ROSE DISPLAYS ANOQUICK SQUARE WITH CABLE CLIP AND CABLE AND... Manual de usuario

35 Congress Street, Salem, MA 01970

Tel# 1-800-631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Parts

Square Profile Instruction Sheet

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Place cable onto inner channel of Cable Clip. The

cable should snap into place. Fig. 3

Step 4

Align one end of the Cable Clip with the top

channel of the aluminum holder. Then insert one

round end, then press down on the other round

end and slide Cable Clip into rail. Fig. 4

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick, Cable Clips,

End Caps and MultiClips for future projects.

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

AnoQuick™

Instructions For Hanging

Incept-9.27.02

Figure 2

The AnoQuick is a trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #02INSAnoQuickSQCableClipSaucer

Figure 6

Figure 5

Figure 1

Figure 3 Figure 4

End Caps

06-5545

AnoQuick

12A300SQ

Cable Clips

06-5050

Cable and

Saucer

16-0018SS

35 Congress Street, Salem, MA 01970

Tel# 1-800-631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Parts

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

Instructions For Hanging

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Place cable onto inner channel of Cable Clip. The

cable should snap into place. Fig. 3

Step 4

Align one end of the Cable Clip with the top

channel of the aluminum holder. Then insert one

round end, then press down on the other round

end and slide Cable Clip into rail. Fig. 4

Note: For OneUp applications, the AnoQuick

holder is conveniently marked in the center.

Slide the Cable Clip to the mark.

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick, Cable Clips,

End Caps and MultiClip for future projects.

Incept-9.27.02

The AnoQuick is a trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #02INSAnoQuickSQCableClipSaucer

Square Profile OneUp

Instruction Sheet

AnoQuick™

Figure 2

Figure 6

Figure 5

Figure 1

Figure 3 Figure 4

End Caps

06-5545

AnoQuick

12A300SQ

Cable Clip

06-5050

Cable and

Saucer

16-0018SS

Parts

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

Instructions For Hanging

Incept-9.27.02

The AnoQuick is a trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #02INSAnoQuickSQCableClipSaucer

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Place cable onto inner channel of Cable Clip. The

cable should snap into place. Fig. 3

Step 4

Align one end of the Cable Clip with the top

channel of the aluminum holder. Then insert one

round end, then press down on the other round

end and slide Cable Clip into rail. Fig. 4

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick, Cable Clips,

End Caps and MultiClips for future projects.

Square Profile Instruction Sheet

AnoQuick™

Figure 2

Figure 6

Figure 5

Figure 1

Figure 3 Figure 4

End Caps

06-5545

AnoQuick

12A300SQ

Cable Clips

06-5050

Cable and

Saucer

16-0018SS

Parts

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

Instructions For Hanging

Incept-9.27.02

End Caps

06-5545

AnoQuick

12A300SQ

The AnoQuick is a trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #02INSAnoQuickSQCableClipSaucer

Cable Clip

06-5050

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Place cable onto inner channel of Cable Clip. The

cable should snap into place. Fig. 3

Step 4

Align one end of the Cable Clip with the top

channel of the aluminum holder. Then insert one

round end, then press down on the other round

end and slide Cable Clip into rail. Fig. 4

Note: For OneUp applications, the AnoQuick

holder is conveniently marked in the center.

Slide the Cable Clip to the mark.

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick, Cable Clips,

End Caps and MultiClip for future projects.

Square Profile OneUp

Instruction Sheet

AnoQuick™

Figure 2

Figure 6Figure 5

Figure 1

Figure 3 Figure 4

Cable and

Saucer

16-0018SS

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios de ROSE DISPLAYS

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH FISH CLIP Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOCONNECTOR WITH ANOGOTCHA Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ECONOFRAME WITH CABLE CLIP AND BALL CHAIN Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME SQUARE WITH CABLE CLIP AND BALL... Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOSCREEN WITH BASE RAIL Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS PIG TAIL Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ECONOSTAND WITH ANOQUICK Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA PLUS WITH MULTICLIPS AND REGULAR... Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS RAN-BAS-CC WITH LOOP AND SAUCER AND... Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS SNAIL ADHESIVE-GENERIC Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK WITH PEG Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS QUICKGRIP WITH CABLE CLIP AND LOOP AND... Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK ROUND WITH WINDOW MOUNTS Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS COVER Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME ROUND ASSEMBLED-SLATWALL Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS QUICKGRIP WITH CABLE CLIP AND CABLE AND... Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOSKYBOX-TOP LOADING 3 WAY Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS SUPERSNAP WITH CABLE CLIP AND LOOP AND... Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS QUICKGRIP WITH WINDOW MOUNTS Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA ROUND WITH CABLE CLIP AND CABLE AND... Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS SNAIL ADHESIVE WITH CEILING SLUG Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA SQUARE WITH CABLE CLIP AND BALL... Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOKIOSK-STACKABLE Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME SQUARE WITH MULTICLIPS Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario