Sanyo VCC-4312P Manual de usuario
INSTRUCTION MANUAL
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
VCC-4312P
COLOUR CCD camera
CCD-Farbkamera
Caméra CCD COULEUR
CCD
About this manual
Before installing and using the camera, please read this
manual carefully. Be sure to keep it handy for later reference.
Über diese Bedienungsanleitung
Lesen Sie bitte vor der Montage und dem Inbetriebnehmen der
Kamera zuerst diese Bedienungsanleitung sorgfältig durch und
bewahren Sie sie zum späteren Nachschlagen auf.
A propos de ce manuel
Avant d’installer et d’utiliser la caméra, veuillez lire ce
manuel attentivement. Gardez-le à portée de main
pour toute référence ultérieure.
L53S2/XE GB 1998, 12, 25
Depending on the conditions of use, installation and environment,
please be sure to make the appropriate settings and adjustments. If
you need help with installation and/or settings, please consult your
dealer.
CONTENTS
PRECAUTIONS........................................................................................ 2
PARTS NAMES ....................................................................................... 3
MOUNTING THE LENS........................................................................... 7
CONNECTIONS....................................................................................... 9
SETTINGS................................................................................................10
TROUBLESHOOTING ............................................................................. 13
SPECIFICATIONS....................................................................................14
ACCESSORIES
1C mount adaptor ( mm)....................1 pc.
The C mount adaptor must be used to be able to install a C mount
lens on the camera.
2Lens iris plug (4-pin) ............................1 pc.
3AC adaptor .........................................1 pc.
123
FEATURES
•The optical filter is switched automatically to colour image or black
and white image according to the subject brightness.
•Built-in interline transfer method 1/3" CCD, approx. 320,000
picture elements
•Low smear, anti-blooming, low lag, no burning and no geometric
distortion using the CCD solid state image device.
•100% solid state components giving excellent immunity to shock
and vibration
•Not subject to interference from magnetic or electrostatic fields
•High sensitivity, minimum required illumination is 0.0 lux (F1.2)
•Horizontal resolution, more than 330 TV lines
•Power supply: 12 – 1 V DC operation
L 3S2/XE GB 1998, 12, 2
English 1
RECAUTIONS
In case of problem
Do not use the camera if smoke or a strange odour comes from the
unit, or if it seems not to function correctly. Disconnect the power
cord immediately, and consult your dealer (or a Sanyo Authorized
Service Centre).
Do not open or modify
Do not open the cabinet, as it may be dangerous and cause damage
to the unit. For internal settings and repairs, consult your dealer (or a
Sanyo Authorized Service Centre).
Do not put objects inside the unit
Make sure that no metal objects or flammable substance get inside
the camera. If used with a foreign object inside, it could cause a fire,
short-circuits or damages.
If water or a liquid gets inside the camera, disconnect the power cord
immediately, and consult your dealer (or a Sanyo Authorized Service
Centre). Be careful to protect the camera from rain, sea water, etc.
Be careful when handling the unit
To prevent damages, do not drop the camera or subject it to strong
shock or vibration.
Install away from electric or magnetic fields
If installed close to a TV, radio transmitter, magnet, electric motor,
transformer, audio speakers the magnetic field they generate will
distort the image.
rotect from humidity and dust
To prevent damages to the camera, do not install it where there is
greasy smoke or steam, where the dampness may get too high, or
where there is a lot of dust.
rotect from high temperatures
Do not install close to stoves, or other heat generating devices, such
as spotlights, etc., or where it could be subject to direct sunlight, as
that could cause deformation, discoloration or other damages.
Be careful when installing close to the ceiling, in a kitchen or boiler
room, as the temperature may raise to high levels.
Install where the temperature range will stay between –10˚C and
0˚C.
(no condensation)
Cleaning
•Dirt can be removed from the cabinet by wiping it with a soft
cloth. To remove stains, wipe with a soft cloth moistened with a
soft detergent solution and wrung dry, then wipe dry with dry soft
cloth.
•Do not use benzine, thinner or other chemical product on the
cabinet, as that may cause deformation and paint peeling. Before
using a chemical cloth, make sure to read all accompanying
instructions. Make sure that no plastic or rubber material comes in
contact with the cabinet for a long period of time, as that may
cause damage or paint peeling.
ENGLISH
L 3S2/XE GB 1998, 12, 2
2 English
ARTS NAMES
1Lens iris output connector (4 pin)
This 4-pin connector is used to send the DC control signal and power supply to an auto-iris type lens.
2Flange-back adjustment lever (See page 6)
3Flange-back lock screw
4Lens mount cap
The cap is installed to protect the lens mount section.
Remove the lens mount cap before installing a lens (sold separately).
5Camera installation bracket
The bracket can be fixed at the top or bottom of the camera. When fixing the bracket, be sure to use the
longer screws and install the shorter screws on the opposite side to seal the openings.
CAUTION:
When installing the camera support, select a location that can support the total weight of the
camera and accessories.
1232
1
5
1
4
1
2
3
4
3
2
1Shorter screws: M3 x 4
2Longer screws: M3 x 6
3Camera mounting
screw hole:
1/4"-20 UNC
L 3S2/XE GB 1998, 12, 2
English 3
ARTS NAMES
6Camera setup section (under the cover)
This unit factory settings are as indicated below. These settings are for when using a 1/3 inch CS mount DC
(without EE internal amplifier) type lens. However, if due to installation conditions or environment the settings
may need to be modified for best results (see "SETTINGS"). To access the controls, remove the cover fixing
screw, then remove the cover.
Control name osition
aColour and Black/White level switch (C-BW) L
bHigh speed electronic shutter switches (ES) All OFF: 1/50 sec
cRed and Blue colour adjustment volume (R, B) about centre
dWhite balance switch (WB) A
eElectronic iris (EI)/Backlight compensation (BLC) switch OFF
fAuto-iris lens switch (A.I. LENS) DC
gLens iris level volume (LEVEL) about centre
Notes:
•The EI/BLC switch cannot be used simultaneously.
•When using a 1/2 or 2/3 inch C mount VIDEO (with EE internal amplifier) auto-iris type lens, set the
A.I. LENS switch to the VIDEO position.
•If not using an auto-iris lens, make sure the EI/BLC switch is set to OFF.
b
c
d e f g
6
a
LEVEL
DC
VIDEO
A. I.
LENS
LH
VR301
ON
OFF
ON
WB
A
M
BLC
EI
VR302
BR
VR303
C-BW
L
H
ON
1324
L 3S2/XE GB 1998, 12, 2
4 English
ARTS NAMES
7ower indicator ( OWER)
Comes on when the power to the camera is on.
8Video output connector (VIDEO OUT: BNC type)
Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector.
9External sync composite video signal input connector (VBS IN: BNC type)
Connect to this connector the synchronizing signal output from a synchronizing signal device or the composite
signal of a video distributor.
F12 V DC input terminal (12 V DC, NC)
OWER SOURCE
Connect DC connecting cord from the AC adaptor to the 12 V DC IN terminal on the camera.
Then, plug the AC adaptor into an AC outlet.
WARNING:
•This AC adaptor is specially conceived for this camera.
Never use another type of AC adaptor with this camera, and do not use this AC adaptor to power other
types of cameras.
•Not for use with toys.
•Never try to disassemble or modify the AC adaptor.
•AC adaptor output: 1 V DC
7
9
F
8
NC + –
L 3S2/XE GB 1998, 12, 2
English 5
ARTS NAMES
Flange-back adjustment
If the pick-up surface is not correctly positioned with relation to the lens focal point, the picture will be out of
focus (in particular when using auto-iris power zoom lenses, sold separately). If that is the case, adjust the
flange-back position as described below.
1Using a + screwdriver, loosen the flange-back lock screw (M2:+).
2Set the zoom lens to the maximum telephoto position, set the focus using the focus ring on the lens.
3Set the zoom lens to the maximum wide angle position, set the focus using the flange-back adjustment
lever.
4Repeat steps 2 and 3, until the image stays in focus when changing from a telephoto shot to a wide angle
shot.
When the setting is complete, tighten the flange-back lock screw.
Note:
When flange-back lock screw is completely tighten it will protrude slightly as shown in the illustration (Fig. 1).
Do not tighten the screw further.
Fig. 1
Flange-back lock screw
2
3
1, 4
L 3S2/XE GB 1998, 12, 2
6 English
MOUNTING THE LENS
Check the lens mount
Do not use a lens if the length “L” is more than 5 mm. That may damage the
camera and prevent proper installation.
Installation of a DC type auto-iris lens (sold separately)
A 1/3 inch CS mount type lens without EE amplifier circuit that only uses a DC power source. This camera can
receive (the A.I. LENS switch to the DC type) a CS mount type lens without the need of an adaptor.
If the lens plug shape or wiring does not correspond, please install the supplied plug as indicated in the pin
layout table.
Installation of a VIDEO type auto-iris lens (sold separately)
A 1/2 or 2/3 inch C mount type lens with EE amplifier circuit that uses the video signal and a DC power source.
1Remove the lens mount cap.
2Attach the supplied C mount adaptor (A) to the auto-iris lens (B), then install the assembly on the camera.
3Connect the lens plug to the LENS connector on the side of the camera.
If the lens plug shape or wiring does not correspond to the specifications below, connect the supplied plug
as indicated.
•When using lenses from other makers, make sure that the pins connections in the plug correspond to
the ones of the camera.
Refer to the lens specifications to check the pins connections in the plug.
•If they are different than indicated, remove the original plug and connect the supplied plug according to
the diagram.
L
2 (A) (B)
3
3
1
24
L 3S2/XE GB 1998, 12, 2
English 7
MOUNTING THE LENS
4Set the A.I. LENS switch in the camera setup section to the VIDEO position.
in layout
DC type lenses VIDEO type lenses
1Brake coil (–) +12 V DC ( 0 mA max.)
2Brake coil (+) Not used
3Drive coil (+) Video output (1.0 Vp-p, high impedance)
4Drive coil (–) Ground (for video signal and DC power)
Compatible auto-iris lenses
1/3 inch Sanyo DC type lens 1/2 or 2/3 inch VIDEO type lens
VCL-CS8LY: Standard angle, f= 8 mm Standard angle, f= 9 mm
VCL-CS4LY: Wide angle, f= 4 mm Telephoto angle, f= 12 mm
VCL-CS2LY: Ultra-wide angle, f= 2.8 mm More telephoto angle, f= 16 mm
If using a VIDEO type auto-iris lens
•Set the ALC and LEVEL controls on the lens to adjust the iris. Normally the ALC volume should be turned
all the way to Av (Average).
•Depending on the type of lens used, the lens may not perform properly. In such a case, adjust the LEVEL
volume on the lens casing to correct.
DC
VIDEO
4
4
1
2
3
L 3S2/XE GB 1998, 12, 2
8 English
CONNECTIONS
Basic co ectio for mo itori g or recordi g
The peripheral devices (VCR, monitor, lens, etc.) and cables are sold separately.
1Make the video signal connection between the camera and the monitor or time lapse VCR.
2Insert the plug of this power cord into a wall outlet.
The OWER indicator (A) will light. Adjust the picture on the monitor using the Brightness and Contrast
controls.
Note:
When installing the camera, use metal brackets to fix the AC adaptor. Then attach it firmly using a metal strap.
Coaxial cable type and maximum length
•Cable type RG- 9U (3C-2V), 2 0 m maximum.
•Cable type RG-6U ( C-2V), 00 m maximum.
•Cable type RG-11U (7C-2V), 600 m maximum.
CAUTION:
•The RG- 9U type cable should not be run through electrical conduits or through the air.
•Using CCTV/Video-grade coaxial cable.
(Video signal connections)
: VIDEO IN
: VIDEO OUT
(A)
1
L 3S2/XE GB 1998, 12, 2
English 9
Otros manuales para VCC-4312P
1
Tabla de contenidos
Otros manuales de Cámara de seguridad de Sanyo
Sanyo
Sanyo VCC-4372P Manual de usuario
Sanyo
Sanyo VCC-XZ600 Manual de usuario
Sanyo
Sanyo VCC-W9875VP Guía del usuario
Sanyo
Sanyo VCC-HD2300 - Full HD 1080p Network Camera Manual de usuario
Sanyo
Sanyo VDC-HD3100 - Full HD 1080p Vandal Dome... Manual de usuario
Sanyo
Sanyo VCC-HD4600 - Full HD 1080p Day/Night Network... Manual de usuario
Sanyo
Sanyo DSR-HB8000 Manual de usuario
Sanyo
Sanyo VCC-5984 Manual de usuario
Sanyo
Sanyo VCC-N6695P Manual de usuario
Sanyo
Sanyo VCC-HD5600 - Full HD 1080p Day/Night Pan-Tilt-Zoom... Manual de usuario
Sanyo
Sanyo VCC-P9574S - 1/4" CCD Pan-Focus PTZ Dome... Manual de usuario
Sanyo
Sanyo VCC-4344 - 1/4" CCD High Performance Day/Night... Manual de usuario
Sanyo
Sanyo VCC-HD5400 Manual de usuario
Sanyo
Sanyo Vcc-4344 Manual de usuario
Sanyo
Sanyo VCC-5884E - 1/3" Color CCD DSP High-Resolution... Manual de usuario
Sanyo
Sanyo VCC-HD2300P Instrucciones de construcción
Sanyo
Sanyo VCC-3924P Manual de usuario
Sanyo
Sanyo VCC-6572P Manual de usuario
Sanyo
Sanyo VCC-HD2100 - Full HD 1080p Network Camera Manual de usuario
Sanyo
Sanyo VCC-9600 Manual de usuario
