Robe Anolis Calumma Remote M MC Manual de usuario

Version 1.

QR code for user manual

Calumma Remote M

Table of contents

1. Safety instructions ...................................................................................................................................................... 3

2. Fixture exterior view ................................................................................................................................................... 5

3. Control and connection .............................................................................................................................................. 5

4. Installation .................................................................................................................................................................. 8

4.1 Mounting the fixture ............................................................................................................................................ 8

4.2 Connection to power .......................................................................................................................................... 10

4.3 Top hat installation ............................................................................................................................................. 14

4.4 Half top hat installation ...................................................................................................................................... 15

5. Software update ....................................................................................................................................................... 16

6. Technical specifications ............................................................................................................................................ 18

7. Cleaning and maintenance ....................................................................................................................................... 22

7.1 Disposing of the product .................................................................................................................................... 22

8. ChangeLog ................................................................................................................................................................ 22

Calumma Remote M

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE POWERING OR INSTALLING YOUR Calumma Remote M !

Save it for future reference.

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure

safe operation, it is absolutely necessary for the user to follow the safety instructions and warnings written in this

manual.

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual

or any unauthorized modification to the device.

Unauthorized modification will void warranty.

1. Safety instructions

DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT!

This fixture should be operated only from the type of power source indicated on the marking label. If you are not

sure of the type of power supplied, consult your authorized distributor or local power company.

Always disconnect the fixture from AC power before servicing or cleaning.

Make sure the power/data cable is not damaged by sharp edges.

Do not install the unit near an open flame.

Refer servicing to qualified service personnel.

Do not connect this fixture to a dimmer pack.

LED light emission. Risk of eye injury. Do not look into the beam from a short distance without suitable protective

eyewear. Do not look at LEDs with magnifiers or similar optical instruments that may concentrate the light

output.

The fixture was designed for outdoor use. This fixture must not be used for underwater installation.

When choosing the installation spot, please make sure that the fixture is not exposed to extreme heat or dust.

Avoid using the unit in locations subject to possible impacts.

The fixture body never must be covered with cloth or other materials when the fixture is under operation.

Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened.

The fixture becomes hot during operation. Allow the fixture to cool approximately 30 minutes prior to servicing or

maintenance.

Operate the fixture only after having familiarized yourself with its functions. Do not permit operation by persons

not qualified to operate the fixture. Most damages are the result of unprofessional operation!

Please consider that unauthorized modifications on the fixture are forbidden due to safety reasons!

Calumma Remote M

Please use the original packaging if the fixture is to be transported.

If this device will be operated in any way different to the one described in this manual, the product may suffer

damages and the warranty becomes void. Furthermore, any other operation may lead to dangers like short-circuit,

burns, electric shock etc.

The product (covers and cables) must not be exposed to a high frequency electromagnetic field higher than 3V/m.

Immunity of the equipment is designed according to the standard EN 55035 Electromagnetic compatibility of

multimedia equipment - Immunity requirements

Emission of the equipment complies with the standard EN55032 Electromagnetic compatibility of multimedia

equipment – Emission Requirements according to class B.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

The [Device] wireless operation is safe and complies to RF Exposure requirements.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Warning for fixtures with Harsh Environment Finish (HEF):

Handle with care!

Avoid any damage to the painted surface.

Damaging the paint may result in corrosion and loss of warranty.

Calumma Remote M

2. Fixture exterior view

3. Control and connection

The Calumma Remote M modules should be connected to the E-Box Remote or E-Box Remote basic via junction

boxes.

The E-box Remote has to be switched to the Pass-Through mode.

Example of connection with E-box Remote

1. Transparent glass cover

2. Mounting yoke

3. Tilt adjusting lock

4. LED module with heat sink

Calumma Remote M

Example of connection with E-box Remote Basic

Note. Combination of Calummas Remote M and Emineres Remote is also possible.

Example:

Max. number of Calummas Remote M connected to the E-box Remote/E-box Remote Basic depends on cable

length.

E-box Remote/E-box Remote Basic

Cable length *

Max. number of Calummas

Remote M

SC/Calummas Remote M

25 m

50 m

100 m

Calumma Remote M

* Cable length is a total cable length on both outputs of the E-box Remote (E-box Remote Basic).

Example:

Total cable length (output 1+output 2)=L1+L2+L3+L4+L5+L6+L7+L8+L9

Max. number of Calummas Remote M SC/MC connected to the one output of the E-box Remote/E-box Remote

Basic is 5.

Calumma Remote M

4. Installation

4.1 Mounting the fixture

The Calumma Remote M can be fastened in any orientation on a flat, non-flammable surface by means of

mounting yoke (2).

The LED module (4) can be tilted +180°/-180°. Use an Allen key 2.5 for adjusting a LED module position.

Ensure that the structure to which you are attaching the fixture is secure.

Mounting the fixture via the pole clamp adaptor

The pole clamp adaptor serves as a fastening element for Calumma Remote M on a pole of diameter of 76-116mm

or on the flat pole. The Calumma Remote M has to be equipped with a modified mounting yoke (P/N 11418769 )

intended for this way of installation.

The pole clamp adaptor set includes: 1x pole clamp adaptor, 1x rubber cable gland, 3x Allen screw M8x20, 3x flat

washer, 3x spring washer, 2x tube spacer.

1. The pole clamp adaptor can be screwed on the pole by means of two screws or fixed by means of

a steel clamping tape (max. width of tape=20mm).

Calumma Remote M

If you use two screws for fastening the pole clamp adaptor on the pole, drill two holes (1) for fastening the

pole clamp adaptor on the pole. Diameter of holes depends on material of pole and used screws. Be sure

that fastening of the pole clamp adaptor is secure to keep weight of Calumma remote M.

2. Drill the hole (2) for rubber cable gland (diameter of hole=20mm, max. thickness of pole wall= 3.2mm),

make drilled hole edges clean (without burrs) and insert the rubber gland into the hole.

3. Screw the pole clamp adaptor (4) on the pole by means of two screws (5) with spring washers or use a

steel clamping tape for fastening the pole clamp adaptor on the pole.

In case of screwing the pole clamp adaptor (7) on a flat surface (pole), two pole spacers have to be inserted

under two mounting holes of the pole clamp adaptor (on fastening screws (5)) to fill up space between

the pole and the pole clamp adaptor

4. Pass the Calumma Remote M cable (6) through mounting yoke (7), pole clamp adaptor (4) and through

cable gland (2) into the pole.

5. Screw the Calumma Remote M mounting yoke (7) on the pole clamp adaptor (4) by means of three Allen

screws M8x20 (3) with washers (Allen screw + spring washer+ flat washer). Keep correct orientation of the

fastening screws (3) as drawn on the picture – two screws (B) have to aim upwards, one screw has to be

orientated towards ground.

NOTE. Three mounting openings in the mounting yoke allow positioning of the mounting yoke.

Calumma Remote M

4.2 Connection to power

The unit must be installed by a qualified electrician in accordance with all national

and local electrical and construction codes and regulations.

3.2.1 Junction box installation

Junction box with one output

Junction box with four outputs

1.Unscrew the four screws (1) from the cover (2) on the junction box to get access to the DPS with terminal

blocks (3) and two mounting holes (4).

2. Screw the junction box on a non-flammable flat surface.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de DJ de Robe

Robe

Robe Spot 575 XT Manual de usuario

Robe

Robe ROBIN colorstrobe lite Manual de usuario

Robe

Robe POINTE 280 Manual de usuario

Robe

Robe ROBIN BMFL LightMaster Side Manual de usuario

Robe

Robe redwash 3-192 Manual de usuario

Robe

Robe Robin SuperSpike Manual de usuario

Robe

Robe ROBIN ParFect 100 SmartWhite Manual de usuario

Robe

Robe ColorWash 250 AT Manual de usuario

Robe

Robe ROBIN ParFect 150 TW Manual de usuario

Robe

Robe iSpiider Manual de usuario

Robe

Robe REDpower 1-72 Manual de usuario

Robe

Robe ROBIN SPIKIE Manual de usuario

Robe

Robe Robin MMX Blade Manual de usuario

Robe

Robe pixelPATT Manual de usuario

Robe

Robe Robin DL7F Manual de usuario

Robe

Robe ROBIN UV Strobe Manual de usuario

Robe

Robe Anolis Eminere 1 Manual de usuario

Robe

Robe ColorSpot 2500E AT Manual de usuario

Robe

Robe Strobe IP Manual de usuario

Robe

Robe Painte Manual de usuario

Robe

Robe ROBIN iBeam 250 Manual de usuario

Robe

Robe Anolis Calumma XL MC Manual de usuario

Robe

Robe Robin LedBeam 150 Manual de usuario

Robe

Robe ROBIN iParfect 150 RGBA Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario