Salton SL-16 Manual de usuario
1
ELECTRIC SLICER
Multi-Purpose Household Slicer
MODEL SL-16
2
IMPORTANT SAFEGUARDS
1. Read all instructions.
2. DO NOT IMMERSE APPLIANCE IN WATER OR OTHER LIQUID.
3. Close supervision is necessary when any appliance is used by or near
children.
4. Unplug from outlet when not in use, when removing or putting on parts, and
before cleaning.
5. Avoid contacting moving parts. Never attempt to feed food by hand. Always
assemble Slicer completely before use; with Food Pusher, Food Platform and
guide in place.
6. DO NOT operate any appliance with a damaged cord or plug or after the
appliance has been damaged in any manner. Return appliance to Salton for
examination, repair or adjustment. See Warranty.
7. The use of accessories or attachments not recommended by Salton may
cause hazards.
8. DO NOT use outdoors.
9. DO NOT let cord hang over edge of table or counter, or touch hot surfaces.
10.The Blade is very sharp. Handle with care when cleaning.
11.DO NOT place in dishwasher.
12.This appliance is for Household Use Only. Do not use appliance for other
than its intended use.
SAVE THESE INSTRUCTIONS
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not modify the plug in any way.
3
DESCRIPTION OF PARTS
1. Thickness Knob
2. Adjustable Guide
3. Safety Switch
4. On/Off Switch
5. Locking Knob for Folding Table
6. Slot for Power Cord
7. Power Cord Storage
8. Food Platform
9. Food Pusher
10.Tray
11.Folding Table
12.Tray Storage Space
13.Stainless Steel Blade
14.Blade Cover
HOW TO USE
1. Remove Tray from underneath the Folding Table.
2. Place Slicer on a smooth, dry, flat surface. Position Slicer in front of you so
that the Thickness Knob is on your left and the Folding Table is on your right.
The 2 suction cups underneath the appliance will help secure the Slicer to the
surface.
3. Position the Food Platform onto the front edge of the Folding Table by tilting it
slightly so that the tab underneath the Food Platform hooks onto the front
edge of the table. Then lower the Platform onto the table making sure that the
glide slot fits into the groove in the top of the Table.
4. Pull the Food Platform toward you and place food on Platform. Slide Food
Pusher over edge of Platform. Cut food to smaller size if Pusher does not fit
properly.
5. Adjust thickness Knob to desired setting.
6. Unwind cord to the desired length, run it through the Exit slots and plug it into
a 120 Volt AC outlet.
7. Position the Tray at the back of the Slicer to receive sliced food.
8. Grasp Food Pusher with right hand. Hold down the Safety Switch with your
left middle finger and at the same time press the On/Off Switch with your left
thumb. Slide Food Platform toward Blade while applying gentle but steady
pressure with the Pusher. Repeat for additional slices.
9. Release the On/Off Switch to stop the Blade from turning.
NOTE: The safety system will allow the Slicer to operate only if the Safety
Switch is first depressed and held before depressing the On/Off Switch.
4
10.The Slicer can be operated continuously for 5 minutes after which it should be
turned off and allowed to cool.
11.Unplug when not in use.
12.For safety reasons, always reset the Adjustable Guide to the "O" position after
use.
HELPFUL HINTS
1. Do not slice anything containing bones, large seeds or other extremely hard
materials.
2. Remove all wrapping material from food before slicing.
3. Do not attempt to override the safety system or slice without using both the
Platform and Pusher.
4. Remove thick rind from slab of bacon before slicing.
5. Slicing sticky cheese may be made easier by first unplugging the Slicer,
removing and moistening Blade with warm water.
CARE AND MAINTENANCE
1. Unplug and clean Slicer after each use.
2. Remove Food Pusher and Platform from Slicer
3. Remove Blade Cover by pressing upwards and pulling tab out.
4. Remove the Adjustable Guide by turning the Thickness Knob clockwise until
the Guide is released.
5. To remove the folding Table turn the small Locking Knob counterclockwise
until the line is in the "O" position.
6. The Folding Table, the Guide, the Platform the Pusher and the Blade Cover
may be washed in warm soapy water. Do not wash in dishwasher.
7. Wipe the Blade with a damp cloth. Occasionally, clean the back of the Blade.
To do so, remove the Blade by burning the hub clockwise as far as it will go
and pull out. CAUTION: The Blade is very sharp. Handle with care.
8. Wipe the unit with a damp cloth. Do not immerse in water or other liquids.
Make sure all parts are dry before re-assembling and storing the Slicer.
9. Re-assemble the Slicer, omitting the Platform and the Pusher.
10.Place the Tray into the space provided under the Table, fold the Table and
store the Slicer, Pusher and Platform separately.
5
A short supply cord is provided to reduce the hazards of becoming entangled in
or tripping over a long cord. Extension cords may be used if care is exercised in
their use. If an extension cord is used, the marked electrical rating of the
detachable power-supply cord or extension cord should be at least as great as the
electrical rating of the appliance. If the appliance is of the grounded type, the
extension cord should be of the grounding-type 3-wire cord. The extension cord
should be arranged so that it will not drape over the counter top or table top,
where it can be pulled on by children or tripped over.
LIMITED WARRANTY
SALTON warrants that this appliance shall be free from defects in material and
workmanship for a period of one year from the date of purchase. During that
period these defects will be repaired or the product will be replaced at SALTON's
option without charge. This warranty covers normal domestic usage and does not
cover damage which occurs in shipment or failure which results from alteration,
accident, misuse, abuse, glass breakage, neglect, commercial use, or improper
maintenance.
TO RETURN FOR SERVICE
1. Securely package and return the product PREPAID to: SALTON CANADA,
81A Brunswick, Dollard-des-Ormeaux, Quebec, H9B 2J5
2. Be sure to enclose your name, address, postal code and description of
defect.
3. To ensure prompt "In-Warranty" service, be sure to include a proof of
purchase. We recommend you take the necessary precaution of insuring
the parcel.
4. For repairs not covered by the Warranty, you will be advised of the cost of
repair in advance, and upon receipt of your cheque or money order, the
repairs will be completed and the product returned to you.
SALTON CANADA
81A Brunswick
Dollard-des-Ormeaux
Quebec H9B 2J5
Website: www.salton.com
Tabla de contenidos
Otros manuales de Electrodoméstico de cocina de Salton
Salton
Salton STS80 Guía de instalación
Salton
Salton CM-7 Manual de usuario
Salton
Salton ELITE SDM051E Guía de instalación
Salton
Salton TO2122SS Manual de usuario
Salton
Salton SM1543 Manual de usuario
Salton
Salton SM-2 Manual de usuario
Salton
Salton SM-1069 Manual de usuario
Salton
Salton SP05 Guía de instalación
Salton
Salton multipot HC1351 Manual de usuario
Salton
Salton WC-2050 Manual de usuario
Salton
Salton CP1428R Manual de usuario
Salton
Salton SSM01 Guía de instalación
Salton
Salton CP1247 Manual de usuario
Salton
Salton GM1707 Manual de usuario
Salton
Salton DH1273 Manual de usuario
Salton
Salton DH-1171 Manual de usuario
Salton
Salton Cinema Popper CP1750 Manual de usuario
Salton
Salton SWOK30 Guía de instalación
Salton
Salton CP1716 Manual de usuario
Salton
Salton JE-1187 Manual de usuario
