Sanus DLL1 Manual de usuario
Scan for easy install video
san.us/23
DLL1 INSTRUCTION MANUAL
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-888-333-9952. We’re ready to help!
2
Does your TV weigh more than 130 lbs. (59.0 kg) including accessories?
No
—
Perfect!
Yes
—
This mount is NOT compatible. Visit decora.sanus.com or call 1-888-333-9952 to find a compatible mount.
130 lbs.
(59.0 kg)
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Ready to begin?
Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV
owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact
Customer Service at 1-888-333-9952.
CAUTION: Avoid potential personal injuries and property damage!
●This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone
●The wall must be capable of supporting five times the weight of the TV and mount combined
●Do not use this product for any purpose not explicitly specified by manufacturer
●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
Before getting started, let’s make sure this mount is perfect for you!
1
2
3
4
What is your
wall made
of?
Solid concrete
or concrete
block?
Drywall with
wood studs?
Perfect! Perfect!
CAUTION:
DO NOT
install into
drywall alone
Unsure?
Call Customer Service:
1-888-333-9952
(UK: 0800 056 2853)
?
Do you have
all the tools
needed?
Wood Stud Install
Optional
Tape
Measure Pencil Level Screw
driver Electric
Drill Socket
Wrench Stud
Finder Awl Wood
Drill Bit Masonry
Drill Bit Hammer
3/8 in.
(10 mm)
1/2 in.
(13 mm) 7/32 in.
(5 mm)
3
Dimensions
in.
[cm] 25.4
[64.5]
3.9
[9.9]
15.9
[40.5]
1.0
[2.5]
UP TO
26.6
[67.5]
3.4
[8.5]
OFFSET
28.1
[71.4]
17.2
[43.7]
6.5
[16.6]
4
TV Brackets
01 02
Parts and Hardware
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.
Never use damaged parts!
Parts and Hardware for STEP 1
NOTE: Not all hardware included will be used.
M6 x 12mm
M8 x 16mm
M6 x 20mm
M8 x 20mm
M6 x 35mm
M8 x 35mm
03
04 06
05 07
08
09
x4
x4 x4
x4 x4
x1x1
x4
TV Screws
10 x4
x4
M5 x 12mm M5 x 35mm
Washers
M5 M6/M8
11 12
x4 x4
Spacers
13 x4
5
Wall Plate Template Wall Plate
Lag Bolts
Washers
1514
16 x4
17 x4
Concrete Installation Kit CMK1 (NOT INCLUDED)
Parts and Hardware for STEP 2
5/16 x 2¾ in.
5/16 x 2¾ in.
.695 x .350 x .075 in.
.695 x .350 x.075 in.
.695 x .350 x.075 in.
5/16 x 2¾ in.
5/16 x 2¾ in.
Contact Customer Service at 1-888-333-9952 to have these additional pieces shipped directly to you.
Fischer UX 10 x 60 Anchor
x4 x4
x4
x1 x1
6
STEP 1 Attach Brackets to TV
FLAT BACK ROUND BACK CABLESINSET HOLES
1-1 Select TV
Screw Diameter
1-2 Select TV
Screw Length
Hand thread screws into the threaded inserts
on the back of your TV to determine which
screw diameter (M5, M6, or M8) to use.
ab
If your TV has a flat back AND you want your TV closer to
the wall, use the shorter screws (a).
Use the spacers and longer screws (b) to accommodate:
●Round/irregular back TVs
●TVs with inset mounting holes
●Extra space needed for cables
M6M5 M8
Too Short
Too Long
CAUTION:
Verify adequate thread
engagement with the screw or
screw/spacer combination.
-Too short will not hold the TV.
-Too long will damage the TV.
Correct
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection,
contact Customer Service
at 1-888-333-9952.
7
1-3 Attach TV Brackets
Ensure that your brackets are level on the back of the TV. Standard configurations are shown. For special applications, or if you are unsure
about your hardware selection, contact Customer Service.
aFlat Back
bRound Back / Extra Space
13
03 04 05 06 07
11
11
12
12
08 09 10
01
02
IMPORTANT: After
attaching the brackets,
adjust the straps so
they are level with the
bottom of the TV.
8
STEP 2A Attach Wall Plate to Wall Wood Stud Option
CAUTION: Avoid potential personal injuries and property damage!
●Drywall covering the wall must not exceed 5/8 in. (16 mm)
●Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
●Minimum horizontal space between fasteners: 16 in. (406 mm)
1. Locate your studs. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
2. Position the wall plate template 14 at your desired height and line up the holes with your stud center line. Level the template and tape in place.
2
1Min. 16 in.
(406 mm)
Max. 5/8 in.
(16 mm)
14
9
17
4
33 in.
(75 mm)
7/32 in.
(5 mm)
15
14
16 17
3. Drill pilot holes using a 7/32 in. (5 mm) diameter drill bit. Remove wall plate template 14 .
IMPORTANT: Be sure to drill into the center of the studs.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm).
4. Install wall plate assembly 15 using four lag bolts 16 and four washers 17 . Tighten the lag bolts only until they are pulled firmly against the
wall plate.
CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
10
STEP 2B Attach Wall Plate to Wall Solid Concrete or Concrete Block Option
CAUTION: Avoid potential personal injuries and property damage!
●Mount the wall plate 15 directly onto the concrete surface
●Minimum solid concrete thickness: 8 in. (203 mm)
●Minimum concrete block size: 8 x 8x 16 in. (203 x 203 x 406 mm)
●Minimum horizontal space between fasteners: 16 in. (406 mm)
1. Position the wall plate template 14 on the wall at your desired height. Level the wall plate template and mark the hole locations.
2. Drill three pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
2
1
Min.
16 in.
(406 mm)
3/8 in.
(10 mm)
3 in.
(75 mm)
Concrete Installation Kit CMK1 is not included
(see page 5) Contact Customer Service
at 1-888-333-9952 to have the additional
hardware shipped directly to you.
14 14
Tabla de contenidos
Idiomas:
Otros manuales de Soporte de TV de Sanus
Sanus
Sanus VisionMount VML10 Manual de usuario
Sanus
Sanus VML44A Manual de usuario
Sanus
Sanus VisionMount MF215 Manual de usuario
Sanus
Sanus Sanus Foundations FS45 Manual de usuario
Sanus
Sanus VMF322 Manual de usuario
Sanus
Sanus VMT5 Manual de usuario
Sanus
Sanus VMD2 Manual de usuario
Sanus
Sanus New VisionMount LF228-B1 Manual de usuario
Sanus
Sanus SLT4-B2 Manual de usuario
Sanus
Sanus SAN12 Manual de usuario
Sanus
Sanus HMF115 Manual de usuario
Sanus
Sanus VisionMount VMF308 Manual de usuario
Sanus
Sanus HLF112 Manual de usuario
Sanus
Sanus Classic MLT13 Manual de usuario
Sanus
Sanus VXT5 Manual de usuario
Sanus
Sanus Premium VLT5B1 Manual de usuario
Sanus
Sanus SECURA QXL12 Manual de usuario
Sanus
Sanus VisionMount LT25 Manual de usuario
Sanus
Sanus VXF730-B2 Manual de usuario
Sanus
Sanus CILT3 Manual de usuario
