Russell Hobbs NutriVac RHVB15 Guía de instalación

INSTRUCTIONS AND WARRANTY

MODEL NO. RHVB15

RUSSELL HOBBS NUTRIVAC

Congratulations on purchasing our Russell Hobbs NutriVac. Each unit is manufactured to

ensure safety and reliability. Before using this appliance for the first time, please read the

instruction manual carefully and keep it for future reference.

FEATURES OF THE RUSSELL HOBBS NUTRIVAC

•Significant improvement in preserving freshness

•Advanced Anti-Oxidisation technology

•Prevents unwanted bacteria

•Ideal for preparing and storing

•Seals in the goodness

•Healthy and nutritious blends

•The NutriVac includes the following accessories:

2 x Blade sets

400ml BPA free travel bottle

570ml BPA free travel bottle

570ml Blending BPA free bottle

BPA free storage container

Grinding mill

500W blender base

2 x Lids with carry hooks

1x vacuum lid

Wine stopper

USB operated vacuum head

•2 year warranty

* Please note that a USB adaptor is not included, however the vacuum head can be used in

any compatible USB adaptor or laptop.

NOTE: USE EXTREME CARE WHEN HANDLING THE BLADES. DO NOT TOUCH THE

BLADES WITH YOUR FINGERS. THE BLADES ARE SHARP AND CAN CAUSE INJURY.

IMPORTANT SAFEGUARDS

When using your Russell Hobbs NutriVac, basic safety precautions should always be

followed including the following:

1. Please read the instructions carefully before using the appliance.

2. Always ensure that the voltage on the rating label corresponds to the mains voltage

in your home.

3. Incorrect operation and improper use can damage the appliance and cause injury to

the user.

4. The appliance is intended for household use only. Commercial use invalidates the

warranty and the supplier cannot be held responsible for injury or damage caused

when using the appliance for any other purpose than that intended.

5. Always disconnect the appliance from the power supply if it is left unattended and

before assembling, disassembling or cleaning.

6. Avoid any contact with moving parts. Never touch the rotating tools while still in

motion - always wait for them to come to a complete stop.

7. Do not use the vacuum head during operation when the check valve is in water.

8. Close supervision is required when any appliance is used near or by children.

9. Check the power cord and plug regularly for any damage. If the cord or the plug is

damaged, it must be replaced by the manufacturer or a qualified person in order to

avoid an electrical hazard.

10. Do not use the appliance if it has been dropped or damaged in any way. In case of

damage, take the unit in for examination and/or repair by an authorized service

agent.

11. To reduce the risk of electric shock, do not immerse or expose the motor assembly,

plug or the power cord to water or any other liquid. Do not use it with wet hands.

12. Never immerse the unit in water or any other liquid for cleaning purposes.

13. Remove the plug from the socket by gripping the plug. Do not pull on the cord to

disconnect the appliance from the mains. Always unplug the unit when not in use,

before cleaning or when adding or removing parts.

14. Insert only original parts. The use of accessory attachments that are not

recommended or supplied by the manufacturer may result in injuries, fire or electric

shock.

15. A short cord is provided to reduce the hazards resulting from becoming entangled in

or tripping over a longer cord.

16. Do not let the cord hang over the edge of a table or counter. Ensure that the cord is

not in a position where it can be pulled on inadvertently.

17. Do not allow the cord to touch hot surfaces and do not place on or near a hot gas or

electric burner or in a heated oven.

18. Do not use the appliance on a gas or electric cooking top or over or near an open

flame.

19. Keep the appliance and cord away from direct radiant heat from the sun, damp

areas, sharp edges and other dangers.

20. Do not put the motor unit in water or any other liquid; do not use it in a bathroom or near

any source of water.

21. When handling the blade attachment, always hold it by the shaft.

22. Do not attempt to sharpen the blades.

23. Do not use the appliance if blade attachment is bent or damaged.

24. Use of an extension cord with this appliance is not recommended. However, if it is

necessary to use an extension cord, ensure that the cord is suited to the power

consumption of the appliance to avoid overheating of the extension cord, appliance

or plug point. Do not place the extension cord in a position where it can be pulled on

by children or animals or tripped over.

25. This appliance is not suitable for outdoor use. Do not use this appliance for anything

other than its intended use.

26. DO NOT carry the appliance by the power cord.

27. Do not leave this appliance unattended during use. Always unplug the unit when not

in use or before cleaning.

28. Always operate the appliance on a smooth, even, stable surface. Do not place the

unit on a hot surface.

29. Do not operate this appliance by means of an external timer or remote-control

system.

30. Do not put any other object (spoon, spatula, etc.) into the bottle while the blender

is plugged in.

31. Switch off the appliance and disconnect from the power supply before

changing accessories.

32. Never use this appliance to blend anything other than foods.

33. Do not use during cooking processes or with boiling liquids.

34. Do not operate the appliance with no ingredients and do not remove the lid when the

blades have not come to a complete stop.

35. The blades are very sharp. Take care when handling the sharp cutting blades,

emptying the bottle and during cleaning.

36. Only use the accessories supplied with the appliance.

37. Do not operate the vacuum head for over 30 minutes, please use DC5V adapters.

38. The blender is equipped with a powerful motor and therefore processes very

quickly. Due to its efficiency, there is no need to run the motor for more than

one minute per session.

39. Don’t operate vacuum head below minus ten degrees.

40. Do not run the blender empty, as it may overheat.

41. Always turn the blender power off at the power outlet before you remove the plug.

42. The manufacturer does not accept responsibility for any damage or injury caused by

improper or incorrect use, or for repairs carried out by unauthorized personnel.

43. In case of technical problems, switch off the blender and do not attempt to repair it

yourself. Return the appliance to an authorized service facility for examination,

adjustment or repair. Always insist on the use of original spare parts. Failure to

comply with the above-mentioned pre-cautions and instructions, could affect the safe

operation of this machine.

44. This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by a

person responsible for their safety.

45.Store the blender away from direct sunlight and fluorescent light where possible.

46. Children should be supervised to ensure that they do not play with the appliance.

47. 570ml Blending BPA free bottle with lid, 570ml BPA free travel bottle with lid, 400ml

BPA free travel bottle with lid, grinder mill bottle and storage container lid are

dishwasher safe.

48. BPA free storage container and wine stopper are not dishwasher safe.

49. Do not use the blender for any purpose other than those described in these

instructions.

50. Do not use outdoors.

CAUTION: This appliance is not for professional use. It has a powerful motor which yields

highly efficient results. There should be no need to run the motor for longer than the advisory

cycle times mentioned above.

PARTS DIAGRAM

1.Vacuum head

2.Power button

3.Front cover

4.Check valve

5.Upper twistable lid

6.Lower fixed lid

7.570ml Blending BPA free bottle

8.Nutrivac blades

9.Nutrivac blade cover

10.USB power cord

11.Rear cover

12.Base cover

13.Carry hook

OPERATING INSTRUCTIONS

Blending function

1. Ensure the NutriVac Blade cover is tightened to the 570ml Blending BPA free bottle.

2. Place the base on a clean, dry, level surface such as a counter or table top.

3. Twist open the vacuum lid, add your desired ingredients in the bottle with Nutrivac

blade cover (and close the cover ensuring the filled circle on the upper cover is in

line with the triangle on the lower end of the cover.

4. Place the bottle into the base by twisting it in a clockwise direction to ensure it has

been locked in.

5. Connect the cord to the power source and press the power button to begin blending

process.

Note: this blender is onlyfor liquids and soft fruit. Always ensure to first cut thefruit into

small pieces before placing in the bottle.

570ml Blending BPA free bottle

Vacuum function with blender

There are two options for using the vacuum function with the blender, the first option

is to vacuum the ingredients before the blending process and the second option is to

vacuum the ingredients after the blending process.

Option 1: Using vacuum function before blending

This option is more useful for when ingredients will be consumed immediately and is

the more suggested practice.

Please note: Blending this way works best when there is liquid present.

1. Ensure the NutriVac blade cover is tightened to the 570ml Blending BPA

free bottle.

2. Place the base on a clean, dry, level surface such as a counter or table top.

3. Twist open the vacuum lid add your desired ingredients in the bottle with

blade set and close the vacuum lid tightly to the bottle.

NOTE: When using this option, the vacuum function removes air from the

container which might result in the ingredients not being blended to desired

Vacuum head

570ml BPA free

travel bottle

Vacuum lid

consistency as there is no room for movement.To overcome this rather use

Option 2 below or add water to ensure the water just covers the ingredients

or there is liquid present.

4. Turn only the top half of the cover so that the valve is exposed

5. Plug the vacuum head into a USB adaptor and place it over the valve on

the bottle vacuum lid. Press the power button on the vacuum head and

leave until it stops. The vacuum cycle will only last for 60 seconds then it

will automatically switch off

NOTE: The vacuum head needs to be placed over the valve correctly or

there will be no suction and the vacuum won’t work.

6. Quickly close the top cover of the vacuum lid by turning it anti-clockwise

7. Place the bottle into the base bytwisting it in a clockwise direction to ensure

it has been locked in.

8. Connect the cord to the power source and press the power button to begin

blending process.

Option 2: Using vacuum function after blending

This option is more useful for when ingredients will not be consumed immediately.

1. Once you’ve completed the blending process as described on page 7, you

can either choose to pour the ingredients in the 400ml bottle or carry on

using the 570ml Blending BPA free bottle for the vacuum process.

2. Before placing the vacuum head, ensure the vacuum lid cover is tightly

secured.

3. Twist the vacuum bottle lid in a clockwise direction until the circle symbol is

linked with the triangle symbol.

4. Connect the USB port to a power source, place the vacuum head on the

valve on the vacuum bottle lid opening and press the power button to begin

the vacuum process.

5. Vacuum cycle will only last for 60 seconds then it will automatically switch

off.

6. Remove the vacuum head and immediately close the opening by twisting

the upper cover in an anti-clockwise direction until securely locked.

7. Remove the USB port from the power source.

8. When you’re ready to consume the ingredients, twist the upper lid in a

clockwise direction.

Please note: After the ingredients have been vacuum blended, they can either be

consumed in the 570ml Blending BPA free bottle or transferred into the 400ml BPA

free travel bottle or 570ml BPA free travel bottle. Exposing the blended ingredients to

air after it has been vacuum blended will not affect the results as the benefits of

vacuuming take place at the time of blending process.

Vacuum function with container

1. Place the food/vegetables/fruits in the container, place the sealing ring on and close

the container.

2. Ensure the container is closed properly and that there are no openings to avoid air

from escaping.

3. Connect the USB port to a power source, place the vacuum head in the air suction

valve then press the power button to begin the vacuum process.

4. The vacuum cycle will only last for 60 seconds then it will automatically switch off.

5. Once cycle is complete, remove the USB port from the power source.

6. When you want to remove the food from the container, squeeze the check valve and

let it deform and pull lightly so that any pressure from the vacuum container can be

exhausted, then open the vacuum container lid.

Vacuum head

Vacuum container lid

Check valve

Air suction valve

Sealing ring

Vacuum container

Tabla de contenidos

Otros manuales de Licuadora de Russell Hobbs

Russell Hobbs

Russell Hobbs 22990-56 Manual de usuario

Russell Hobbs

Russell Hobbs 14500 Manual de usuario

Russell Hobbs

Russell Hobbs Desire 18970-56 Guía de instalación

Russell Hobbs

Russell Hobbs 26051 Manual de usuario

Russell Hobbs

Russell Hobbs 24690-56 Manual de usuario

Russell Hobbs

Russell Hobbs 25290-56 Manual de usuario

Russell Hobbs

Russell Hobbs RHNB10 Guía de instalación

Russell Hobbs

Russell Hobbs RHB03 Guía de instalación

Russell Hobbs

Russell Hobbs RHSM3500 Manual de instrucciones de instalación

Russell Hobbs

Russell Hobbs 14449 Manual de usuario

Russell Hobbs

Russell Hobbs MIX & GO Manual de usuario

Russell Hobbs

Russell Hobbs 18995 Manual de usuario

Russell Hobbs

Russell Hobbs 24722-56 Manual de usuario

Russell Hobbs

Russell Hobbs 20240-56 Manual de usuario

Russell Hobbs

Russell Hobbs 21480-56 Manual de usuario

Russell Hobbs

Russell Hobbs 18990 Guía de instalación

Russell Hobbs

Russell Hobbs 22250-56 Manual de usuario

Russell Hobbs

Russell Hobbs BL3100RDR Manual de usuario

Russell Hobbs

Russell Hobbs Food 14449-56 Manual de usuario

Russell Hobbs

Russell Hobbs 24732-56 Manual de usuario

Russell Hobbs

Russell Hobbs 28241-56 Manual de usuario

Russell Hobbs

Russell Hobbs 24610 Manual de usuario

Russell Hobbs

Russell Hobbs 25960 Manual de usuario

Russell Hobbs

Russell Hobbs 23180-56 Manual de usuario

Manuales populares de Licuadora de otras marcas

ROTOR

ROTOR 1125.201 Manual de usuario

Braun

Braun Multiquick 5 Vario series Manual de usuario

ARENDO

ARENDO MIRA 305424 Manual de usuario

CHEF-BUILT

CHEF-BUILT CCB-3500 Manual de usuario

Viconte

Viconte VC-4406 Manual de usuario

Oster

Oster BLSTAB-CB0 Manual de usuario

HOFFEN

HOFFEN MC-3005 Manual de usuario

Black & Decker

Black & Decker BLC18750DM Manual de usuario

Sunbeam

Sunbeam 4182 Manual de usuario

Bialetti

Bialetti FMX35 Manual de usuario

Black & Decker

Black & Decker BL8000 Manual de usuario

Duronic

Duronic BL530 Manual de usuario

Exquisit

Exquisit MS 3002 wes Manual de usuario

Lumme

Lumme LU-KP1891A Manual de usuario

Binatone

Binatone HB-735 Manual de usuario

Moulinex

Moulinex LM936E10 Manual de usuario

Oster

Oster VERSA Manual de instalación y operación

Ninja

Ninja NN210Q Manual de usuario