Samsung SVD-4020 SERIES Manual de usuario
SAMSUNG CCTV CAMERA
SVD-4020SERIES
Vandal-Proof Color Dome Camera
INSTRUCTION MANUAL
About this manual
Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference.
P/No. : 6806-0460-01B
VAN 04. 9
•SAMSUNG TECHWIN CO., LTD.
Optics & Digital Imaging Division 145-3, Sangdaewon 1-Dong,
Jungwon-Gu,Sungnam,Kyungki-Do,Korea462-703
TEL:82-31-740-8137~41 FAX:82-31-740-8145
•SAMSUNG OPTO-ELECTRONICS AMERICA, INC. (SOA)
Closed Circuit Division 40 Seaview Drive, Secaucus NJ 07094,
U.S.A
TEL: (201) 902-0347 FAX:(201)902-0429
•SAMSUNG OPTO-ELECTRONICS UK LTD (SOUK)
Samsung House, 1000 Hillswood Drive Hillswood Business
ParkChertseySurreyKT16OPS
TEL:44-(0)1932-45-5308 FAX:44-(0)1932-45-5325
•
TIANJINSAMSUNGOPTO-ELECTRONICSCO.,LTD(TSOE)
7PingchangRd,NankaiDist, Tianjin, P.R China
PostCode:300190
TEL: 86-22-2761-9698 FAX: 86-22-2761-6514
SALES NETWORK
www.samsungtechwin.com
www.samsungcctv.com
Thank you for purchasing a SAMSUNG CCTV CAMERA.
Before operating the camera, confirm the camera model and
proper input power voltage. In order that you can understand
this manual thoroughly, we'll introduce our model description.
SVD-4020 Series (410,000 pixels)
• NTSC models • PAL models
SVD- 4020N SVD- 4020P
SVD-4020NW SVD-4020PW
Model Description
SVD- 4020 X X
• Signal System
N NTSC Model
P PAL Model
• Lens Type
Blank 3.8~9.5mm
W 2.5~6.0mm
Signal System
Lens Type
This installation should be made by a qualified service person and
should conform to all local codes.
The lightning flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
INFORMATION-This equipment has been tested and found to comply with limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING -Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than that specified.
Do NOT expose this appliance to rain or moisture.
Features Contents
Shock resistant design absorbs
external shocks
With a body made of die-cast aluminum
and dome made of the polycarbonate, if it
is hit by a ball, hammer the installed
surveillance camera is protected from
damage by lessening the shock impact.
IP66 Approved / Dust and Rain
Resistant
With dust and rain resistant design, the
camera can be installed outside under
building eaves or places that are exposed
to the dust and rain.
Auto Iris Vari-focal Lens Built-in
The focal length of lens is 3.8 to 9.5mm,
equivalent to 2.5x zoom.(2.5 to 6.0mm,
equivalent to 2.4x zoom) The built-in lens
allows the camera to have a Wider Dynamic
Range, therefore you can use in various
applications.
Backlight Compensation
The backlight compensation technology
allows the camera to find the best picture
conditions in any environment and
automatically gives a necessary light level
compensation, so that you can always
obtain the clear picture, the finest detail
and perfect light contrast.
High Sensitivity
DSP LSI technology provides the best picture
with min illumination of 0.8Lux at F1.3.
White Balance (ATW)
ATW function allow the camera to adjust
thewhite balanceautomatically inresponse
to light conditions.
High Resolution
The horizontal resolution of 480 TV lines
can be achieved by using a high density
CCD having 410,000 pixels, which
provides clean, noiseless and reliable
pictures.
6
Lens
Connecting To Monitor
Connecting To Power
Precautions
8
Composition
9
13
13
14
Name and Function of Each Part
13
Connection
15
Troubleshooting
16
Dimension
17
Specification
COLORDOME CAMERACOLORDOME CAMERA User’s ManualUser’s Manual
76
Precautions
Do not install the camera in
extreme temperature conditions.
Only use the camera under conditions
where temperatures are between -10˚C
and +50˚C. Be especially careful to provide
ventilation when operating under high
temperatures.
Do not install or use the camera in an
environment where the humidity is high.
Itcancause the imagequalityto be poor.
Do not install the camera under
unstable lighting conditions.
Severelightingchange or flicker cancause
the camera to work improperly.
Do not touch the front lens of
the camera.
It is one of the most important parts of
the camera. Be careful not to be stained
by fingerprint.
Do not drop the camera or
subject them to physical shocks.
It can cause malfunctions to occur.
Never keep the camera face to
strong light directly.
• If the camera is exposed to spotlight or object reflecting strong light, smear or
blooming may occur.
• Please check that the power satisfies the normal specification before connecting
the camera.
Notes
It can damage the CCD.
Composition
Name and Function of Each Part
COLORDOME CAMERA User’s Manual
9
COLORDOME CAMERA User’s Manual
8
1. SVD-4020SERIES
2. Instruction Manual
3. Quick Install Guide
5. Ø5 Tapping Screws 4EA
6. Template
4. Wrench
7. Video Output Cable for installer
Name and Function of Each Part
COLORDOME CAMERA User’s Manual
11
COLORDOME CAMERA User’s Manual
10
Pan Base : You can rotate it from -170˚ to +170˚.
Tilt Base : You can adjust up and down the camera from 20˚ to 90˚.
Pan Base Holding Screws (Color : Silver)
Tilt Base Holding Screws
Focus Handle :
Usedtoprovidefor accurate focusingofanobject within thelensfieldof view.
Zoom Handle : Used to adjustzoommagnificationbyturning.
Function Selection Switch (*refer to p11)
V. PHASE Adjustment V.R :
IfthecameraistobeusedintheLLmode withAC24V powersupply,the
verticalphasemayrequireadjustmenttosynchronizethe
verticalphaseofthecamerawithothercamerainthe
system.Makethisadjustmentwhenthevertical
phaseofthecameradoesnotmatchwithother
camerasorsystems.Forcorrectadjustment,
useamulti-channeloscilloscope.TheV.
PHASEadjustmentcanbereadjusted.
DC Level Adjustment V.R :
Usedtoadjustvideo output levelofDCdriven
auto irislens. Whenthebrightness control of the
monitor does not operate correctly, you can get the
optimum picture by controlling the DC level of camera.
Video Output Connector for Installer :
Used to connect it with external viewer as follows.
Video Output Jack
Power Input Jack
Shield Case
Dome Cover
External Viewer (not supplied)
Video Output Cable for Installer
*Function Selection Switch
•Defaultsetting issubjectto changewithout notice.
Notes
(1) BLC(Backlight Compensation) ON/OFF Switch
This switch improves an image that is darkened because of backlight. When the
lighting source is in the rear of an object, the object might be seen somewhat dark.
If you want to see the object clearly, turn this switch ON. The effective area
wherebacklightcompensationisactivateis fixedin thecenter ofthe screen.
Name and Function of Each Part
COLORDOME CAMERA User’s Manual
13
COLORDOME CAMERA User’s Manual
12
(2) White Balance Control Mode
•ATW(Auto Tracing White balance; ON): The camera automatically controls
the white balance in any environment.
•AWC(Auto White balance Control; OFF): The white balance is automatically
adjusted in a specific environment.
(3) Sharpness
Theswitchemphasizethesharpness.Turnthisswitchoffforthesoftimage.
(4) Flickerless
Flickerless function. In this function, electronic shutter is fixed in 1/100sec
(1/120sec: PAL model). FL function can compensate the flicker caused by
powerfrequency.
(5) INT/LL Switch
Used to choose INT or LL mode.
•INT(Internal) mode : The camera may be operated independently with its
internal crystal control.
•LL(Linelock) mode : It synchronizes the video signal between cameras using
thefrequencyofthe AC powersupplywithoutexternal synchronous generator.
(6) N.C
Notused
• The LL mode can be used in the areas of 60Hz / 50Hz.
• The LL mode can be used to be with AC 24V power supply.
Notes
Connection
LENS
TheDClensisbuiltinthecamera.
•If the lens or dome cover window is marked with fingerprints or other marks, the image
qualitymight bepoor.
Notes
Connecting to Monitor
Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor.
• As a connecting method varies
according to instruments, refer
to the manual supplied with the
instrument.
• Connect the cable after
power is turned off.
• Set the 75Ω/ Hi-Z selection
switch. If it is a intermediate device, switch it to Hi-z and if it is final device,
switch it to 75Ω. (Please refer to the Monitor Manual.)
CCTV Camera
CCTV Camera
Monitor
Intermediate End monitor
Connection
COLORDOME CAMERA User’s Manual
15
COLORDOME CAMERA User’s Manual
14
Connecting to Power
• Use AC 24V / 300mA or DC 12V / 500mA power source.
•For DC power as the voltage drop according to the length of the cable in the
abovetable,acamera may malfunctionifthereis an excessivelylongcablerun.
Resistance of copper wire [at 20C˚ (68˚F)]
* Voltage for camera operation: 12V DC ±10%
* Voltage drops in the above table are variable according to types of cable manufacturer.
For DC Power Type
Copper wire size (AWG)
#24(0.22mm2)#22(0.33mm2)#20(0.52mm2)#18(0.83mm2)
Resistance ( Ω/ m) 0.078 0.050 0.030 0.018
Voltage Drop (V/m) 0.028 0.018 0.011 0.006
Troubleshooting
If you have trouble operating your camera, refer to the following table. If the
guidelines do not enable you to solve the problem, contact an authorized
technician.
Problem
Nothing appears on
the screen.
The image on the
screen is dim.
The image on the
screen is dark.
The camera is not working
properly, and the surface
of the camera is hot.
The image on the
screen flickers.
LL mode isn’t able to
be selected.
Solution
•Check that the power cord and line connection
betweenthe cameraandmonitorarefixedproperly.
•Check that you have properly connected VIDEO
cabletothe cameraVIDEOoutput jack.
•Is lens stained with dirt? Clean your lens with soft,
clean cloth.
• Set the monitor to proper condition.
•If the camera is exposed to too strong light, change
the camera position.
• Adjust the lens’ focus properly.
•Adjustthecontrast feature ofthemonitor.
•If you have an intermediate device, set the 75Ω/ Hi-z
properly.(refer topage13)
•AdjustDC Level,VRLevel properly(referto page10)
•Check that you have properly connected the camera
to an appropriate power source. (refer to page 14)
• Is the camera facing to direct sunlight or fluoresent
lighting? Change the camera position.
•Check that the INT/LL Switch is on.
•Have you connected your camera to DC power
source? Connect it to AC power source.
AC 24V DC 12V
Black (Neutral) Black (-)
White (Live) White (+)
Green (Frame Ground) Green (Frame Ground)
Dimension
* Design and specifications are subject to change without notice
Item
Power Source
Power Consumption
Synchronization
Image Pick-up Device
Total Pixels
Effective Pixels
Scanning
Min. Illumination
Resolution
Video Output
Scanning Frequency
AGC
White Balance
BLC Function
Sharpness
Flickerless
Lens Type
S/N
Operating Temperature
Weight
Monitoring Pan
Angle Tilt
AC 24V, 60Hz / DC 12V AC 24V, 50Hz / DC 12V
3.5W (Max)
INT/LL Selectable
1/3” Color Interline-Transfer CCD
816(H) x 494(V) 798(H) x 584(V)
771(H) x 492(V) 753(H) x 582(V)
2:1 Interlace
0.8Lux at F1.3
480 TV Line
1Vp-p Composite 75Ωunbalanced
15.734KHz (H) / 60Hz (V) 15.625KHz (H) / 50Hz (V)
Built in
ATW / AWC Selectable
ON / OFF Selectable
High / Normal Selectable
ON / OFF Selectable (ON: 1/100sec) ON / OFF Selectable (ON: 1/120sec)
more than 48dB (weight ON)
-10˚C ~ +50˚C [14˚F ~ 122˚F] / 30% ~ 90%RH
1.4kg
-170˚ ~ +170˚
20˚ ~ 90˚
COLORDOME CAMERA User’s Manual
17
COLORDOME CAMERA User’s Manual
16
Specifications
Ø148mm
126mm
83.5mm
46mm
85mm
85mm
85mm
DC Iris Lens adjustabl)
SVD-4020N SVD-4020NW SVD-4020P SVD-4020PW
2.5Xvari-focal,f=3.8~9.5,
F=1:1.3~2.0 2.4Xvari-focal,f=2.5~6.0,
F=1:1.3~2.0 2.5Xvari-focal,f=3.8~9.5,
F=1:1.3~2.0 2.4Xvari-focal,f=2.5~6.0,
F=1:1.3~2.0
MEMO
DECLARATION OF CONFORMITY
Application of Council Directive(s) 89 / 336 / EEC
Manufacturer's Name SAMSUNG TECHWIN CO., LTD
Manufacturer's Address SAMSUNG TECHWIN CO., LTD
42, SUNGJU-DONG CHANGWON-CITY,
KYUNGNAM, KOREA, 641-120
European Representative Name
European Representative Address
Equipment Type/Environment CCTV Camera
Model Name SVD-4020P/W
Beginning Serial NO. S4100001
Year of Manufacture 2004. 1. 1
Conformance to EN 50081-1 : 1992
EMC-Directive 89/336 EEC and 92/31/EEC
EN 50130-4 : 1996
We, the undersigned, here by declare that the equipment specified above conforms
totheabove Directive(s).
Manufacturer SAMSUNGTECHWINCO., LTD
LegalRepresentativein Europe
Signature Signature
FullName YOUNGTAEKSON FullName
Position QUALITYCONTROLMANAGER Position
Place CHANGWON,KOREA Place
Date 2004.1.1 Date
Tabla de contenidos
Otros manuales de Cámara de seguridad de Samsung
Samsung
Samsung SCO-2080R Manual de usuario
Samsung
Samsung SCC-B2303 Manual de usuario
Samsung
Samsung SCC-C6413P Manual de usuario
Samsung
Samsung SCD-2020R Series Manual de usuario
Samsung
Samsung SCC-B2315 Manual de usuario
Samsung
Samsung SCP-2430 Manual de usuario
Samsung
Samsung iPOLiS SNP-3120 Manual de usuario
Samsung
Samsung SNV-5084 Manual de usuario
Samsung
Samsung Wisenet SDC-9443DF Manual de usuario
Samsung
Samsung SND-7080 Manual de usuario
Samsung
Samsung SCC-C6437N Manual de usuario
Samsung
Samsung SNB-6011 Manual de usuario
Samsung
Samsung SUD-3080F Manual de usuario
Samsung
Samsung SCC-C6433(P) Manual de usuario
Samsung
Samsung SCC-4233(P) Manual de usuario
Samsung
Samsung SNZ-5200 Manual de usuario
Samsung
Samsung SHC-373 Manual de usuario
Samsung
Samsung Beyond SCB-5003 Manual de usuario
Samsung
Samsung SID-452 Manual de usuario
Samsung
Samsung SNO-7080R Manual de usuario
