Samsung SCC-B2091P Manual de usuario
SCC-B2391(P)
SCC-B2091P
SCC-B2300
User’s Manual
DIGITAL COLOR CAMERA
E
D
F
Sp
I
Pl
R
E
Important Safety Instructions
CAUTI N: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE REAR
COVER. NO USER
SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED
SERVICE PERSONNEL.
To prevent damage which may result in fire or electric shock hazard,
do not expose this appliance to rain or moisture.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions.
1) This device may not cause harmful interference, and
2) This device must accept any interference that may cause undesired
operation.
CAUTION:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
This symbo indicates
high vo tage is present
inside. It is dangerous to
make any kind of contact
with any inside part of this
product.
This symbo a erts you
that important iterature
concerning operation and
maintenance has been
inc uded with this product.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
2
3
E
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, or other apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being from being walked on or
pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a used,
caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-
over.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or been dropped.
4
E
Chapter 1 Introduction ........................................................ 5
Chapter 2 Specia Features ............................................. 6
Chapter 3 Insta ation ........................................................... 7
Checking the contents of the package .............. 7
Precautions in Insta ation and Use ................... 8
Connecting Auto Iris Lens Connector ................ 9
Lens Fixing
........................................................... 10
Setting Lens Se ection Switch
.................... 11
Back Focus Adjustment
................................ 11
Connecting Cabes and Checking Operation ....... 13
Chapter 4 Part Names and Functions ............................... 15
Product Specification ........................................ 20
Contents
5
E
DAYNIGHT camera is a ow brightness camera, which improves the sensitivity
by operating with a co or mode at the over of regu ar brightness and operated
with a B/W mode by cance ing the IR Cut function at the be ow of regu ar
brightness. A so, it can be used inked with the separated infrared ray emission
device. SCC-B2391(P)/B2091P has a high reso ution with the 540 TV Lines of
horizonta reso ution through the digita signa processing and OLPF.
❉
In the mechanica f uorescent ight environment, if you attach MANUAL IRIS
LENS and turn the ELC switch among FUNCTION switches on, co or may be
ro ed.
In this case, supp y AC power before you turn L/L switch among FUNCTION
switches on. (NTSC:60HZ , PAL:50HZ)
Chapter 1 Introduction
[DAYNIGHT]
It is a function of a co or camera to deete the fiter with
the IR Cut function in an i umination be ow the standard
va ue so that it has a better sensitivity.
COLOR ROLLING is the prob em that coor on the
monitor screen changes non-periodica y.
This happens when White Ba ance is not fixed,
because a mechanica fuorescent ight fickers
when it’s cyc e is the same to the cyce of the power
frequency.
6
E
High Sensitivity
It has an up-to-date 1/3" Super-HAD IT CCD for an image of high sensitivity.
Resolution
It rea izes high reso ution resu ting from fu digita image processing
supported by a state-of-art digita signa techno ogy.
Superior Back Light Adjustment Function
In case the object has a bright i umination or sun ight behind it, this camera
adjusts the image shaded by the back ight for c ear photographs.
Digital Power Supply Synchronization Method
The Fu Digita Method Line Lock is rea ized in this camera, which adjusts
the vertica camera synchronization direct y to improve contro abi ity and
re iabi ity of the camera.
Chapter 2 Special Features
7
E
This chapter describes what shou d be checked before insta ation, how to
set the insta ation environment, and what shou d be done during insta ation.
Then, it describes how to insta the camera and connect the cab e in actua
circumstances.
Camera
Ho der(Mount)
C Mount Adapter
Chapter 3 Installation
Auto Iris
Lens Connector
User's Manua
Camera
Be sure to check if the fo owing items are inc uded in the package.
Checking the contents of the package
8
E
① Do not attempt to disassemb e the camera yourse f.
➁Be cautious in hand ing the camera. Avoid striking or shaking the
camera. Be cautious to avoid damage on the camera caused by improper
storage or operation.
➂Do not expose this camera to rain or moisture. Do not operate this
camera on a wet p ace.
➃ Do not use strong or abrasive detergents when c eaning the camera
body. Use a dry c oth to c ean the camera.
⑤ Keep the camera at a coo p ace away from the direct sun ight. Leaving it
under the direct sun ight may resu t in the ma function of the unit.
Precautions in Installation and Use
9
E
Connecting Auto Iris Lens Connector
Prepare the fo owing Auto Iris Lens Connector suppied with the camera.
Connect the cab e of the contro cab e, whose covering is stripped, to the
Auto Iris Lens Connector as shown be ow.
Rb
Pin3
Pin2
Pin4
Pin1
Pin No. DC Contro Type VIDEO Contro Type
1 Damp(-) Power (+12V)
2 Damp(+) N/A
3 Drive(+) VIDEO Signa
4 Drive(-) GROUND
In case of CS lenses
Turn the CS ens c ockwise unti it is fixed as shown as fo ows.
In case of C lenses
Turn the C-mount adapter c ockwise to fix it. Then turn the C ens
c ockwise unti it is fixed as fo ows.
Lens Fixing
CS lens
C lens
10
E
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Idiomas:
Otros manuales de Cámara de seguridad de Samsung
Samsung
Samsung STC-14 Manual de usuario
Samsung
Samsung SUD-3080F Manual de usuario
Samsung
Samsung SCB-3000 Manual de usuario
Samsung
Samsung SCC-B5223 Manual de usuario
Samsung
Samsung iPolis SND-460V Manual de usuario
Samsung
Samsung SCC-B5354 Manual de usuario
Samsung
Samsung SCC-B1311(P) Manual de usuario
Samsung
Samsung SCC-B2305P Manual de usuario
Samsung
Samsung SCZ-3430N Manual de usuario
Samsung
Samsung SPD-3300 Manual de usuario
Samsung
Samsung SNB-5003 Manual de usuario
Samsung
Samsung SUD-3080 Manual de usuario
Samsung
Samsung WISENET SCV-5081RP Manual de usuario
Samsung
Samsung SND-6084R Manual de usuario
Samsung
Samsung SOC-4120AN Manual de usuario
Samsung
Samsung SNV-5080R Manual de usuario
Samsung
Samsung SNB-5004 Manual de usuario
Samsung
Samsung SID-46C Manual de usuario
Samsung
Samsung SCD-6080 Manual de usuario
Samsung
Samsung SmartDome SCC-C6403P Manual de usuario
