Rohde & Schwarz EVSF1000 Manual de usuario
R&S®EVSF1000
VHF/UHF Nav/Flight
Analyzer
Getting Started
Getting Started
Version 05
1178640402
(;ÜÎ42)
This document describes the following R&S EVSF1000 models with firmware ver-
sion 1.40 or later:
●R&S EVSF1000 (1330.0008.02)
Furthermore, it covers the following options:
●R&S EVSF1-B4 Slide-in option (1330.1404.02)
●R&S EVSF1-Z1 Tray (1330.1410.02)
●R&S EVSF1-Z2 Service adapter (1330.1427.02)
●R&S®EVSG1-K7 LF-Analysis (1329.9163.02)
© 2020 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Email: [email protected]
Internet: www.rohde-schwarz.com
Subject to change – data without tolerance limits is not binding.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
1178.6404.02 | Version 05 | R&S®EVSF1000
Throughout this manual, products from Rohde & Schwarz are indicated without the ® symbol , e.g.
R&S®EVSF1000 is indicated as R&S EVSF1000.
Contents
R&S®EVSF1000
3Getting Started 1178.6404.02 ─ 05
Contents
1 Safety Information................................................................. 5
2 Documentation Overview....................................................10
3 Key Features........................................................................ 12
4 Preparing for Use.................................................................13
5 Instrument Tour................................................................... 24
6 Operating Basics................................................................. 34
7 Contacting Customer Support........................................... 44
Index..................................................................................... 45
Contents
R&S®EVSF1000
4Getting Started 1178.6404.02 ─ 05
Safety Information
R&S®EVSF1000
5Getting Started 1178.6404.02 ─ 05
1 Safety Information
The product documentation helps you use the product safely and efficiently. Fol-
low the instructions provided here and in the Chapter 1.1, "Safety Instructions",
on page 5.
Intended use
The R&S EVSF1000 is a level and modulation analyzer intended for installation in
flight inspection aircraft. It performs measurements on ILS, VOR and marker bea-
con ground stations during startup, maintenance and servicing, and analyzes
ATC COM signals. The instrument’s mechanical and electrical design and high
sensitivity make it ideal for state-of-the-art flight inspection. In addition, the
R&S EVSF1000 performs specialized, drone-based measurements on terrestrial
navigation systems.
Use the product only for its designated purpose. Observe the operating conditions
and performance limits stated in the data sheet.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential
dangers and gives instructions on how to prevent personal injury or damage
caused by dangerous situations. Safety information is provided as follows:
●In Chapter 1.1, "Safety Instructions", on page 5. The same information is
provided in many languages as printed "Safety Instructions". The printed
"Safety Instructions" are delivered with the product.
●Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
1.1 Safety Instructions
Products from the Rohde & Schwarz group of companies are manufactured
according to the highest technical standards. To use the products safely, follow
the instructions provided here and in the product documentation. Keep the prod-
uct documentation nearby and offer it to other users.
Use the product only for its intended use and within its performance limits. Inten-
ded use and limits are described in the product documentation such as the data
Safety Instructions
Safety Information
R&S®EVSF1000
6Getting Started 1178.6404.02 ─ 05
sheet, manuals and the printed safety instructions. If you are unsure about the
appropriate use, contact Rohde & Schwarz customer service.
Using the product requires specialists or specially trained personnel. These users
also need sound knowledge of at least one of the languages in which the user
interfaces and the product documentation are available.
If any part of the product is damaged or broken, stop using the product. Never
open the casing of the product. Only service personnel authorized by
Rohde & Schwarz are allowed to repair the product. Contact Rohde & Schwarz
customer service at http://www.customersupport.rohde-schwarz.com.
Lifting and carrying the product
The maximum weight of the product is provided in the data sheet. To move the
product safely, you can use lifting or transporting equipment such as lift trucks
and forklifts. Follow the instructions provided by the equipment manufacturer.
Choosing the operating site
Only use the product indoors. The product casing is not waterproof. Water that
enters can electrically connect the casing with live parts, which can lead to elec-
tric shock, serious personal injury or death if you touch the casing. If
Rohde & Schwarz provides a carrying bag designed for your product, you can
use the product outdoors.
Unless otherwise specified, you can operate the product up to an altitude of
2000 m above sea level. The product is suitable for pollution degree 2 environ-
ments where nonconductive contamination can occur. For more information on
environmental conditions such as ambient temperature and humidity, see the
data sheet.
Setting up the product
Always place the product on a stable, flat and level surface with the bottom of the
product facing down. If the product is designed for different positions, secure the
product so that it cannot fall over.
If the product has foldable feet, always fold the feet completely in or out to ensure
stability. The feet can collapse if they are not folded out completely or if the prod-
uct is moved without lifting it. The foldable feet are designed to carry the weight of
the product, but not an extra load.
If stacking is possible, keep in mind that a stack of products can fall over and
cause injury.
Safety Instructions
Safety Information
R&S®EVSF1000
7Getting Started 1178.6404.02 ─ 05
If you mount products in a rack, ensure that the rack has sufficient load capacity
and stability. Observe the specifications of the rack manufacturer. Always install
the products from the bottom shelf to the top shelf so that the rack stands
securely. Secure the product so that it cannot fall off the rack.
Connecting to power
The product is an overvoltage category II product and has to be connected to a
fixed installation used to supply energy-consuming equipment such as household
appliances and similar loads. Be aware that electrically powered products have
risks, such as electric shock, fire, personal injury or even death.
Take the following measures for your safety:
●Before switching on the product, ensure that the voltage and frequency indica-
ted on the product match the available power source. If the power adapter
does not adjust automatically, set the correct value and check the rating of the
fuse.
●If a product has an exchangeable fuse, its type and characteristics are indica-
ted next to the fuse holder. Before changing the fuse, switch off the instrument
and disconnect it from the power source. How to change the fuse is described
in the product documentation.
●Only use the power cable delivered with the product. It complies with country-
specific safety requirements. Only insert the plug into an outlet with protective
conductor terminal.
●Only use intact cables and route them carefully so that they cannot be dam-
aged. Check the power cables regularly to ensure that they are undamaged.
Also ensure that nobody can trip over loose cables.
●If the product needs an external power supply, use the power supply that is
delivered with the product or that is recommended in the product documenta-
tion or a power supply that conforms to the country-specific regulations.
●Only connect the product to a power source with a fuse protection of maxi-
mum 20 A.
●Ensure that you can disconnect the product from the power source at any
time. Pull the power plug to disconnect the product. The power plug must be
easily accessible. If the product is integrated into a system that does not meet
these requirements, provide an easily accessible circuit breaker at the system
level.
Safety Instructions
Safety Information
R&S®EVSF1000
8Getting Started 1178.6404.02 ─ 05
Cleaning the product
Use a dry, lint-free cloth to clean the product. When cleaning, keep in mind that
the casing is not waterproof. Do not use liquid cleaning agents.
Meaning of safety labels
Safety labels on the product warn against potential hazards.
Potential hazard
Read the product documentation to avoid personal injury or product damage.
Electrical hazard
Indicates live parts. Risk of electric shock, fire, personal injury or even death.
Hot surface
Do not touch. Risk of skin burns. Risk of fire.
Protective conductor terminal
Connect this terminal to a grounded external conductor or to protective ground. This
protects you against electric shock should an electric problem occur.
Connecting headphones
Take the following measures to prevent hearing damage. Before using head-
phones, check the volume and reduce it if necessary. If you monitor varying sig-
nal levels, take off the headphones and wait until the signal has settled. Then
adjust the volume.
1.2 Labels on the Product
Labels on the casing inform about:
●Personal safety, see "Meaning of safety labels" on page 8
●Product and environment safety, see Table 1-1
Table 1-1: Labels regarding product and environment safety
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after
the product has come to the end of its service life.
For more information, see the R&S EVSF1000 user manual, chapter "Disposal".
Labels on the Product
Safety Information
R&S®EVSF1000
9Getting Started 1178.6404.02 ─ 05
1.3 Warning Messages in the Documentation
A warning message points out a risk or danger that you need to be aware of. The
signal word indicates the severity of the safety hazard and how likely it will occur
if you do not follow the safety precautions.
CAUTION
Potentially hazardous situation
Could result in minor or moderate injury if not avoided.
NOTICE
Potential risks of damage
Could result in damage to the supported product or to other property.
Warning Messages in the Documentation
Documentation Overview
R&S®EVSF1000
10Getting Started 1178.6404.02 ─ 05
2 Documentation Overview
This section provides an overview of the R&S EVSF1000 user documentation.
You find it on the product page at:
www.rohde-schwarz.com/manual/EVSF1000
2.1 Getting Started Manual
Introduces the R&S EVSF1000 and describes how to set up and start working
with the product. A printed version is delivered with the instrument.
2.2 User Manuals and Help
Contains the description of all instrument modes and functions. It also provides
an introduction to remote control, a complete description of the remote control
commands with programming examples, and information on maintenance, instru-
ment interfaces and error messages. Includes the contents of the getting started
manual.
The contents of the user manual are also available as online help on the
R&S EVSF1000.
2.3 Printed Safety Instructions
Provides safety information in many languages. The printed document is deliv-
ered with the product.
2.4 Data Sheets and Brochures
The data sheet contains the technical specifications of the R&S EVSF1000. It
also lists the firmware applications and their order numbers, and optional acces-
sories.
Data Sheets and Brochures
Otros manuales para EVSF1000
3
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Instrumento de medición de Rohde & Schwarz
Rohde & Schwarz
Rohde & Schwarz ZNA Manual de usuario
Rohde & Schwarz
Rohde & Schwarz FSH3 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz ZVT Series Manual de usuario
Rohde & Schwarz
Rohde & Schwarz VOR/ILS Analyzer EVS200 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz ZNA Series Manual de usuario
Rohde & Schwarz
Rohde & Schwarz FSW Series Manual de usuario
Rohde & Schwarz
Rohde & Schwarz ZNL Series Manual de usuario
Rohde & Schwarz
Rohde & Schwarz NRPM OTA Power Measurement Solution Manual de usuario
Rohde & Schwarz
Rohde & Schwarz HMS-X Manual de usuario
Rohde & Schwarz
Rohde & Schwarz ZPV Manual de usuario
Rohde & Schwarz
Rohde & Schwarz FSV Manual de usuario
Rohde & Schwarz
Rohde & Schwarz R&S UMS100 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz R&S RT-ZC10 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz RT-ZC20 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz R&SHMC8012 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz R&S ZNL3 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz HAMEG HZO41 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz RT-ZP05S Manual de usuario
Rohde & Schwarz
Rohde & Schwarz EVSG1000 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz ZVAX24 Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario