Robe ANOLiS ArcSource Submersible II Manual de usuario

Version 1.4

ArcSource Submersible II

Table of contents

1. Introduction .................................................................................................................... 3

2. Safety information.......................................................................................................... 3

3. Mounting ......................................................................................................................... 3

4. ArcSource Submersible II connection with a control unit.......................................... 4

5. Technical specications ................................................................................................ 5

6. Mounting the ArcSource Submersible II into the installation sleeve ........................ 7

7. Cleaning and maintenance ........................................................................................... 7

1. Introduction

The ArcSource Submersible II has a housing crafted from the highest quality marine grade bronze meaning its

is capable to withstand the very harshest environmental conditions. The ArcSource Submersible II can easily

operate constantly submersed up to 10 m and o󰀨ers more than 10 di󰀨erent beam options for positioning free-

dom.

2. Safety information

The unit must be installed by a qualied electrician in accordance with all national

and local electrical and construction codes and regulations.

The persons who are in charge of installation should have the required qualications for this

type of work

Avoid using the unit in locations subject to possible impacts.

The unit is intended only for permanent underwater installation up to depth of 10 m.

Do not let the unit in frozen water.

All service works have to be done in a dry environment (e.g. in a workshop).

Avoid looking directly into the LED light beam at close range.

Immunity of the equipment is designed for electromagnetic environments E1, E2, E3 according to

the standard EN55103-2 ed.2 Electromagnetic compatibility. Product family standard for audio, video,

audiovisual and entertainment lighting control apparatus for professional use. Part 2: Immunity.

The product (covers and cables) must not be exposed to a high frequency electromagnetic eld higher

than 3V/m.

The installation company should check levels of possible interferences above the tested levels E1,E2,E3 given

by this standard (e.g. transmitters in surrounding area) before installing the equipment.

Emission of the equipment complies with the standard EN55032 Electromagnetic compatibility of multimedia

equipment – Emission Requirements according to class B.

3. Mounting

The ArcSource Submersible II can be arranged in any position orientation. The LED module body is mounted

on a bronze bracket for tilt adjustment . Use the Allen key no.6 to adjust desired tilt position of the LED module

by means of two tilt locks (1). For fastening the ArcSource Submersible II to the at surface use either three

holes or two semicircle slots which allows ne adjusting the xture in a pan direction.

Wiring of the ArcSource Submersible II:

Wire Red wire Blue wire Orange wire

Function +24V Ground Communication

4. ArcSource Submersible II connection with a control unit

Maximum cable length between the ArcSource Submersible II and the SubDrive 1

(Subdrive 4) depends on the operating mode:

Minimum mode: 100 m

Medium mode: 50 m

Maximum mode: 25 m

Example of connection:

5. Technical specications

ELECTRICAL

Input voltage :24 V DC

Typical Power Consumption: 35 W (@ 350 mA), 70 W (@ 700 mA), 100 W (@ 1000 mA)

Max. Input Current: 1000 mA (max. per channel)

OPTICAL

Light Source: 6 x 15 W Multichip LED

Colour Variants: RGBW (W - 6500 K), RGBA, PW (W - 3000 K)

Beam Angle:

Symmetrical: 7°, 13°, 20°, 30°, 40°, 60°, 90°

Bi-symmetrical: 7° x 30°, 30° x 7°, 7° x 60°, 60° x 7°, 35° x 70°, 70° x 35°, 10° x 90°, 90° x 10°

Projected Lumen Maintenance: 60.000 hrs (L70 @ 25 °C / 77 °F)

CONTROL

Compatible drivers: SubDrive 1, SubDrive 4

PHYSICAL

Weight: 9.5 kg / 20.9 lbs

Housing: Marine Bronze, Tempered Glass

Connection: Cable Submersible PBS-USE 3x1.5 mm2 (CE), Cable Submersible L0390 (US)

Mounting Method: Yoke, Floor Stand (optional)

Adjustability: +35°/ -90°

Protection factor: IP68 10m rating (CE), maximum depth of 10 m (US)

IK Rating: IK10

Cooling System: Convection

Operating Ambient Temperature: +1 °C / +45 °C (34 °F / +113 °F )

Operating Temperature: +55 °C @ Ambient +45 °C (+131 °F @ Ambient +113 °F )

OPTIONAL ACCESSORIES

SubDrive 1

SubDrive 4

Wallmount installation sleeve (P/N 10980285)

Floor Stand ArcSource 24 MC Submersible 5mm (P/N10980315)

INCLUDED ITEMS

ArcSource Submersible II

User manual

DIMENSIONS

mm [inch]

ArcSource Submersible II

Installation sleeve

6. Mounting the ArcSource Submersible II into the wallmount

installation sleeve

1. Unscrew the bracket from the ArcSource Submersible II.

2. Insert the ArcSource Submersible II (4) into chassis (5) and fasten it on both sides it by means of two

bolts (7) with rubber washers (6), 6 mm long spacers ( 10) and nuts M8 (9). These parts (6,7,9,10) are

components of the wallmount installation sleeve (8).

3. Insert Allen bolts M5x45 (1) with spring washers (2) to the 30mm spacers (3) and used them to screw

the chassis (5) to the installation sleeve (8) (before inserting chassis, pull the ArcSource Submersible II´s

cable through the aperture in the wallmount installation sleeve.

4. Screw the metal collar (13) to the chassis (5) with two Allen keys M4x12 (11) and washers (12).

5. Insert the at rubber gasket (14) into metal collar (13).

6. Put the glass (15) on the rubber gasket (14).

7. Put the shaped rubber gasket (16) on the glass (15).

8. Screw the top metal ange (17) by means of the six at head screws M6x30 (18) to the wallmount installation

sleeve.

9. Connect the ArcSource Submersible II to the SubDrive 1 (SubDrive 4).

7. Cleaning and maintenance

Disconnect from the mains before starting any maintenance work

Maintenance and service operations are only to be carried out by a qualied person.

Should you need any spare parts, please use genuine parts.

June 14, 2021

All Specications subject to change without notice

Made in CZECH REPUBLIC by ROBE LIGHTING s.r.o. Palackeho 416/20 CZ 75701 Valasske Mezirici

Tabla de contenidos

Otros manuales de Equipo de iluminación de Robe

Robe

Robe Calumma Classic M MC Manual de usuario

Robe

Robe Anolis ArcSource Outdoor 48 MC Integral RGBW Manual de usuario

Robe

Robe Colormix 240 AT Manual de usuario

Robe

Robe Robin DL7S Profile Manual de usuario

Robe

Robe Robin 600E Beam Manual de usuario

Robe

Robe Robin Actor 3 Smart White Manual de usuario

Robe

Robe ColorWash 575E AT Manual de usuario

Robe

Robe Esprite Fresnel Manual de usuario

Robe

Robe Scan 575 XT Manual de usuario

Robe

Robe SPOT 250 XT Manual de usuario

Robe

Robe Anolis Eminere 1 MC Manual de usuario

Robe

Robe Digital Spot 3000 DT II Manual de usuario

Robe

Robe ANOLIS Manual de usuario

Robe

Robe XT Series Manual de usuario

Robe

Robe Robin MMX Blade Manual de usuario

Robe

Robe Anolis Eminere 1 Manual de usuario

Robe

Robe Led Blinder 196 LT Manual de usuario

Robe

Robe Color Wasf 1200E Manual de usuario

Robe

Robe Anolis Eminere Inground 2 Wireless DMX Manual de usuario

Robe

Robe Anolis Ambiane XP56 Manual de usuario

Robe

Robe PATT 2013 Manual de usuario

Robe

Robe REDBLINDER 2-48 Manual de usuario

Robe

Robe Robin DL4F Wash Manual de usuario

Robe

Robe Euphoria CB series Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario