populares de Etiquetadora de otras marcas

Brother

Brother P-Touch 2420PC Manual de usuario

newell

newell Dymo LabelManager 210D Manual de usuario

Brother

Brother TD-4000 Manual de usuario

U-Line

U-Line BROTHER H-8754 Manual de usuario

Tharo Systems

Tharo Systems H-435+ Manual de usuario

Brother

Brother E300 Manual de usuario

Godex

Godex RT700 SERIES Manual de usuario

ID Technology

ID Technology 252 Manual de usuario

Labelmate

Labelmate MC-11 Manual de usuario

CAB

CAB XD4M/300 Manual de usuario

Avery Dennison

Avery Dennison Pathfinder 6057 Manual de servicio

Brother

Brother P-touch PT-9700PC Manual de usuario

TSC

TSC PEX1000 Series Manual de usuario

Adkins

Adkins Label Master Manual de usuario

Epson

Epson LabelWorks LW-400 Manual de usuario

Primera

Primera 510212 Manual de usuario

Brady

Brady BradyPrinter S3100 Manual de usuario

DuraLabel

DuraLabel LabPRO Manual de usuario