ROSE DISPLAYS ANOSKYBOX-TOP LOADING 3 WAY Manual de usuario

The AnoSkybox™ is a trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #03INAnoSkyboxTopLoad3Way

Incept-2.07.03

Top Load 3-Way Instruction Sheet

Page 1 of 2

Note:

We recommended that two people

assemble this AnoSkybox.

Step 1a

Slide spine into vertical rail.

Step 1b

Slide another vertical rail onto the

other edge of spine. Repeat for all

vertical rails and spines.

Step 2

Carefully insert corner brackets into

ends of bottom rails, using thumb as

shown in illustration. Two brackets

per end of each rail. Bracket can

bend if forced.

Detail- It is important that the corner

bracket tension tab faces toward

outside of frame. (2b)

Step 3

Lay out the bottom rails on the floor as

they will be configured.

AnoSkybox™

Instructions for Assembly

Corner brackets

Parts

Single rails Split rails

(Continued on other side)

2a 2b

1a 1b

35 Congress Street, Salem, MA 01970

Tel# 1- 800 631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

3-Way

Spines with

pre-drilled holes

The AnoSkybox™ is a trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #03INAnoSkyboxTopLoad3Way

Incept-2.07.03

Instructions for Assembly continued

Step 4

Assemble the vertical rail assemblies

onto the upward facing corner brackets

already inserted into the bottom rails.

All four brackets should go into the

vertical rails at one time.

Note: Insert end of spine without the

predrilled holes. Holes should

remain at the top of the AnoSkybox

for hanging.

Step 5

Insert corner brackets into ends

of split rails, 1 per end. Use thumb

as shown in illustration.

Step 6

Assemble split rails onto top ends

of vertical rails, one inside and one

outside of each side of the AnoSkybox.

Step 7

Insert and change signs through top

of each side.

Step 8

Assemble hanging hardware by

inserting hooks through holes on the

spines.

Step 9

Hang the completed assembly.

AnoSkybox™

4 5

35 Congress Street, Salem, MA 01970

Tel# 1- 800 631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Top Load 3-Way Instruction Sheet

Page 2 of 2

The AnoSkybox™ is a trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #03INAnoSkyboxTopLoad3Way

Incept-2.07.03

Note:

We recommended that two people

assemble this AnoSkybox.

Step 1a

Slide spine into vertical rail.

Step 1b

Slide another vertical rail onto the

other edge of spine. Repeat for all

vertical rails and spines.

Step 2

Carefully insert corner brackets into

ends of bottom rails, using thumb as

shown in illustration. Two brackets

per end of each rail. Bracket can

bend if forced.

Detail- It is important that the corner

bracket tension tab faces toward

outside of frame. (2b)

Step 3

Lay out the bottom rails on the floor as

they will be configured.

AnoSkybox™

Instructions for Assembly

Corner brackets

Parts

Single rails Split rails

(Continued on other side)

2a 2b

1a 1b

3-Way

Spines with

pre-drilled holes

Top Load 3-Way Instruction Sheet

Page 1 of 2

The AnoSkybox™ is a trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #03INAnoSkyboxTopLoad3Way

Incept-2.07.03

Instructions for Assembly continued

Step 4

Assemble the vertical rail assemblies

onto the upward facing corner brackets

already inserted into the bottom rails.

All four brackets should go into the

vertical rails at one time.

Note: Insert end of spine without the

predrilled holes. Holes should

remain at the top of the AnoSkybox

for hanging.

Step 5

Insert corner brackets into ends

of split rails, 1 per end. Use thumb

as shown in illustration.

Step 6

Assemble split rails onto top ends

of vertical rails, one inside and one

outside of each side of the AnoSkybox.

Step 7

Insert and change signs through top

of each side.

Step 8

Assemble hanging hardware by

inserting hooks through holes on the

spines.

Step 9

Hang the completed assembly.

AnoSkybox™

4 5

Top Load 3-Way Instruction Sheet

Page 2 of 2

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios de ROSE DISPLAYS

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT WEIGHTED BASE Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA ROUND WITH WALL HANGERS Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK WITH PEG Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA ROUND WITH CABLE AND BALL Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH LOOP TO LOOP Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS SUPERSNAP WITH BALL CHAIN Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS RAN-BAS-CC WITH CORD AND BARB Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH ADHESIVE Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS SIDE-LOADING ANOSKYBOX Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT SCREW BASE Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH WINDOW MOUNTS Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ECONOFRAME WITH MULTICLIP Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS SUPERSNAP WITH MULTICLIPS Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS QUICKGRIP WITH MULTICLIPS Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH V CLIP Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ROPOLE-SPIDER Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ECONOFRAME WITH WINDOW MOUNTS Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS SLIM HOLDER Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT CLAMP BASE Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME SQUARE WITH MULTICLIPS Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT WEIGHTED BASE SQ Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK SQUARE WITH MULTICLIPS Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS TILE DIVIDER Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS GIRDER GRIPPER Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario