Samsung 46UE Manual de usuario

BN68-01537H-00

Wall Mount Setup Guide

Guide de montage mural

BN68-01537H-00.indb 1 2012-10-29 오후 5:22:58

Contents

Safety Precautions

Safety Precautions 01

Introduction

Unpacking 02

Attaching the bracket ⓐ to the monitor 03

Mounting the bracket ⓑ onto a wall 04

Different bracket types by product models

and specications 05

Arranging the monitors 07

Fine tuning 08

Detaching the monitors 10

Product specications

Product specications 12

Product drawings

Product drawings 13

BN68-01537H-00.indb 1 2012-10-29 오후 5:22:58

English 1

Safety Precautions

The information contained herein is for your safety and

to prevent any loss of property.

Please read the instructions carefully to use the prod-

uct correctly.

This mandatory sign is used to emphasize

the instructions that must be observed.

* Failure to observe the instructions herein can cause serious injury or death.

1. Be sure to contact an installation expert authorized by your dealer to perform the installation.

• Installation by a non-professional may cause personal injury.

If you are planning to relocate or replace the product

after installation, be sure to consult with an installation

expert authorized by your dealer.

After installation, do not apply excessive force or

physical pressure on the product.

2. Do not let your children play in the vicinity of the product.

• They may bump their head or body against the corner of the product and suffer personal injury.

3. Be careful not to let the back of the product hit against the wall when it is rotated or the angle is adjusted.

• You can protect the wall and product from any damage by attaching a piece of sponge to each corner of the product.

4. Do not install the product on a wall that cannot bear the weight of the product.

• The product may fall, and get damaged or cause personal injury.

5. Products installed in unusual, abnormal or extreme areas may be subject to serious performance problems due to the

surrounding environment. Be sure to consult with a Samsung service center before installing the product in such an

area.

• Areas exposed to an excessive amount of ne particles or moisture, chemicals, extreme temperatures, high humidity,

automobiles, etc.

English

BN68-01537H-00.indb 1 2012-10-29 오후 5:22:58

English 2

Unpacking

Monitor-mount bracket ⓐWall-mount bracket ⓑBracket-Bar 400 & 600

Screw ⓐ

(M8 X L30) : 8EA

Screw ⓑ

(M4 X L8) : 5EA

Wood screw

10EA

Screw holder : 4EA

(UE) Screw holder : 4EA

(UD)

Screw holder : 4EA

(ME75) Safety fastener : 2EA

BN68-01537H-00.indb 2 2012-10-29 오후 5:22:59

English 3

Attaching the bracket ⓐ to the monitor

1. Assemble the four screws ⓐ and the screw holders, and fasten them to x the bracket ⓐ to the monitor as shown in

the picture below.

(M8 X L30)

* Check to conrm that the bracket ⓐ is fastened to the monitor.

MOUNTING ME75

(ME75)

(UE)

NUse the screw holder for UD models when attaching brackets to ME65.

NUse the screw holders for ME75 and UE models when attaching brackets to ME75.

BN68-01537H-00.indb 3 2012-10-29 오후 5:22:59

English 4

Mounting the bracket ⓑ onto a wall

1. Using the two screws ⓑ, x bracket bar 400 or 600 according to the product model as shown in the image.

2. Fix the bracket ⓑ tightly against the wall using the wood screws.

* Ensure you check the wall strength, and do the reinforcing work before installation if the wall is not sufciently

strong.

* The provided screws are for wood.

* Check the wall and use proper screws according to the material of the wall, such as marble, steel plate or concrete.

NIf it is difcult to fasten the screws into the specic holes, fasten the screws in the adjacent holes.

* When drilling a hole into a wall, make sure

you use a drill bit and drill of the specied

diameter.

Otherwise, there may be safety problems.

1. Make a hole using a

3 X 50 drill.

2. Clean the inside of the

drilled hole.

3. Fasten the wood screw into

the hole.

HOW TO FASTEN A SCREW

Bracket-Bar 400

BN68-01537H-00.indb 4 2012-10-29 오후 5:23:00

English 5

Different bracket types by product models and

specications

PRODUCT MODELS AND SPECIFICATIONS

Model VESA Standard Mounting Type Monitor-Mount Bracket Bracket-Bar

46UE 400*400

LAND 400 400

PIVOT 400 400

55UE 400*400 LAND 400 400

PIVOT 600 400

46UD 600*400 LAND 400 600

PIVOT 600 400

55UD 600*400 LAND 400 600

PIVOT 400 400

65ME 400*400 LAND 400 400

PIVOT 400 400

75ME 400*400 LAND 400 400

PIVOT 400 400

CHANGING THE MONITOR-MOUNT BRACKET TYPE FROM 400 TO 600

1. Unfasten the four screws from monitor-mount

bracket type 400 as shown in the image.

2. Extend the bracket and fasten the four screws.

* Use the appropriate bracket type based on the product model and specications.

BN68-01537H-00.indb 5 2012-10-29 오후 5:23:00

English 6

INSTALLING THE VIDEO WALL

1 2

* Before you install on the Video Wall, check the wall strength considering the total weight of the monitors and

brackets you want to install.

Weight of a bracket: 3.2 kg

* If you intend to install on a Video Wall that is four layers or more, take into consideration the air conditioning

system. Consult with an expert before installation as heat from the monitors may cause problems.

NInstalling the Video Wall should be done by two persons or more.

BN68-01537H-00.indb 6 2012-10-29 오후 5:23:00

English 7

Arranging the monitors

1. Hook the monitor to which the bracket ⓐ is attached on the poles of the wall-mount bracket ⓑ.

* Be sure not to put pressure on the panel with your hands when handling the monitor.

Otherwise, you may break the panel.

2. To prevent the monitor from becoming loose, fasten the safety fasteners using the screws ⓑ.

Fasten them on both sides.

(M4 X L8)

* Since the monitor may fall during installation, ensure you fasten the safety fasteners on both sides.

* Ensure the hooks are

suspended securely on

the poles.

BN68-01537H-00.indb 7 2012-10-29 오후 5:23:01

English 8

3. Arrange the monitor on each bracket following steps 1 and 2.

* Be careful not to catch your nger during installation.

Fine tuning

NAfter arranging the monitors, if they do not seem well-

proportioned, adjust them using the ne-tuning screws

on the brackets.

NBe sure not to leave any height differences or gaps

between the monitors.

1. Correcting height difference between the front and back

of a monitor.

• At the same time, pull the knob and turn the

adjustment screw clockwise.

The monitor will move forward.

To move the monitor backward, turn the screw

counterclockwise.

The ne-tuning screw’s maximum movement range is

5 mm.

Knob

BN68-01537H-00.indb 8 2012-10-29 오후 5:23:02

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Rack y soporte de Samsung

Samsung

Samsung WMN550M Manual de usuario

Samsung

Samsung WMN750M/XC Manual de usuario

Samsung

Samsung QE32LS03TBKXRU Manual de usuario

Samsung

Samsung Q7FN Series Manual de usuario

Samsung

Samsung WMN-1000B Manual de usuario

Samsung

Samsung UN26C4000PD Manual de usuario

Samsung

Samsung SBP-300NB Manual de usuario

Samsung

Samsung LFD EX Series Manual de usuario

Samsung

Samsung Wall Mount Manual de usuario

Samsung

Samsung WMN-4270SD Manual de usuario

Samsung

Samsung WMN550M Manual de usuario

Samsung

Samsung WMN-M20E Manual de instrucciones

Samsung

Samsung WMN4277TT Manual de usuario

Samsung

Samsung WMN-M E Series Manual de usuario

Samsung

Samsung WMN8200SFXEN Manual de usuario

Samsung

Samsung SKK-DD Manual de usuario

Samsung

Samsung TWMB-1900 Manual de usuario

Samsung

Samsung WMN3000B Series Manual de usuario

Samsung

Samsung Sbr-100dcm Manual de usuario

Samsung

Samsung WMN-M13E Manual de usuario

Samsung

Samsung WMN-M21E Manual de instrucciones

Samsung

Samsung WMN-M22E Manual de usuario

Samsung

Samsung WMN-1000BD Manual de usuario

Samsung

Samsung Sbr-100dcm Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario