Rohde & Schwarz EVSG1000 Manual de usuario
R&S®EVSG1000
VHF/UHF Airnav/Com
Analyzer
Getting Started
Getting Started
Version 04
1329872102
(=MåE2)
This document describes the following R&S®EVSG1000 models with firmware
version 1.40 or later:
●R&S®EVSG1000 (1329.8009.02)
Furthermore, it covers the following options:
●R&S®EVSG-B1 Second Signal Processing Unit (1329.8809.02)
●R&S®EVSG-B2 Battery Management (1329.8815.02)
●R&S®EVSG-B3 Battery Pack (1329.8821.02)
●R&S®EVSG1-K7 LF-Analysis (1329.9163.02)
●R&S®EVSG-K20 GPS Support (1329.9092.02)
© 2020 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Email: [email protected]
Internet: www.rohde-schwarz.com
Subject to change – data without tolerance limits is not binding.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
1329.8721.02 | Version 04 | R&S®EVSG1000
The following abbreviations are used throughout this manual: R&S®EVSG1000 is abbreviated as
R&S EVSG1000.
Contents
R&S®EVSG1000
3Getting Started 1329.8721.02 ─ 04
Contents
1 Safety Information................................................................. 7
1.1 Safety Instructions................................................................................7
1.2 Labels on the Product........................................................................ 11
1.3 Warning Messages in the Documentation........................................12
2 Documentation Overview....................................................13
2.1 Getting Started Manual.......................................................................13
2.2 User Manuals and Help...................................................................... 13
2.3 Printed Safety Instructions................................................................ 13
2.4 Data Sheets and Brochures............................................................... 13
2.5 Release Notes and Open-Source Acknowledgment (OSA)............ 14
3 Key Features........................................................................ 15
4 Preparing for Use.................................................................16
4.1 Unpacking and Checking................................................................... 16
4.2 Lifting and Carrying............................................................................16
4.3 Choosing the Operating Site............................................................. 17
4.4 Setting Up the R&S EVSG1000.......................................................... 17
4.4.1 Placing the R&S EVSG1000 on a Bench Top.......................................18
4.4.2 Mounting the R&S EVSG1000 in a Rack..............................................18
4.4.3 Portable Operation................................................................................19
4.5 Connecting to Power.......................................................................... 20
4.5.1 Connecting the Provided AC/DC Power Supply Connector..................20
4.5.2 Connecting an External DC Power Source...........................................21
4.5.3 Using an Optional Battery Pack (R&S EVSG-B3).................................21
4.6 Switching On or Off............................................................................ 22
Contents
R&S®EVSG1000
4Getting Started 1329.8721.02 ─ 04
4.7 Performing an Auto-Calibration........................................................ 24
4.8 Connecting Devices for Signal Input and Output............................ 25
4.9 Connecting to LAN............................................................................. 25
5 Instrument Tour................................................................... 27
5.1 Front Panel.......................................................................................... 27
5.1.1 Power Key.............................................................................................28
5.1.2 Display.................................................................................................. 28
5.1.3 RX1 IN / RX2 IN....................................................................................28
5.1.4 USB.......................................................................................................29
5.1.5 AF Out...................................................................................................29
5.1.6 12 V DC Out..........................................................................................29
5.1.7 System Keys......................................................................................... 29
5.1.8 Softkeys................................................................................................ 30
5.1.9 Function Keys....................................................................................... 30
5.1.10 Keypad..................................................................................................31
5.1.11 Rotary Knob.......................................................................................... 31
5.1.12 Navigation Keys.................................................................................... 32
5.2 Rear Panel........................................................................................... 33
5.2.1 Power Supply........................................................................................34
5.2.2 Li-Ion Battery Pack................................................................................34
5.2.3 LAN (Ethernet)...................................................................................... 34
5.2.4 RS232 GPS.......................................................................................... 35
5.2.5 PPS In...................................................................................................35
5.2.6 Trigger In...............................................................................................35
5.2.7 LF In (Baseband/Low Frequency Input)................................................35
5.2.8 Demod Out............................................................................................35
5.2.9 Loudspeaker......................................................................................... 35
Contents
R&S®EVSG1000
5Getting Started 1329.8721.02 ─ 04
5.2.10 Device ID.............................................................................................. 36
5.3 Accessories.........................................................................................36
6 Operating Basics................................................................. 40
6.1 Understanding the Display Information............................................40
6.2 Manual Operation................................................................................42
6.2.1 Changing Settings and Activating Functions........................................ 43
6.2.2 Entering Data........................................................................................ 43
6.2.3 Getting Help.......................................................................................... 45
6.3 Manual Operation from a VNC Viewer...............................................48
6.4 Remote Control................................................................................... 50
7 Contacting Customer Support........................................... 51
Index..................................................................................... 52
Contents
R&S®EVSG1000
6Getting Started 1329.8721.02 ─ 04
Safety Information
R&S®EVSG1000
7Getting Started 1329.8721.02 ─ 04
1 Safety Information
The product documentation helps you use the product safely and efficiently. Fol-
low the instructions provided here and in the Chapter 1.1, "Safety Instructions",
on page 7.
