Robe Anolis Calumma S MC Manual de usuario

Version 1.

QR code for user manual

Calumma S

Table of contents

1. Safety instructions ...................................................................................................................................................... 3

2. Fixture exterior view ................................................................................................................................................... 5

3. Installation .................................................................................................................................................................. 5

3.1 Mounting the fixture ............................................................................................................................................ 5

3.2 Connection to mains ............................................................................................................................................. 8

4. Control and connection options ............................................................................................................................... 10

4.1 DMX or DALI........................................................................................................................................................ 10

4.2 Power On/Off ...................................................................................................................................................... 10

4.3 DMX or Ethernet via E-box ................................................................................................................................. 11

5. Software update ....................................................................................................................................................... 13

6. Technical specifications ............................................................................................................................................ 15

7. Cleaning and maintenance ....................................................................................................................................... 20

7.1 Disposing of the product .................................................................................................................................... 20

8. ChangeLog ................................................................................................................................................................ 20

Calumma S

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE POWERING OR INSTALLING YOUR Calumma !

Save it for future reference.

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure

safe operation, it is absolutely necessary for the user to follow the safety instructions and warnings written in this

manual.

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual

or any unauthorized modification to the device.

Unauthorized modification will void warranty.

1. Safety instructions

DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT!

This fixture should be operated only from the type of power source indicated on the marking label. If you are not

sure of the type of power supplied, consult your authorized distributor or local power company.

Always disconnect the fixture from AC power before servicing or cleaning.

Make sure the power/data cable is not damaged by sharp edges.

Do not install the unit near an open flame.

Refer servicing to qualified service personnel.

This fixture falls under protection class I. Therefore this fixture has to be connected to a mains socket outlet with

a protective earthing connection.

Do not connect this fixture to a dimmer pack.

LED light emission. Risk of eye injury. Do not look into the beam from a short distance without suitable protective

eyewear. Do not look at LEDs with magnifiers or similar optical instruments that may concentrate the light

output.

The fixture was designed for outdoor use. This fixture must not be used for underwater installation.

When choosing the installation spot, please make sure that the fixture is not exposed to extreme heat or dust.

Avoid using the unit in locations subject to possible impacts.

The fixture body never must be covered with cloth or other materials when the fixture is under operation.

Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened.

The fixture becomes hot during operation. Allow the fixture to cool approximately 30 minutes prior to servicing or

maintenance.

Please consider that unauthorized modifications on the fixture are forbidden due to safety reasons!

Calumma S

Please use the original packaging if the fixture is to be transported.

If this device will be operated in any way different to the one described in this manual, the product may suffer

damages and the warranty becomes void. Furthermore, any other operation may lead to dangers like short-circuit,

burns, electric shock etc.

The product (covers and cables) must not be exposed to a high frequency electromagnetic field higher than 3V/m.

Immunity of the equipment is designed according to the standard EN 55035 Electromagnetic compatibility of

multimedia equipment - Immunity requirements

Emission of the equipment complies with the standard EN55032 Electromagnetic compatibility of multimedia

equipment – Emission Requirements according to class B.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

The [Device] wireless operation is safe and complies to RF Exposure requirements.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Warning for fixtures with Harsh Environment Finish (HEF):

Handle with care!

Avoid any damage to the painted surface.

Damaging the paint may result in corrosion and loss of warranty.

Calumma S

2. Fixture exterior view

3. Installation

3.1 Mounting the fixture

The Calumma S can be fastened in any orientation on a flat, non-flammable surface by means of mounting yoke

(2).

The LED module (4) can be tilted +180°/-180°. Use an Allen key 2.5 for adjusting a LED module position.

Ensure that the structure to which you are attaching the fixture is secure.

1. Transparent glass cover

2. Mounting yoke

3. Tilt adjusting lock

4. LED module with heat sink

Calumma S

Mounting the fixture via the pole clamp adaptor

The pole clamp adaptor serves as a fastening element for Calumma S on a pole of diameter of 76-116mm or on the

flat pole. The Calumma S has to be equipped with a modified mounting yoke (P/N 11418772 ) intended for this way

of installation.

The pole clamp adaptor set includes: 1x pole clamp adaptor, 1x rubber cable gland, 3x Allen screw M8x20, 3x flat

washer, 3x spring washer, 2x tube spacer.

1. The pole clamp adaptor can be screwed on the pole by means of two screws or fixed by means of

a steel clamping tape (max. width of tape=20mm).

If you use two screws for fastening the pole clamp adaptor on the pole, drill two holes (1) for fastening the

pole clamp adaptor on the pole. Diameter of holes depends on material of pole and used screws. Be sure

that fastening of the pole clamp adaptor is secure to keep weight of Calumma.

2. Drill the hole (2) for rubber cable gland (diameter of hole=20mm, max. thickness of pole wall= 3.2mm),

make drilled hole edges clean (without burrs) and insert the rubber gland into the hole.

Calumma S

3. Screw the pole clamp adaptor (4) on the pole by means of two screws (5) with spring washers or use a

steel clamping tape for fastening the pole clamp adaptor on the pole.

In case of screwing the pole clamp adaptor (7) on a flat surface (pole), two pole spacers have to be inserted

under two mounting holes of the pole clamp adaptor (on fastening screws (5)) to fill up space between

the pole and the pole clamp adaptor

4. Pass the Calumma cable (6) through mounting yoke (7), pole clamp adaptor (4) and through cable gland (2)

into the pole.

5. Screw the Calumma mounting yoke (7) on the pole clamp adaptor (4) by means of three Allen screws

M8x20 (3) with washers (Allen screw + spring washer+ flat washer). Keep correct orientation of the

fastening screws (3) as drawn on the picture – two screws (B) have to aim upwards, one screw has to be

orientated towards ground.

NOTE. Three mounting openings in the mounting yoke allow positioning of the mounting yoke in range of

0°- 360°.

Calumma S

3.2 Connection to mains

The unit must be installed by a qualified electrician in accordance with all national

and local electrical and construction codes and regulations.

This device falls under class one and must be grounded!

The Calumma is equipped with auto-switching power supply that automatically adjusts to any 50/60Hz AC power

source from 120-277 Volts.

3.2.1 Junction box installation

The junction box box falls under protection class I . Therefore, every junction box

has to be connected to a mains socket outlet with a protective earthing connection.

1.Unscrew the four screws (1) from the cover (2) on the junction box to get access to the terminal block (3) and

two mounting holes of diameter of 4.6 mm (4).

2. Screw the junction box on a non-flammable flat surface.

3. Connect cables.

The cable gland M20 x 1.5 with a standard seal serves for a cable of diameter of 7-13mm, for smaller diameter of

cable (4-8mm) you have to remove the original seal from the cable gland M20x1.5 and use the enclosed reducing

seal instead of it. The reducing seal for diameter of cable 4-8mm (P/N 13051388) is enclosed in the Junction box.

Remove the end cap from the cable gland before passing the cable.

We recommend to apply an adequate layer of the paste LOCTITE 5331 on the plastic holder of the cable gland

before inserting it into the body of the gland.

Calumma S

Cable gland M20x1.5:

4. Screw the cover (2) back on the junction box.

Calumma S

4. Control and connection options

4.1 DMX or DALI

Example

DMX connection (CE)

IF the 5-cored cable Flamar 3x AWG 16 + 1x (2x AWG 24), (P/N 1305 1508) is used for Calumma connection and

connection among junction boxes:

Core

Connection

Core

Connection

Black

Live

(L)

Red

Data + (+)

Blue

Neutral

(N)

White

Data

–

(

)

Yellow/Green

GND

Shielding

Data ground (0V)

Up to 32 Calummas can be connected in DMX chain.

DALI connection

IF the 5-cored cable SJTW 5x 14AWG (P/N 1305 3336) is used for Calumma connection and connection among

junction boxes:

Core

Connection

Core

Connection

Black

Live

(L)

Red

Data

White

Neutral

(N)

Orange

Data

Yellow/Green

GND

Up to 64 Calummas can be connected in DALI network.

4.2 Power On/Off

Note: This type of connection is available for SC (single chip) version only. Non dimmable.

Otros manuales para Anolis Calumma S MC

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de iluminación de Robe

Robe

Robe Anolis Eminere 1 Manual de usuario

Robe

Robe Robin DL4F Wash Manual de usuario

Robe

Robe COLORSPOT 170 AT Manual de usuario

Robe

Robe Robin 600 Purewhite WIreless DMX Manual de usuario

Robe

Robe Euphoria CB series Manual de usuario

Robe

Robe Robin 600E Beam Manual de usuario

Robe

Robe Color Spot250AT Manual de usuario

Robe

Robe DT Series Manual de usuario

Robe

Robe ColorSpot 700E AT Manual de usuario

Robe

Robe Anolis ArcDot-US Manual de usuario

Robe

Robe ClubWash 600 CT Manual de usuario

Robe

Robe Robin Esprite Manual de usuario

Robe

Robe XT Series Manual de usuario

Robe

Robe Color Sport 1200 Profile Manual de usuario

Robe

Robe Wash 575XT Manual de usuario

Robe

Robe Robin 100 LEDBeam Wireless DMX CRMX Manual de usuario

Robe

Robe Anolis ArcSource Outdoor 24 MC Integral RGBW Manual de usuario

Robe

Robe Anolis Ambiane XP56 Manual de usuario

Robe

Robe Robin BMFL FollowSpot Manual de usuario

Robe

Robe Stage Banner 10 AT Series Manual de usuario

Robe

Robe LightDome 575 Manual de usuario

Robe

Robe ColorSpot 250 AT Manual de usuario

Robe

Robe Robin MiniMe Manual de usuario

Robe

Robe Color Wash 700E AT Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario