Roland SOLJET PROIII DU-740 Manual de usuario
USER'S MANUAL
Auxiliary Drying Unit
Thank you very much for purchasing this product.
➢To ensure correct and safe usage with a full understanding of this product's performance, please be
sure to read through this manual completely and store it in a safe location.
➢Unauthorized copying or transferral of this manual, in whole or in part, is prohibited.
➢The contents of this document and the specifications of this product are subject to change without
notice.
➢The documentation and the product have been prepared and tested as much as possible. If you
find any misprint or error, please inform us.
➢Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may
occur through use of this product, regardless of any failure to perform on the part of this product.
➢Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may
occur with respect to any article made using this product.
For the USA
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE
STATEMENT
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated
in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference
to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Unauthorized changes or modification to this system can void
the users authority to operate this equipment.
NOTICE
Grounding Instructions
Do not modify the plug provided––if it will not fit the outlet,
have the proper outlet installed by a qualified electrician.
Check with qualified electrician or service personnel if the
grounding instructions are not completely understood, or if in
doubt as to whether the tool is properly grounded.
Use only 3-wire extension cords that have 3-prong
grounding plugs and 3-pole receptacles that accept the tool’s
plug.
Repair or replace damaged or worn out cord immediately.
For Canada
CLASS A NOTICE
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
CLASSE A AVIS
Cet appareil numérique de la classe A respecte toutes les
exigences du Règlement sur le matériel brouilleur du
Canada.
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
1
Contents
Copyright © 2007 Roland DG Corporation
Company names and product names are trademarks or registered trademarks of their respective holders.
http://www.rolanddg.com/
To Ensure Safe Use ....................................................................................................................... 2
Pour utiliser en toute sécurité .................................................................................................... 8
Chapter 1 Introduction ...................................................................................................................... 15
1-1 About This Machine ............................................................................................................................................. 16
What's the DU-740/640/540? ....................................................................................................... 16
Compatible Printers (As of September 2007) ................................................................................. 16
1-2 Part Names and Functions ................................................................................................................................ 17
1-3 Included Items ...................................................................................................................................................... 18
1-4 Installing on the Printer ...................................................................................................................................... 19
Step 1: Install the Drying-heater Unit ............................................................................................ 19
Step 2: Install the Blower-fan Unit ................................................................................................. 22
1-5 Connecting the Cables ....................................................................................................................................... 24
Connecting the Cables .................................................................................................................. 24
Chapter 2 Operation .......................................................................................................................... 25
2-1 Operation of the Drying-heater Unit ............................................................................................................. 26
What to Do First ............................................................................................................................ 26
Switching the Power On and Off ................................................................................................... 26
Making the Temperature Setting for the Drying-heater Unit .......................................................... 27
2-2 Operation of the Blower-fan Unit ................................................................................................................... 28
Switching the Blower-fan Unit On................................................................................................. 28
Chapter 3 Appendix ........................................................................................................................... 29
3-1 What to Do If ....................................................................................................................................................... 30
The Drying-heater Unit Doesn't Get Hot....................................................................................... 30
The Blower-fan Unit Doesn't Run. ................................................................................................. 30
If a Message Appears ..................................................................................................................... 30
3-2 Locations of the Power Rating and Serial Number Labels ........................................................................ 31
3-3 Specifications ......................................................................................................................................................... 32
This document is the user's manual for the DU-740, the DU-640, and the DU-540. Also, most of the figures in this
document depict the DU-540 and the XC-540.
2
Used for instructions intended to alert the user to the risk of death or severe
injury should the unit be used improperly.
About WARNING and CAUTION Notices
Used for instructions intended to alert the user to the risk of injury or material
damage should the unit be used improperly.
Note: Material damage refers to damage or other adverse effects caused with
respect to the home and all its furnishings, as well to domestic animals
or pets.
WARNING
CAUTION
About the Symbols
The symbol alerts the user to important instructions or warnings. The specific meaning of
the symbol is determined by the design contained within the triangle. The symbol at left means
"danger of electrocution."
The symbol alerts the user to items that must never be carried out (are forbidden). The
specific thing that must not be done is indicated by the design contained within the circle. The
symbol at left means the unit must never be disassembled.
The symbol alerts the user to things that must be carried out. The specific thing that must be
done is indicated by the design contained within the circle. The symbol at left means the power-
cord plug must be unplugged from the outlet.
To Ensure Safe Use
Improper handling or operation of this machine may result in injury or damage to property.
Points which must be observed to prevent such injury or damage are described as follows.
To Ensure Safe Use
3
WARNING
Be sure to follow the operation proce-
dures described in this documentation.
Never allow anyone unfamiliar with the
usage or handling of the machine to touch
it.
Incorrect usage or handling may lead to an acci-
dent.
Keep children away from the machine.
The machine includes areas and components
that pose a hazard to children and may result in
injury, blindness, choking, or other serious acci-
dent.
Never operate the machine while tired or
after ingesting alcohol or any medication.
Operation requires unimpaired judgment. Im-
paired judgment may result in an accident.
Never use the machine for any purpose
for which it is not intended, or use the
machine in an undue manner that exceeds
its capacity.
Doing so may result in injury or fire.
For accessories (consumable items,power
cord, and the like), use only genuine ar-
ticles compatible with this machine.
Incompatible items may lead to an accident.
Before attempting cleaning,maintenance,
or attachment or detachment of optional
items, disconnect the power cord.
Attempting such operations while the machine
is connected to a power source may result in
injury or electrical shock.
Never attempt to disassemble, repair, or
modify the machine.
Doing so may result in fire, electrical shock, or
injury. Entrust repairs to a trained service tech-
nician.
CAUTION
Conduct operations in a clean, brightly lit
location.
Working in a location that is dark or cluttered
may lead to an accident,such as becoming caught
in the machine as the result of an inadvertent
stumble.
Keep the fingers and face away from the
blower fan.
Fingers or hair may become entangled,resulting
in injury.
Never climb or lean on the machine.
The machine is not made to support a person.
Climbing or leaning on the machine may dis-
lodge components and cause a slip or fall, re-
sulting in injury.
Incorrect operation may cause injury.
To Ensure Safe Use
4
WARNING
Connect to an electrical outlet that com-
plies with this machine's ratings (for volt-
age, frequency, and current).
Incorrect voltage or insufficient current may
cause fire or electrical shock.
Never use out of doors or in any location
where exposure to water or high humid-
ity may occur.Never touch with wet hands.
Doing so may result in fire or electrical shock.
Never allow any foreign object to get in-
side. Never expose to liquid spills.
Inserting objects such as coins or matches or
allowing beverages to be spilled into the venti-
lation ports may result in fire or electrical shock.
If anything gets inside, immediately disconnect
the power cord and contact your authorized
Roland DG Corp. dealer.
Never place any flammable object nearby.
Never use a combustible aerosol spray
nearby. Never use in any location where
gases can accumulate.
Combustion or explosion may be a danger.
Handle the power cord, plug, and electri-
cal outlet correctly and with care. Never
use any article that is damaged.
Using a damaged article may result in fire or
electrical shock.
When using an extension cord or power
strip, use one that adequately satisfies the
machine's ratings (for voltage, frequency,
and current).
Use of multiple electrical loads on a single elec-
trical outlet or of a lengthy extension cord may
cause fire.
WARNING
Connect to ground.
This can prevent fire or electrical shock due to
current leakage in the event of malfunction.
Position so that the power plug is within
immediate reach at all times.
This is to enable quick disconnection of the
power plug in the event of an emergency. Install
the machine next to an electrical outlet. Also,
provide enough empty space to allow immedi-
ate access to the electrical outlet.
If sparking, smoke, burning odor, unusual
sound, or abnormal operation occurs, im-
mediately unplug the power cord. Never
use if any component is damaged.
Continuing to use the machine may result in fire,
electrical shock, or injury. Contact your autho-
rized Roland DG Corp. dealer.
When the machine will be out of use for a
prolonged period, disconnect the power
cord.
This can prevent accidents in the event of cur-
rent leakage or unintended startup.
Ratings
Danger of electrical short, shock, electrocution, or fire
To Ensure Safe Use
5
Important notes about the power cord, plug, and electrical outlet
Never place any object on top or subject to
damage.
Never bend or twist with undue force.
Never pull with undue force.
Never bundle, bind, or roll up.
Never allow to get wet.
Never make hot.
Dust may cause fire.
To Ensure Safe Use
6
WARNING
Caution: high temperatures
Areas such as the dryer become hot. Exercise
caution to avoid fire or burns.
Danger of fire or burns
To Ensure Safe Use
7
Warning labels are affixed to make areas of danger immediately clear.The meanings of these
labels are as follows. Be sure to heed their warnings.
Also, never remove the labels or allow them to become obscured.
Warning Labels
Caution: HighTemperature
The platen and dryer become hot.
Exercise caution to avoid fire or burns.
8
Pour utiliser en toute sécurité
La manipulation ou l'utilisation inadéquates de cet appareil peuvent causer des blessures ou
des dommages matériels.Les précautions à prendre pour prévenir les blessures ou les dommages
sont décrites ci-dessous.
Utilisé pour avertir l'utilisateur d'un risque de décès ou de blessure grave en
cas de mauvaise utilisation de l'appareil.
Avis sur les avertissements
Utilisé pour avertir l'utilisateur d'un risque de blessure ou de dommage matériel
en cas de mauvaise utilisation de l'appareil.
* Par dommage matériel, il est entendu dommage ou tout autre effet
indésirable sur la maison, tous les meubles et même les animaux
domestiques.
ATTENTION
PRUDENCE
À propos des symboles
Le symbole attire l'attention de l'utilisateur sur les instructions importantes ou les
avertissements. Le sens précis du symbole est déterminé par le dessin à l'intérieur du triangle.
Le symbole à gauche signifie "danger d'électrocution."
Le symbole avertit l'utilisateur de ce qu'il ne doit pas faire, ce qui est interdit. La chose
spécifique à ne pas faire est indiquée par le dessin à l'intérieur du cercle. Le symbole à gauche
signifie que l'appareil ne doit jamais être démonté.
Le symbole prévient l'utilisateur sur ce qu'il doit faire. La chose spécifique à faire est indiquée
par le dessin à l'intérieur du cercle. Le symbole à gauche signifie que le fil électrique doit être
débranché de la prise.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Impresora de Roland
Roland
Roland TrueVIS AP-640 Manual de usuario
Roland
Roland ColorCAMM PRO PC-600 Manual de instrucciones
Roland
Roland VersaSTUDIO BN-20A Manual de usuario
Roland
Roland FLATJET FLJ-300 Manual de usuario
Roland
Roland VersaUV LEF-12 Manual de usuario
Roland
Roland VersaCamm SP-300V Manual de usuario
Roland
Roland FJ-500 Manual de usuario
Roland
Roland SC-545EX Print&Cut Manual de usuario
Roland
Roland VersaART RS-640 Manual de usuario
Roland
Roland VersaUV LEF2-200 Manual de operación y mantenimiento
Roland
Roland VersaCamm VP-540i Manual de usuario
Roland
Roland TrueVIS VG2-640 Manual de funcionamiento
Roland
Roland VersaUV LEF-12 Manual de uso y cuidado
Roland
Roland VersaUV LEF-20 Manual de uso y cuidado
Roland
Roland SJ-745EX Guía de inicio rápido
Roland
Roland VersaCamm SP-540V Manual de operación y mantenimiento
Roland
Roland VS-640 Manual de usuario
Roland
Roland Hi-Fi Express FP-740 Manual de usuario
Roland
Roland VersaStudio BN-20 Manual de usuario
Roland
Roland SOLJET PROIII XC-540 Manual de usuario
