Robe Anolis Calumma XS MC Manual de usuario
V
er
sion 1.
8
QR code for user manual
Calumma XS
2
Table of contents
1. Safety instructions ...................................................................................................................................................... 3
2. Fixture exterior view ................................................................................................................................................... 5
3. Control and connection .............................................................................................................................................. 5
4. Installation .................................................................................................................................................................. 8
4.1 Mounting the fixture ............................................................................................................................................ 8
4.2 Connection to power ............................................................................................................................................ 9
5. Software update ....................................................................................................................................................... 14
6. Technical specifications ............................................................................................................................................ 16
7. Cleaning and maintenance ....................................................................................................................................... 19
7.1 Disposing of the product .................................................................................................................................... 19
8. ChangeLog ................................................................................................................................................................ 20
Calumma XS
3
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE POWERING OR INSTALLING YOUR Calumma !
Save it for future reference.
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure
safe operation, it is absolutely necessary for the user to follow the safety instructions and warnings written in this
manual.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual
or any unauthorized modification to the device.
Unauthorized modification will void warranty.
1. Safety instructions
DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT!
Always disconnect the fixture from power before cleaning, servicing or installing.
This fixture should be operated only from the type of power source indicated on the marking label. If you are not
sure of the type of power supplied, consult your authorized distributor or local power company.
Always disconnect the fixture from AC power before servicing or cleaning.
Make sure the power/data cable is not damaged by sharp edges.
Do not install the unit near an open flame.
Refer servicing to qualified service personnel.
Do not connect this fixture to a dimmer pack.
LED light emission. Risk of eye injury. Do not look into the beam from a short distance without suitable protective
eyewear. Do not look at LEDs with magnifiers or similar optical instruments that may concentrate the light
output.
The fixture was designed for outdoor use. This fixture must not be used for underwater installation.
When choosing the installation spot, please make sure that the fixture is not exposed to extreme heat or dust.
Avoid using the unit in locations subject to possible impacts.
The fixture body never must be covered with cloth or other materials when the fixture is under operation.
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened.
The fixture becomes hot during operation. Allow the fixture to cool approximately 30 minutes prior to servicing or
maintenance.
Please consider that unauthorized modifications on the fixture are forbidden due to safety reasons!
Please use the original packaging if the fixture is to be transported.
Calumma XS
4
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the warranty becomes void. Furthermore, any other operation may lead to dangers like short-circuit,
burns, electric shock etc.
The product (covers and cables) must not be exposed to a high frequency electromagnetic field higher than 3V/m.
Immunity of the equipment is designed according to the standard EN 55035 Electromagnetic compatibility of
multimedia equipment - Immunity requirements
Emission of the equipment complies with the standard EN55032 Electromagnetic compatibility of multimedia
equipment – Emission Requirements according to class B.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
The [Device] wireless operation is safe and complies to RF Exposure requirements.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning for fixtures with Harsh Environment Finish (HEF):
Handle with care!
Avoid any damage to the painted surface.
Damaging the paint may result in corrosion and loss of warranty.
Calumma XS
5
2. Fixture exterior view
3. Control and connection
The Calumma modules should be connected to the E-Box Remote or E-Box Remote basic via junction boxes.
The E-box Remote has to be switched to the Pass-Through mode.
Example of connection with E-box Remote
1. Transparent glass cover
2. Mounting yoke
3. Tilt adjusting lock
4. LED module with heat sink
Calumma XS
6
Example of connection with E-box Remote Basic
Note. Combination of Calummas XS and Emineres Remote is also possible.
Example:
From point of view of driver load (E-box Remote/E-box Remote Basic), max. number of Calummas connected to
one E-box Remote/E-box Remote Basic is 40 but Calummas XS have to be operated in the Pass-through mode, it
means that max. 32 Calummas XS can be connected in one string.
Max. number of Calummas XS connected to the E-box Remote/E-box Remote Basic also depends on cable length.
E-box Remote
Cable length *
Max
. n
umber of
Calumma
s
XS
50 m
25
per output, 40
in total
100 m
20
per output
, 40 in total
Calumma XS
7
E-box Remote Basic
Cable length *
Max. n
umber of
Calumma
s
XS
50 m
25
100 m
20
* Cable length is a total cable length between one output of the E-box Remote (E-box Remote Basic) and last
connected Calumma XS.
Example:
Total cable length(output 1)=L1+L2+L3+L4
Total cable length(output 2)=L5+L6+L7+L8+L9
Calumma XS
8
4. Installation
4.1 Mounting the fixture
The Calumma can be fastened in any orientation on a flat, non-flammable surface by means of mounting yoke (2).
The LED module (4) can be tilted +180°/-180°. Use an Allen key 2.5 for adjusting a LED module position.
Ensure that the structure to which you are attaching the fixture is secure.
Calumma XS
9
4.2 Connection to power
The unit must be installed by a qualified electrician in accordance with all national
and local electrical and construction codes and regulations.
Junction box installation
Junction box with one output
Junction box with four outputs
1.Unscrew the four screws (1) from the cover (2) on the junction box to get access to the DPS with terminal
blocks (3) and two mounting holes (4).
2. Screw the junction box on a non-flammable flat surface.
Calumma XS
10
3. Connect cables to terminal blocks.
Two cable glands M20 x 1.5 serves for a power/data cable. One (or four) cable gland M12 x 1.5 serves for Calumma
XS connection cable.
Remove the end cap from the cable gland before passing the cable.
We recommend to apply an adequate layer of the paste LOCTITE 5331 on the plastic holder of the cable gland
before inserting it into the body of the gland.
Cable gland M20x1.5 and M12x1.5
Wiring of connection blocks on DPS RB4232 in the junction box with one LED output.
Fuse F1: 2A/500V AC.
Otros manuales para Anolis Calumma XS MC
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Equipo de iluminación de Robe
Robe
Robe ClubWash 600 CT Manual de usuario
Robe
Robe Stage Banner 10 AT Series Manual de usuario
Robe
Robe Anolis Ambiane XP56 Manual de usuario
Robe
Robe ROBIN Pointe Manual de usuario
Robe
Robe Divine 160 RGBW Manual de usuario
Robe
Robe Scan 575 XT Manual de usuario
Robe
Robe ClubWash 250CT Manual de usuario
Robe
Robe Anolis Eminere Inground 2 Wireless DMX Manual de usuario
Robe
Robe Robin DL7S Profile Manual de usuario
Robe
Robe ColorWash 575E AT Manual de usuario
Robe
Robe Robin CycBar UV Manual de usuario
Robe
Robe Anolis Eminere 1 MC Manual de usuario
Robe
Robe Anolis UVinere Remote 1 Manual de usuario
Robe
Robe ANOLIS Eminere Side 1 Manual de usuario
Robe
Robe ROBIN iPointe65 Manual de usuario
Robe
Robe Calumma Classic M MC Manual de usuario
Robe
Robe Stage Faze 1500AT Manual de usuario
Robe
Robe ROBIN 300X Manual de usuario
Robe
Robe Robin 600E Beam Manual de usuario
Robe
Robe Color Wasf 1200E Manual de usuario
Manuales populares de Equipo de iluminación de otras marcas
Qazqa
Qazqa Suplux SL 3 Black 103062 Manual de usuario
Commercial Electric
Commercial Electric 54568141 Manual de usuario
CREE LIGHTING
CREE LIGHTING 304 Series Manual de usuario
Goobay
Goobay 49867 Manual de usuario
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Manual de usuario
Alkalite
Alkalite Krypton KT-81 Manual de usuario
