Sanyo VPC-CG6BL Manual de usuario

SANYO Software Pack 7.8

For Digital Movie Camera

INSTRUCTION MANUAL

Please read these instructions carefully before using. Be sure to keep this manual

for later reference.

iEnglish

ATTENTION

Regarding permission to use the CD-ROM

hThis CD-ROM may not be reproduced without permission.

hWhen installing the software in this CD-ROM, permission is granted for

its use only if the user agrees to the terms and conditions that are

displayed at the start of installation.

hRegarding products by other manufacturers that are specified on this

CD-ROM, and for service, please inquire of the respective

manufacturer.

iIt is strictly forbidden to copy this manual, wholly or in part, without prior

written permission.

iThe contents of this manual are subject to change without prior notice.

iSanyo Electric shall not be held responsible for any problems resulting

from the use of this product.

iSanyo Electric declines all responsibility for damages due to improper use

of this product, failure to adhere to the instructions given in this manual, or

repairs or changes done by those other than a technician authorized by the

manufacturer.

iSanyo Electric shall not be held responsible for any damage caused by

optional devices or consumable items used with this product other than

those supplied with this product or those specified by Sanyo Electric.

iSanyo Electric shall not be held responsible for any losses or loss of

revenue resulting from the loss of data caused by the malfunction, or the

repairing of a malfunction, of this product.

1English

COPYRIGHTS

This manual and the software are copyrighted materials from Sanyo Electric

Co., Ltd.

PowerPC is a registered trademark of International Business Machines Corp.

(USA)

Macintosh and QuickTime are registered trademarks of Apple Computer, Inc.

in the USA and other countries.

Microsoft and Windows are registered trademarks of Microsoft Corporation in

the USA and other countries.

DirectX is a registered trademark of Microsoft Corporation in the USA and

other countries.

Intel and Pentium are registered trademarks of Intel Corporation (USA).

All other brand or product names mentioned in this manual are trademarks or

registered trademarks of their respective companies.

English 2

CONTENTS

CONTENTS.............................................................................................2

INTRODUCTION ....................................................................................3

About this manual ............................................................................3

The software ....................................................................................4

CD-ROM directory map ...................................................................4

OPERATING ENVIRONMENT ...............................................................5

Windows ..........................................................................................5

Macintosh ........................................................................................5

BEFORE MOUNTING YOUR CAMERA .................................................6

Cautions when using the camera as an external drive ....................6

Operating environment ....................................................................6

Data file formats ..............................................................................6

Configuration of directories in the card ............................................7

Setting to the card reader mode ......................................................8

Concerning recharging while connected to the USB terminal .........9

For Windows XP users ....................................................................9

For Windows 2000 users ...............................................................10

For Mac OS 9.xx users ..................................................................11

For Mac OS X users ......................................................................11

INSTALLING THE APPLICATION SOFTWARE ..................................12

Windows ........................................................................................13

Macintosh ......................................................................................14

HOW TO USE Photo Explorer ..............................................................15

Set up the environment .................................................................15

Copying image data to a computer ...............................................17

USING AS A PC CAMERA ...................................................................19

Before connecting your camera to a computer .............................19

Connect your camera to a computer .............................................20

ABOUT MotionDirector .........................................................................21

Importing .......................................................................................21

Output format and playback ..........................................................21

ABOUT MovieFactory ...........................................................................22

Main features .................................................................................22

Additional features .........................................................................23

3English

INTRODUCTION

This manual describes how to install and operate the SANYO Software Pack.

Please read this manual carefully, in order to use the images and audio

recordings captured with your camera in a wide range of applications.

About this manual

The explanations in this manual conform to the following conventions.

iThe examples given in this manual are generally based on a Windows

environment. For Macintosh users, while the menu names and screen

indications may be different, this is no impediment to understanding the

operation. In those places where the operations for Macintosh users and

Windows users differ, specific explanations are provided.

iIn this manual, the SD Memory Card is referred to as “card”.

hThis manual is designed for users with the following computer skills:

hKnowledge of basic computer operations

hKnowledge of basic mouse operations

hKnowledge of how to open, close, move, minimize and maximize

windows

hKnowledge of how to move from one folder to another folder

Detailed information about the operations listed above can be found in the

printed or online manuals accompanying the computer or operating system

software.

Symbols used in this manual

HINT Extra information about software or cautionary notes.

CAUTION Points requiring special attention.

(page xx) Refer to the page indicated for detailed information.

English 4

The software

The following software applications are in the SANYO Software Pack.

Please see page 12 for a summary of each software program.

iQuickTime 7.1

In this manual, referred to as QuickTime.

iiTunes 6

In this manual, referred to as iTunes.

iUlead Photo Explorer 8.5 SE Basic (Windows)/Photo Explorer for Mac 2.0

(Macintosh)

In this manual, referred to as Photo Explorer.

iMotionDirector SE 1.1 (Windows)

In this manual, referred to as MotionDirector.

iUlead DVD MovieFactory 5.0 SE (Windows)

In this manual, referred to as MovieFactory

* Photo Explorer and MovieFactory both support the MPEG-4 format.

Installing these application software will allow you to view MPEG-4 files.

CD-ROM directory map

Below is a directory map of the SANYO Software Pack contents.

* The drive name (D:) may be different on your computer.

Sanyo Disc1 (D:)*

iTunes

Sanyo Disc2 (D:)*

hDisc1 hDisc2

Photo Explorer

DVD MovieFactory

MotionDirector

Sanyo Disc

hDisc1

Photo Explore

iTunes

5English

OPERATING ENVIRONMENT

Windows

* Including iTunes.

Macintosh

Software CPU Memory Hard drive OS

iTunes

Pentium III

500 MHz

or faster

256 MB or more —

Windows

2000/XP

QuickTime* Pentium

or faster 128 MB or more 11 MB

or more

Photo

Explorer

Pentium III

800 MHz

or faster

256 MB or more

950 MB

or more

(5 GB or more

recom-

mended)

Motion

Director

Pentium III

1GHz

or faster

256 MB or more

(512 MB

recommended)

Movie

Factory

Pentium III

800 MHz

or faster

256 MB or more

(512 MB or more

recommended)

Other Direct X9.0 or later

Software CPU Memory Hard

drive OS

iTunes 500 MHz

G3 or later

256 MB

or more —Mac OS X 10.2.8

or later

Photo Explorer Power PC

or later

64 MB

or more

20 MB

or more

Mac OS 9.0 or

later (CarbonLib

1.4 or more);

Mac OS X 10.1

or later

English 6

BEFORE MOUNTING YOUR CAMERA

The following is an explanation of the format of data recorded by your

camera, as well as the configuration of directories in the card.

Cautions when using the camera as an external

drive

iDo not alter files or folders in your camera in any way. Doing so may result

in your camera not recognizing that data.

If you want to edit files, first copy them to your computer’s hard drive.

iCards formatted on your computer cannot be used by your camera. Format

all cards to be used by your camera with your camera.

Operating environment

Windows

A computer with a standard-equipped USB port, and preinstalled with

Windows 2000, XP or later is required. Correct operation cannot be

guaranteed for models with upgraded Windows systems.

Macintosh

A model with a standard-equipped USB port, and preinstalled with Mac OS

9.0, 9.1, 9.2, Mac OS X 10.1 or later is required.

Data file formats

The format of the files saved on the card and the method in which the file

names are determined are explained below.

* Consecutive numbers assigned in the order the data was saved.

Type of data Data format File name structure

Still image

data JPEG

File name begins with SANY.

Extension is “.jpg”.

SANY****.jpg

Video clip

data MPEG-4

File name begins with SANY.

Extension is “.mp4”.

SANY****.mp4*

Audio

recording

data

MPEG-4 Audio

(AAC compression)

File name begins with SUND.

Extension is “.m4a”.

SUND****.m4a*

7English

Configuration of directories in the card

* Up to 9,999 files can be stored in folder 100SANYO. If more files are made,

a folder named 101SANYO is created, and they will be stored in there. New

folders will then be named in sequence, i.e., 102SANYO, 103SANYO, etc.

HINT

About the volume name

The volume name will be [XACTI_CG6] for a card that was formatted with the

camera, [CG6_INT] for the camera’s internal memory, and [Removable disc]

for a card that was formatted with a computer.

About video clip data recorded with this camera

iYou can use Apple’s QuickTime 6.3 or later version to play back video clips

on a computer. Playback may also be possible using other software that

supports the ISO standard MPEG-4 (AAC audio). QuickTime 7.1 for

Windows is supplied with the included CD-ROM (SANYO Software Pack).

About audio data recorded with this camera

iIf you change the extension (.m4a) of audio data files to “.mp4”, playback

may be possible using software that supports the ISO standard MPEG-4

(AAC audio).

About file names when the card is replaced...

iIf the file number reset function is set to off, even when the card is

replaced, consecutive numbering of folder numbers and file names

continues from the previously installed card (see page 139 in the camera’s

instruction manual).

CAUTION

If you intend to view the images on the camera, do not use a computer

to rewrite the card data.

iIf the folders, file names, or their configuration is modified using a personal

computer, it will be impossible to play back the data using the camera, and

the camera may not operate properly.

ROOT DCIM

MISC

100SANYO

101SANYO

SANY0001.jpg

SANY0002.jpg

SANY9999.jpg

SANY0002.jpg

SANY0003.mp4

SUND0004.m4a

SANY0005.jpg

102SANYO SANY0001.jpg

SANY0002.jpg

Folder number Image

number

Image or

audio

recording

number

(Location

of DPOF

files)

English 8

Setting to the card reader mode

Start your computer, and use the supplied USB interface cable to

connect your camera to the computer.

Connect the camera’s USB terminal to the computer’s USB connector.

Turn on the camera (see page 26 in the camera’s instruction manual).

The USB Connection Screen appears on the camera’s monitor.

Select “CARD READER”, and press the SET button.

The camera changes to the card reader mode.

When connecting the “mobile viewer”, select “MOBILE VIEWER” and press

the SET button. During this time, battery recharging is disabled.

CAUTION

Insert and pull out the cable carefully.

When connecting the cables, make sure that the cable plugs are correctly oriented

and that they match the shapes of the terminal sockets on the devices. Push the

plugs in straight when connecting them. If undue force is used to connect a cable, it

may permanently damage the connector pins in the terminal socket.

Do not use excessive force when connecting and disconnecting cables.

Please connect the dedicated USB interface cable to your computer’s USB

connector. Do not connect it to the USB port on your monitor or keyboard, or to the

USB hub. Be especially careful when installing the driver software. In some

instances, it may not be possible to correctly install the driver software.

USB CONNECTION

CANCEL

PC CAMERA

PictBridge

MOBILE VIEWER

CARD READER

To USB connector

on the computer

Supplied dedicated

USB interface cable

To the USB terminal

on the camera

Tabla de contenidos

Otros manuales de Software de Sanyo

Sanyo

Sanyo Xacti VPC-WH1 Manual de usuario

Sanyo

Sanyo 9.1 Manual de usuario

Sanyo

Sanyo VPC HD1 - Xacti Camcorder - 720p Manual de usuario

Sanyo

Sanyo VPC HD2 - Xacti Camcorder - 720p Manual de usuario

Sanyo

Sanyo PLC-XU305A - 3000 Manual de usuario

Sanyo

Sanyo VPC-AZ3 Manual de usuario

Sanyo

Sanyo VPC E1 - Xacti Camcorder - 6.0 MP Manual de usuario

Sanyo

Sanyo VPC HD700 - Xacti Camcorder - 720p Manual de usuario

Sanyo

Sanyo VPC CA6 - Xacti Camcorder - 6.0 MP Manual de usuario

Sanyo

Sanyo PLC-XU300 Manual de usuario

Sanyo

Sanyo VA-SW8000 Instrucciones de montaje

Sanyo

Sanyo VPC HD700 - Xacti Camcorder - 720p Manual de usuario

Sanyo

Sanyo PJ MASTER POA-PJNM01 Manual de usuario

Sanyo

Sanyo PLC XU115 - XGA LCD Projector Manual de usuario

Sanyo

Sanyo VPC HD1 - Xacti Camcorder - 720p Manual de usuario

Sanyo

Sanyo VPC CA9 - Xacti Camcorder - 720p Manual de usuario

Sanyo

Sanyo VPC HD2 - Xacti Camcorder - 720p Manual de usuario

Sanyo

Sanyo VA-SW8000LITE Manual de usuario

Sanyo

Sanyo PLC-XC56 - 3100 Manual de usuario

Sanyo

Sanyo PLC-XL51 - 2700 Lumens Manual de usuario

Sanyo

Sanyo VPC CA6 - Xacti Camcorder - 6.0 MP Manual de usuario

Sanyo

Sanyo VPC HD1 - Xacti Camcorder - 720p Manual de usuario

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

HP ProLiant BL420c Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario