SatLab SL600 Manual de usuario
SL600 GNSS
Receiver User’s Manual
www.satlabgps.com Satlab SL600 User’s Guide, Rev. 1.5, December 2014.
©2014 Satlab Geosoluon AB. All rights reserved.
www.satlabgps.com
2
Legal Noces
©2014 Satlab Geosoluon AB. All rights reserved.
All product and brand names menoned in this publicaon are trademarks of their respecve holders.
Satlab SL600 User’s Guide, Rev. 1.5, December 2014.
Limited Warranty
Supplier hereby warrants solely to the end user customer of the Products, subject to the exclusions and procedures set forth
herein below, that the Products sold to such end user customer shall:
(a) perform in accordance with the specicaons for such Products, and
(b) be free, under normal use and maintenance, from defects in material and workmanship for a period of 24
(twenty-four) months from the date of delivery to such end user customer.
Repairs and replacement components are warranted, subject to the exclusions and procedures set forth below, to be free,
under normal use and maintenance, from defects in material and workmanship for 90 (ninety) days from:
(a) delivery of the repaired Product or replacement component to the end user customer, or
(b) for the balance of the original warranty period, whichever is greater.
Purchaser’s Exclusive Remedy
The end user customer’s exclusive remedy under this warranty shall be limited to the repair or replacement, at the sole opon
of Supplier, of any defecve Products or components thereof. The Dealer shall nofy Supplier immediately of any claimed
defect. Repairs shall be made through a Supplier-approved service center only.
To obtain warranty service, the buyer must return the Product, postage-paid, with proof of the date of original purchase and
the buyer’s return address to the Supplier or an authorized service center. The Supplier will not be responsible for any loss or
damage to the product incurred while it is in transit or is being shipped for repair. It is the buyer’s responsibility to arrange for
insurance, if the buyer so desires.
Exclusions
Supplier does not warrant:
(a) damage occurring in transit or due to misuse, abuse, improper installaon, neglect, lightning (or other electrical
discharge) or fresh/salt water immersion of Products;
(b) claims asserted aer the end of the warranty period;
Repair, modicaon or service of Products by any party other than a Supplier-approved service center shall render this
warranty null and void.
Supplier does not guarantee the precision or accuracy of posions obtained when using Products. The potenal accuracy
of Products as stated in Supplier literature and/or Product specicaons serves to provide only an esmate of achievable
accuracy based on:
• Specicaons provided by the US Department of Defense for GPS Posioning,
• GNSS OEM Receiver specicaons of the appropriate manufacturer, and
• DGPS service provider performance specicaons.
Limitaon of Liability
THE EXTENT OF SUPPLIER’S LIABILITY FOR DAMAGES OF ANY NATURE TO DEALER, THE END USER CUSTOMER OR ANY OTHER
PERSON OR ENTITY WHETHER IN CONTRACT OR TORT AND WHETHER TO PERSONS OR PROPERTY SHALL IN NO CASE EXCEED,
IN THE AGGREGATE, THE COST OF CORRECTING THE DEFECT IN THE PRODUCT OR, AT SUPPLIER’S OPTION, THE COST OF
REPLACING THE DEFECTIVE ITEM. IN NO EVENT WILL SUPPLIER BE LIABLE FOR ANY LOSS OF PRODUCTION, LOSS OF PROFITS,
LOSS OF USE OR FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR CONTINGENT DAMAGES, EVEN IF SUPPLIER
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. WITHOUT LIMITING THE FOREGOING, SUPPLIER SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM INSTALLATION, USE, QUALITY, PERFORMANCE OR ACCURACY OF
ANY PRODUCTS.
www.satlabgps.com
3
www.satlabgps.com
4
1. Introducon
Thank you very much for choosing Satlab SL600, state of the art, ulmate on the pole GNSS System with 6G
tracking.
Within this user guide, you will be given the physical and operaonal consideraons as well as step by step eld
operaons in detail.
SatLab SL600 is built on a LINUX based operang system which controls all hardware and communicaons for an
error free and easy to support soluon.
Just listen to SatLab SL600, its voice prompts will advise you of any issues together with a soluon.
It always remembers what it has performed before. Once you set up its operang parameters, forget about
seng them up again, just power up the receiver and it is ready to measure.
SL600 ulizes the latest in GNSS technology; 6G!
The unit is capable of tracking 6 dierent satellite constellaons, namely GPS, GLONASS, BeiDou, GALILEO, QZSS
and SBAS.
Stac, VRS RTK, UHF RTK, all surveying modes are available to meet any type of surveying applicaon.
A mulband 3G modem covers all types of data services available in the world, making sure that SatLab SL600
can connect to any NTRIP Network. Moreover, the 2 W internal UHF modem is compable to work with any
standardized radio protocol, ensuring your SatLab SL600 will work with any available base or rover staon.
Equipped with two high capacity hot-swappable Li-Ion baery packs, that together provide up to 24 hours of
uninterrupted operaon.
In addion to its 1GB of internal memory, SL600 is equipped with a Micro SD card slot for storing large les like
long stac observaons in high precision applicaons.
NOTICE:
1. SATLAB SL600 HAS DIFFERENT CONFIGURATIONS WITH DIFFERENT PART NUMBERS. FOR THE BEST
CONFIGURATION, PLEASE REFER TO YOUR LOCAL REPRESENTATIVE.
2. BEFORE THE FIRST USAGE, WE SUGGEST CHECKING THE PACKAGE IS NOT DAMAGED. OPEN THE BOX
CAREFULLY AND CHECK WHETHER INNER ITEMS MATCH UP WITH THE SUPPLIED ORDER LIST. INCASE OF ANY
MISSING ITEM OR ANY DAMAGE ON ANY ITEMS, PLEASE CONTACT YOUR LOCAL DISTRIBUTOR OR SATLAB
GEOSOLUTIONS AB IMMEDIATELY.
3. PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USING THE SYSTEM!
1. Introducon
www.satlabgps.com
6
Table of Contents
1. Introducon
2. Receiver Physical Appearance
2.1. Introducon
2.2. Transport Case
2.2.1. Items of Transport Case
2.3. Housing
2.3.1. Boom Housing
2.3.1.1. Baery
2.3.1.2. SIM Card
2.3.1.3. Memory Card
2.3.2. Control Panel
2.4. Communicaon
2.4.1. Communicaon Ports
2.4.1.1. COM1
2.4.1.2. COM2
2.4.1.3. Bluetooth
3. Operaon
3.1. Introducon
3.2. Soware Tools
3.2.1. Satlab GNSS Management Soware
3.2.2. Satlab UHF Radio Management Soware
3.3. Field Operaons
3.3.1. Network Rover
3.3.2. UHF Base/Rover
3.3.3. Stac Data Collecon
www.satlabgps.com
7
Table of Contents
4. Satlab SurvCE Guide
4.1. Creang A Job
4.2. Network Rover Sengs
4.3. UHF Base Sengs
4.4. UHF Rover Sengs
4.5. Recording Points
4.6. Oset
4.7. Auto Recording
4.8. Stake Out
4.9. Download/Upload Points
4.10. DXF-DWG Export/Import
4.11. Post Processing Raw Data Session
4.12. Using Internal GPS in SL55
5. Specicaons
5.1. Technical Specicaons
5.2. NGS Antenna Parameters
6. Trouble Shoong
www.satlabgps.com
8
2. Receiver Physical Appearance
2.1. Introducon
In the default conguraon, Satlab SL600 is available as a complete kit including Satlab SL600 receiver,
its transport case and corresponding accessories which are given in the following secon
Note: Items in the standard conguraon may dier depending on the applicaon or geographical
condions.
Figure2.1 Transport Case
2.2. Transport Case
Satlab SL600 is stored in a protecve transport case which is durable against harsh environmental
condions.
It has a specially cut rubber insert to accommodate Satlab SL600 and its accessories.
www.satlabgps.com
9
2. Receiver Physical Appearance
SL600
SL55
Pole Holder
Tape Measure
Baery
Baery
Y Cable
Charger
Charger
Extension Pole*
UHF Antenna *
GNSS Receiver
Field Controller
for SL600
for SL55
for SL600
for SL55
Picture
1 pc
1 pc
1 pc
1 pc
2 pcs
2 pcs
1 pc
1 pc
1 pc
1 pc
1 pc
Table. 2.1
Item Descripon Quanty
2.2.1. Items of Transport Case
Satlab SL600 standard kit consists of following items inside the transport case
* Available only with UHF conguraon (P/N 0201010269)
www.satlabgps.com
10
2.3. Housing
Satlab SL600 housing is made of General Electric Xenoy 5220U polymer resin to withstand severe and
harsh environment condions.
Housing consists of two main parts, namely top part, covering the GNSS antenna and boom part,
accomodang electronics, ports and compartments.
A rubber band around top and boom parts protects housing and inner electronics from impacts.
Following gures show how housing looks from front and back side.
Figure 2.1 Satlab SL600 housing front view
Figure 2.2 Satlab SL600 housing back view
2. Receiver Physical Appearance
Otros manuales para SL600
2
Tabla de contenidos
Otros manuales de Receptor de SatLab
