RoyalTek RCD-3000 Manual de usuario

English 1

RoyalTek

BT GPS Speed Camera Warning Device

RCD-3000

(Utility Offline version)

Users Manual

Version 0.1

English 2

Content

1.Product Introduction .........................................................................................................................3

1.1 Overview................................................................................................................................3

1.2 Check the Package Content....................................................................................................3

1.3 Install RCD-3000 in your vehicle..........................................................................................4

1.4 Product Notification- Using Tips...........................................................................................4

1.5 Navigation Function via BT...................................................................................................5

2.Specification......................................................................................................................................6

2.1 Specification...........................................................................................................................6

2.2 LED Display & Audio Alarm ................................................................................................7

3.Installazione e utilizzo del software.............................................................錯誤! 尚未定義書籤。

3.1 Iniziare ad utilizzare “Speed Camera Detector Utility”....................錯誤! 尚未定義書籤。

3.2 Procedura di gestione PDI.................................................................錯誤! 尚未定義書籤。

3.3 SCDB (speed camera database) e impostazioni per l’importazione dei PDI錯誤! 尚未定義

書籤。

3.4 Scarico dati e di configurazione del Datalogger...............................錯誤! 尚未定義書籤。

3.5 Impostazioni acquisizione e verifica Log Status...............................錯誤! 尚未定義書籤。

3.6 Impostazioni SCDB ..........................................................................錯誤! 尚未定義書籤。

3.7 Informazioni sulla versione...............................................................錯誤! 尚未定義書籤。

English 3

1.1 Overview

Congratulations on your purchase of the BT GPS Camera warning device.

The Device is equipped with the latest generation SiRF Star III digital processor specially designed for fast and accurate

fix on GPS signals. The RCD-3000 will help you to drive safely, when the database has been downloaded, the device will

compare your position using its built-in GPS antenna with the position of every known danger locations and give you an

audible and visual warning as you approach them.

With the latest in GPS technology, RCD-3000 device also can become a BT GPS Receiver to deliver GPS information.

RCD-3000 will enhance your overall navigation experience.

Product Feature:

zAn all-in-one GPS receiver with BT navigation, datalog and Speed camera location alerts and

Speed limit alerts

zRecords longitude, latitude, UTC time, altitude, and velocity at preset intervals for up to

500,000 points.

zBuild in Li-ion battery, operation time over 8hours (average).

zConvenient transferring of logs files or Camera database via mini USB connector.

zMultiple LED lights for power, Bluetooth, and GPS status.

- READ FIRST -

The RCD-3000 comes with a database of cameras pre-loaded. However the road network is constantly being

modified. Please note that the database on the device will have been downloaded at the time of production so

may not be 100% accurate at the time of purchase. To ensure that your RCD-3000 works affectively we

recommend that you download it as soon as possible after purchase.

1.2 Check the Package Content

Before using RCD-3000, please make sure the package includes the items listed below. Please contact the

reseller immediately for any missing/damaged items.

1. RCD-3000 Device

2. USB cable

3. Car Charger

4. CD (user manual, SW utility)

5. Dashboard Pad

English 4

1.3 Install RCD-3000 in your vehicle

(A) Volume control: Rotate forward and backward to adjust the volume.

(B) Mini USB port: Connect with the USB Cable for data transfer or battery charging purpose.

zPlace the Dashboard Pad on your dashboard as close to the windscreen as possible in clear view of the driver’s line

of sight.

zPlace your RCD-3000 device on the dashboard pad, which is designed to hold it firmly in place.

zThe RCD-3000 has build in Li-ion battery; user also can connect the USB cable to the cigar lighter adapter provided

and insert the other end to s USB port. Once you turn on the.

1.4 Product Notification- Using Tips

1. Use the supplied dashboard pad, remove the backing from the base, fix it on the dashboard as close to

the windscreen as possible in clear view of the driver’s line of the sight and place your Detector onto the

pad

2. Cars that are equipped with heat dissipation films for the windshield and windows will degrade the GPS

performance.

3. For the most accurate position fix results and quickest acquisition time, please make sure that your device

is not in motion but stationary and in open spaces.

4. Connect to PC or Notebook for “Speed Camera Detector Utility”

@User can update the Camera database and manage the POI points using the supplied “Speed Camera

Detector Utility”.

Refer to the software installation and usage to install the software utility.

*POI: point of interest

5. We invite the driver to respect the driving rule and the law. We assume no any responsibility for any

damage or injury resulting from the wrong use of the product.

(B) Mini USB Port

(A) Volume Control

GPS Antenna

English 5

1.5 Navigation Function via BT

To make RCD-3000 Receiver work with your devices, a simple pairing step is required for the first time.

(Please follow the pairing instruction for Blue Tooth from your PDA or PC manufacturer.) To get RCD-3000

into pairing mode, all you need to do is simply switch on the power switch.

Once RCD-3000 is properly set up and connected to your PDAor PC, please refer to your navigation software

guidebook for instruction on navigation operation. RCD-3000 works with all NMEA enabled navigation

software.

English 6

2.1 Specification

GPS

GPS Chipset - Sirf Star III

Frequency - L1, 1,575.42 MHz

Channel - 20 parallel

C/A Code - 1,023 MHz

Fix time

(Open SKY,typical) - Reacquisition: less than 1s

- Hot start: less than 1s

- Warm start: less than 35s

- Cold start: less than 35s

Accuracy - Position: within 10m for 90%

- Velocity: 0.1m/s

Interface Protocol - Output message: NMEA0183 ver. 3.0,GGA, GSA, RMC and GSV every 1s,

- Baud rate 57,600bps

Dynamics

Altitude - 18,000 meter maximum

Velocity - 514 meter/second maximum

Internal Antenna

Type Build in Patch Antenna

Location Log

Flash Type 64Mb Serial Flash

Log data UTC Time, Longitude, Latitude, Altitude, Velocity

Log Interval 1secs ~ 60secs, user configurable (Default 15secs)

Records Over 500,000 points

Log duration: Over 180 days (For log interval 15 sec and log 12 hours for a days)

Set Logger

Configuration There are three types setting for intervals.

Default setting is UTC Time, Longitude, Latitude (User Configurable)

For Type 1: UTC Time, Longitude, Latitude, will be saved.

For Type 2: UTC Time, Longitude, Latitude, Altitude, will be saved.

For Type 3: UTC Time, Longitude, Latitude, Altitude, Velocity will be saved.

Device Interface

External Connector port Mini USB 5 pins

- For Power Charging

- For SCDB Upload

Button Power Switch

Volume Control VR

Lamp Indicator LED Show Battery Power, Speed Camera alert, GPS status and BT Connection

Bluetooth

Bluetooth Operating

Frequency 2.402~2.48385 GHz

Bluetooth 2.0 certified (Class 2)

Power Source

Replaceable No

Battery Li-ion Type, rechargeable

Others

Operation Time Over 8 hrs (average)

Temperature - Operating: -10 ~ +60℃

- Storage: -10 ~ +60℃

Dimension Dimension: 80 x 32.6 x 26.8mm

Weight ≦45g

English 7

2.2 LED Display & Audio Alarm

Front View

Event LED Display Audio Alarm

1 GPS outage Green LED, Blinking X

2 GPS fixed Green LED, Glowing 2 beeps

Not exceed

speed Glowing 3 beeps

3 Approach Certified Fix

Camera Zone and pre-alert

(distance less than* 1500

meter- Notification range) Over speed

Red LED

Blinking 2 beeps in every 3 seconds

Not exceed

speed Glowing 3 beeps

4 Approach Certified Fix

Camera Zone and pre-alert

(distance less than *500

meter- Critical range) Over speed

Red LED

Blinking Beeps continuously

Not exceed

speed Glowing 3 beeps

5 Approach Mobile Camera

Zone or User defined POI

and pre-alert Over speed

Orange LED

Blinking 2 beeps in every 3 seconds

6 BT Connected Blue LED Glowing X

7 BT Searching Blue LED Blinking X

8 Low battery Red LED Glowing X

9 Power charging Yellow LED, Glowing X

10 Full power X X

*Depending on local SCDB conditions.

English 8

3.1 Start to use “Speed Camera Detector Utility”

Check the COM port of RCD-3000 first. Click “Start” Æ“Control Panel”Æ”Performance and

Maintenance”Æ“System”, and you will see the System Properties dialog box; click on

“Hardware” tab and then the “Device Manager” button. Expand the “Ports (COM & LPT)” item,

and the “Prolific USB-to-Serial Comm Port” is the COM port of your RCD-3000.

The user should connect the device first. (Connect device with PC via USB Cable)

Please select comm. port and press the “connect” button.

When you execute the program, the following Figure 1 is shown.

Note: (1) System will download the POI points from device automatically.

Please wait the “Get All Datalogger Head” finished. The following figure 3 is

shown.

(2) If user wants to upload SCDB data, please be sure to pre download datalog

data in advance.

(3) Datalog data will be deleted after upload SCDB process is done.

Figure1

Figure2 and Figure3 show when you press the button “Connect”, the utility notifies the user

that the device will enter the operation mode, all functions of the device are disabled.

English 9

Figure2

Figure3

Figure 4 is shown System will download the POI points from device automatically.

POI data will be erased from device after POI load process done.

English 10

Figure 4

If the figure 5 dialog is shown, it means there is no POI data in the device.

Figure 5

3.2 POI Management Procedure

When proceed the POI Management, system will auto create the POI folder for POI data

download.

Note:POI data are stored in the PC side and named POI.csv and stored in the subdirectory

/POI/.

User can load POI data, delete POI data or Save POI data by using the Utility.

Note:

Tabla de contenidos

Otros manuales de GPS de RoyalTek

RoyalTek

RoyalTek RBT-2210 Manual de usuario

RoyalTek

RoyalTek RGM-3800 Manual de usuario

RoyalTek

RoyalTek RGM-3550LP Manual de usuario

RoyalTek

RoyalTek RN1 Manual de usuario

RoyalTek

RoyalTek RN5 Manual de usuario

RoyalTek

RoyalTek RGM-4600 Guía de inicio rápido

RoyalTek

RoyalTek RBT-2300 Manual de usuario

RoyalTek

RoyalTek Navi@Mouse Manual de usuario

RoyalTek

RoyalTek RGM-3800 Manual de usuario

RoyalTek

RoyalTek RBT-2210 Manual de usuario

RoyalTek

RoyalTek RCD-1100 Manual de usuario

RoyalTek

RoyalTek RBT-2001 Manual de usuario

RoyalTek

RoyalTek NS-4102 Manual de usuario

RoyalTek

RoyalTek RBT-1000 Manual de usuario

RoyalTek

RoyalTek REB-1315S5 Guía de inicio rápido

RoyalTek

RoyalTek Sapphire RGM-2000 Manual de usuario

RoyalTek

RoyalTek REB-1315LPNX Manual de usuario

RoyalTek

RoyalTek RN2 Manual de usuario

RoyalTek

RoyalTek REB-4315 Guía de inicio rápido

RoyalTek

RoyalTek RGM-3800 Manual de usuario

RoyalTek

RoyalTek MEB-1000 Manual de usuario

RoyalTek

RoyalTek REB-1315LP Guía de inicio rápido

RoyalTek

RoyalTek REB-1722 Series Guía de inicio rápido

RoyalTek

RoyalTek REB-3000 Guía de inicio rápido

Manuales populares de GPS de otras marcas

Raven

Raven Cruizer II Manual

Hama

Hama 53118 Manual de usuario

Garmin

Garmin SOUNDER 125 Manual de usuario

Garmin

Garmin DEZL 580 Manual de usuario

Jigabot

Jigabot EX Manual de usuario

Pointer

Pointer Cellocator CelloTrack XT LTE Guía de instalación

Queclink

Queclink GV55LITE Manual de usuario

Voxson

Voxson Voxtrack GPS500 Manual de instrucciones

Garmin

Garmin ECHOMAP PLUS Manual de usuario

Starcom Systems

Starcom Systems Kylos Compact Manual de usuario

Garmin

Garmin 15 H Series Manual de usuario

Cobra

Cobra Marine MC 600Ci Manual de usuario

Cellocator

Cellocator CelloTrack T Manual de usuario

Enfora

Enfora Mini-MT GSM2228UG001 Manual de usuario

Magellan

Magellan eXplorist 100 Manual de usuario

LTE

LTE G50B Manual de usuario

Garmin

Garmin DEZL OTR500 Manual de usuario

SkyGolf

SkyGolf SkyCaddie SG1 Manual de usuario