RUPTELA FM-Pro3 Instrucciones de montaje

RUPTELA

GPS/ GSM Terminal

Model: FM-Pro3

MANUAL

v1.1

Content

1. INTRODUCTION

1.1. S FETY REQUIREMENTS

1.2. LEG L NOTICE

1.3. CRONYMS ND TERMS USED IN DOCUMENT

2. B SIC DESCRIPTION

2.1. P CK GE CONTENTS

2.2. DDITION L CCESSORIES

2.3. B SIC CH R CTERISTICS

2.4. TECHNIC L FE TURES

2.5. FM-PRO3 DIMENSIONS

2.6. LED ST TUSES

2.7. PINOUT, CONNECTION

2.8. SPECI L FE TURES

3. INST LL TION INSTRUCTIONS

3.1. MODULE INST LL TION

1. INTRODUCTION

1.1. S FETY REQUIREMENTS

ll the associated (additional) equipments as PC, batteries, sensors

and others, shall meet the requirements of standard EN60950-1.

Do not disassemble the Terminal. If the enclosure of Terminal is

damaged, or the insulation of wires is damaged, first of all unplug the

10 pins connector from the Terminal carefully.

ll the wireless data transferring equipments produce interference that

may affect other devices which are placed nearby.

The Terminal can be installed or dismounted only by qualified

personnel!

The Terminal must be firmly fastened in the predefined location.

Predefined location is explained in the Mounting instructions.

The programming must be performed using a 2nd safety class of PCs

(with autonomic power supply).

Be sure the Terminal is installed in the place where it cannot be

reached by water drops and humidity.

Caution

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

ny installation and/or handling during a lightning storm is prohibited.

Use cables provided with FM-Pro3 device.

Ruptela is not responsible for any harm caused by using wrong cables

for PC <-> FM-Pro3 connection.

ttention! Do not connect wrongly the wires marked (+ battery) and

(chassis) to battery poles. If poles are mixed, the device will broke.

To disconnect the device from power supply, you need to disconnect

10 pins plug and plug for internal battery.

This chapter contains information on how to operate FM-Pro3 safely. By following these

requirements and recommendations, you will avoid dangerous situations. You must read these

instructions carefully and follow them strictly before operating the device! The Terminal is

supplied from a car battery with its ratings: 12/24V 1 /500m . The allowed voltage range

for battery: 10…32V DC.

To avoid mechanical damage, it is advised to transport the Terminal FM-Pro3 in an impact-

proof package.

Before connecting the wires of 12 pins plug to the vehicle, ensure that 10 pins plug is

disconnected from the Terminal. Be sure that cross-

sectional area of mounting wires is at

least 0.75 mm

To dismount Terminal correctly from the vehicle, first of all disconnect 10 pins plug and only

then other plugs or interfaces can be disconnected.

lways connect 12 pins plug before connecting 10 pins plug.

The Terminal is intended to be installed in a restricted access location, which is inaccessible

for the operator. The Terminal FM-Pro3 is not intended to be used for boats.

1.2. LEG L NOTICE

of part or all of the contents in this document in any form without the prior written permission of

Ruptela is prohibited. Other products and company names mentioned here may be trademarks

or trade names of their respective owners.

1.3. CRONYMS:

• PC – Personal Computer.

• GPRS – General Packet Radio Service.

• GPS – Global Positioning System.

• GSM – Global System for Mobile Communications.

• SMS – Short Message Service.

• C/DC – lternating Current/Direct Current.

• Record – Data stored in FM-Pro3 memory. Data contains GPS and I/O Information.

• FMS – an optional standard interface of different truck manufacturers.

• Simplified RS232 - connection standard between different pieces of equipment. Simplified

RS232 has only Rx and Tx lines.

• LED – Light Emitting Diode.

• C N-bus – FMS standard interface.

• I/O – Inputs / Outputs.

• OBD - On-Board Diagnostics socket, it can be found on a lot of vehicles.

• K_Line, L_Line – it is pins of OBD interface.

2. B SIC DESCRIPTION

FM-Pro3 is a Terminal with GPS / GSM connectivity, which is able to determine the object’s

coordinates and transfer them via the GSM network. This Terminal is perfectly suitable for

applications where location acquirement of remote objects is needed. It is important to mention

that FM-Pro3 has additional inputs and outputs, which lets controlling and monitoring other

devices on remote objects. 1-Wire® interface (for Dallas digital thermometer or I-Button reader)

and C N-bus interface integrated (for trucks FMS interface data acquisition). It also has 2

simplified RS232 ports for connecting additional equipments such as Personal Navigation

Device, digital fuel sensor or other (special firmware is needed for this).

Figure1. Example of application of

GPS/GSM TERMIN L

FMPro-3

for controlling and monitoring of remote objects

2.1. P CK GE CONTENTS

Figure2. FM-Pro3 device, Power, I/O cables and GPS antenna.

The FM-Pro3 device is supplied to the customer in a cardboard box containing all the

equipment that is necessary for operation. The package contains:

• The FM-Pro3 device.

• 10 pin plug with wires for power supply and I/O connection

• Magnetic GPS antenna with sticker.

• 12 pin plug with wires for C N-bus, 1-Wire, simplified RS232 and K-line connection.

2.2. DDITION L CCESSORIES

There are two accessories available for FM-Pro3 that is not included in the package:

• Temperature sensor

• I-Button

Note: the manufacturer does not supply a SIM card in the package, which is necessary for

connection to the GSM network! SIM card can be obtained from your local GSM service

provider! SIM card can work with the Terminal only when all SIM card security codes are

disabled!

If any of the components are not in the package, please contact the manufacturer’s

representative or the vendor (www.ruptela.com).

2.3. B SIC CH R CTERISTICS

Inputs / Outputs:

IO1 – 10 pin (2x5 plug):

IO2 – 12 pin (2x6 plug):

Paired connections scheme:

Other Inputs / Outputs are not paired. lso two spare Chassis pins can be paired with any

I/O, they are only for easier mounting.

2.4. TECHNIC L FE TURES:

Power supply External Battery Ratings:

+12/24V 1 /500m

Internal battery Ratings:

Li-Po 3.7V 800 m h

GPS Ublox module (with

external GPS antenna)

GPRS/GSM Simcom module (with

internal GPS antenna)

Motion

sensor

Micro vibration sensor

Fuses External fuse (mounted

into +B T wire):

F 2 L

Internal fuse (mounted

into internal battery

module):

SMD 2

LED’s GPS fix led,

GSM led,

Peripheral led,

ll LED’s are green.

Mini USB Mini USB socket

SIM Sim card holder with lock

Dimensions 92.2 x 64 x 25.2 mm

0 pin plug Tyco multi-lock 4-

794619-0 socket

Weight 140g

2 pin plug Tyco multi-lock 4-

794619-2 socket

Temperatures

Operational temp.:

-35°C ... +55°C

Storage temp.:

-40°C ... +65°C

Housing /

Material

UL94-HB Plastic case

2x Simplified

RS232 ports

PORT Rx, Tx

PORTB Rx, Tx

2.5. FM-PRO3 DIMENSIONS

Tabla de contenidos

Otros manuales de GPS de RUPTELA

RUPTELA

RUPTELA fm-eco4 light 3g Manual de usuario

RUPTELA

RUPTELA fm-eco4 light 3g Manual de usuario

RUPTELA

RUPTELA FM-Eco4 S Series Manual de usuario

RUPTELA

RUPTELA HCV5 Series Manual de instrucciones

RUPTELA

RUPTELA FM-Eco4 light T Manual de usuario

RUPTELA

RUPTELA fm-eco4 light 3g Manual de usuario

RUPTELA

RUPTELA fm-eco4 light 3g Manual de usuario

RUPTELA

RUPTELA PRO3 Manual de usuario

RUPTELA

RUPTELA FM-Tco4 HCV Manual de usuario

RUPTELA

RUPTELA FM-Pro4 Manual de usuario

RUPTELA

RUPTELA FM-Tco4 HCV Manual de usuario

RUPTELA

RUPTELA FM-Pro4 Manual de usuario

RUPTELA

RUPTELA HCV5 Series Manual de usuario

RUPTELA

RUPTELA FM-Eco3 Hoja de instrucciones

RUPTELA

RUPTELA fm-eco4 light 3g Manual de usuario

RUPTELA

RUPTELA HCV5 Series Manual de usuario

RUPTELA

RUPTELA HCV5 Series Manual de usuario

RUPTELA

RUPTELA fm-eco4 light 3g Manual de usuario

RUPTELA

RUPTELA FM Pro Manual de instalación

RUPTELA

RUPTELA FM-Plug4 Manual de usuario

RUPTELA

RUPTELA HCV5 Series Manual de instrucciones

RUPTELA

RUPTELA FM-Pro4 Manual de usuario

RUPTELA

RUPTELA HCV5 Series Manual de usuario

RUPTELA

RUPTELA FM-Plug 4 Manual de usuario

Manuales populares de GPS de otras marcas

Raven

Raven Cruizer II Manual

Hama

Hama 53118 Manual de usuario

Garmin

Garmin SOUNDER 125 Manual de usuario

Garmin

Garmin DEZL 580 Manual de usuario

Jigabot

Jigabot EX Manual de usuario

Pointer

Pointer Cellocator CelloTrack XT LTE Guía de instalación

Queclink

Queclink GV55LITE Manual de usuario

Voxson

Voxson Voxtrack GPS500 Manual de instrucciones

Garmin

Garmin ECHOMAP PLUS Manual de usuario

Starcom Systems

Starcom Systems Kylos Compact Manual de usuario

Garmin

Garmin 15 H Series Manual de usuario

Cobra

Cobra Marine MC 600Ci Manual de usuario

Cellocator

Cellocator CelloTrack T Manual de usuario

Enfora

Enfora Mini-MT GSM2228UG001 Manual de usuario

Magellan

Magellan eXplorist 100 Manual de usuario

LTE

LTE G50B Manual de usuario

Garmin

Garmin DEZL OTR500 Manual de usuario

SkyGolf

SkyGolf SkyCaddie SG1 Manual de usuario