Intended use
The product is intended for maintenance and servicing of ILS, VOR and marker
beacon ground stations and analyzing ATC COM signals. The portable, robust
design and the integrated battery allow for network-independent measurements
also outdoors. Use the product only for its designated purpose. Observe the oper-
ating conditions and performance limits stated in the data sheet.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential
dangers and gives instructions on how to prevent personal injury or damage
caused by dangerous situations. Safety information is provided as follows:
●In Chapter 1.1, "Safety Instructions", on page 7. The same information is
provided in many languages as printed "Safety Instructions". The printed
"Safety Instructions" are delivered with the product.
●Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
1.1 Safety Instructions
Products from the Rohde & Schwarz group of companies are manufactured
according to the highest technical standards. To use the products safely, follow
the instructions provided here and in the product documentation. Keep the prod-
uct documentation nearby and offer it to other users.
Use the product only for its intended use and within its performance limits. Inten-
ded use and limits are described in the product documentation such as the data
sheet, manuals and the printed safety instructions. If you are unsure about the
appropriate use, contact Rohde & Schwarz customer service.
Safety Instructions
Safety Information
R&S®EVSG1000
8Getting Started 1329.8721.02 ─ 04
Using the product requires specialists or specially trained personnel. These users
also need sound knowledge of at least one of the languages in which the user
interfaces and the product documentation are available.
If any part of the product is damaged or broken, stop using the product. Never
open the casing of the product. Only service personnel authorized by
Rohde & Schwarz are allowed to repair the product. Contact Rohde & Schwarz
customer service at http://www.customersupport.rohde-schwarz.com.
Lifting and carrying the product
The maximum weight of the product is provided in the data sheet. To move the
product safely, you can use lifting or transporting equipment such as lift trucks
and forklifts. Follow the instructions provided by the equipment manufacturer.
Choosing the operating site
Only use the product indoors. The product casing is not waterproof. Water that
enters can electrically connect the casing with live parts, which can lead to elec-
tric shock, serious personal injury or death if you touch the casing. If
Rohde & Schwarz provides a carrying bag designed for your product, you can
use the product outdoors.
Unless otherwise specified, you can operate the product up to an altitude of
2000 m above sea level. The product is suitable for pollution degree 2 environ-
ments where nonconductive contamination can occur. For more information on
environmental conditions such as ambient temperature and humidity, see the
data sheet.
Setting up the product
Always place the product on a stable, flat and level surface with the bottom of the
product facing down. If the product is designed for different positions, secure the
product so that it cannot fall over.
If the product has foldable feet, always fold the feet completely in or out to ensure
stability. The feet can collapse if they are not folded out completely or if the prod-
uct is moved without lifting it. The foldable feet are designed to carry the weight of
the product, but not an extra load.
If stacking is possible, keep in mind that a stack of products can fall over and
cause injury.
If you mount products in a rack, ensure that the rack has sufficient load capacity
and stability. Observe the specifications of the rack manufacturer. Always install
Safety Instructions
Safety Information
R&S®EVSG1000
9Getting Started 1329.8721.02 ─ 04
the products from the bottom shelf to the top shelf so that the rack stands
securely. Secure the product so that it cannot fall off the rack.
Connecting to power
The product is an overvoltage category II product and has to be connected to a
fixed installation used to supply energy-consuming equipment such as household
appliances and similar loads. Be aware that electrically powered products have
risks, such as electric shock, fire, personal injury or even death.
Take the following measures for your safety:
●Before switching on the product, ensure that the voltage and frequency indica-
ted on the product match the available power source. If the power adapter
does not adjust automatically, set the correct value and check the rating of the
fuse.
●If a product has an exchangeable fuse, its type and characteristics are indica-
ted next to the fuse holder. Before changing the fuse, switch off the instrument
and disconnect it from the power source. How to change the fuse is described
in the product documentation.
●Only use the power cable delivered with the product. It complies with country-
specific safety requirements. Only insert the plug into an outlet with protective
conductor terminal.
●Only use intact cables and route them carefully so that they cannot be dam-
aged. Check the power cables regularly to ensure that they are undamaged.
Also ensure that nobody can trip over loose cables.
●If the product needs an external power supply, use the power supply that is
delivered with the product or that is recommended in the product documenta-
tion or a power supply that conforms to the country-specific regulations.
●Only connect the product to a power source with a fuse protection of maxi-
mum 20 A.
●Ensure that you can disconnect the product from the power source at any
time. Pull the power plug to disconnect the product. The power plug must be
easily accessible. If the product is integrated into a system that does not meet
these requirements, provide an easily accessible circuit breaker at the system
level.
Cleaning the product
Use a dry, lint-free cloth to clean the product. When cleaning, keep in mind that
the casing is not waterproof. Do not use liquid cleaning agents.
Safety Instructions
Safety Information
R&S®EVSG1000
10Getting Started 1329.8721.02 ─ 04
Meaning of safety labels
Safety labels on the product warn against potential hazards.
Potential hazard
Read the product documentation to avoid personal injury or product damage.
Electrical hazard
Indicates live parts. Risk of electric shock, fire, personal injury or even death.
Hot surface
Do not touch. Risk of skin burns. Risk of fire.
Protective conductor terminal
Connect this terminal to a grounded external conductor or to protective ground. This
protects you against electric shock should an electric problem occur.
Handling batteries safely
The product contains lithium polymer or lithium ion cells or batteries. The use of
the word battery in the following always means all types. Only the battery con-
tents are potentially hazardous. As long as a battery is undamaged and the seals
remain intact, there is no danger.
Impact, shock or heat can cause damage such as dents, punctures and other
deformations. A damaged battery poses a risk of personal injury. Handle a dam-
aged or leaking battery with extreme care. Immediately ventilate the area since
the battery releases harmful gases. If you come into contact with the battery fluid,
immediately remove all contaminated clothing. Irritation can occur if the battery
fluid comes in contact with your skin or eyes. Immediately and thoroughly rinse
your skin or eyes with water and seek medical aid.
For safe handling, follow these rules:
●Do not short-circuit the battery.
●Do not mechanically damage the battery. Do not open or disassemble the bat-
tery.
●Do not expose the battery to high temperatures such as open flames, hot sur-
faces and sunlight.
●Only use the battery with the designated Rohde & Schwarz product.
●Only use the appropriate Rohde & Schwarz charger to charge the batteries. If
the batteries are improperly charged, there is a risk of explosion. For charging
and discharging temperature ranges, see the product documentation.
Safety Instructions
Otros manuales para EVSG1000
3
Tabla de contenidos
Otros manuales de Instrumento de medición de Rohde & Schwarz
Rohde & Schwarz
Rohde & Schwarz R&S RT-ZPR20 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz FPC1000 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz ZVH4 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz SMBV100B Manual de usuario
Rohde & Schwarz
Rohde & Schwarz FSVA3000 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz EVSG1000 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz FSMR Manual de usuario
Rohde & Schwarz
Rohde & Schwarz R&S FSWP Manual de usuario
Rohde & Schwarz
Rohde & Schwarz R&S CMW-KM5 Series Manual de usuario
Rohde & Schwarz
Rohde & Schwarz Spectrum Rider FPH Manual de usuario
Rohde & Schwarz
Rohde & Schwarz R&S DVMS1 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz RT-ZS10 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz R&S ZNL3 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz SGS100A Manual de usuario
Rohde & Schwarz
Rohde & Schwarz ZVL series Manual de usuario
Rohde & Schwarz
Rohde & Schwarz FPC1000 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz FSVA3000 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz ZVB 4 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz EVSF1000 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz Hameg HZ040 Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario