Rinnai RHFE-309FT Hoja de especificaciones
Operation and Installation Manual
NOT INTENDED FOR FIREPLACE INSERT.
Appliance must be installed with a Rinnai supplied ue system. For ueing installation
details refer to separate instructions.
Appliance must be installed, commissioned and serviced by a licensed tradesperson in
accordance with these instructions and all applicable local rules and regulations.
Owner, please retain this manual for future reference.
Approved by the Asthma and
Respiratory Foundation
Energysavers®
RHFE-309FT and RHFE-559FT
LIMITED WARRANTY
Please keep these instructions in a safe place for future reference.
RECORD AND ATTACH YOUR PROOF OF PURCHASE BELOW:
Your Retailer:__________________________________________________
Name:________________________________________________________
Address:______________________________________________________
_____________________________________________________________
Telephone:( _______ ) __________________________________________
Date of Purchase: ______ / ______ / _________
TERMS AND CONDITIONS
1. During the 24 month period from date of
purchase and subject to clauses 2 and
3 below, Rinnai New Zealand Limited
(“Rinnai”) will, at its own discretion, either
replace or repair any defective product at
no charge to the customer.
2. This warranty covers manufacturing defects
only. This warranty will not apply if (for
example) the product has been improperly
installed or is otherwise installed contrary
to manufacturer’s recommendations, has
been damaged during or after installation,
has not been operated in accordance
with operating instructions, or has been
subjected to damage or abuse beyond that
expected from conditions of normal use.
3. Warranty claims may be invalid if not
accompanied by details of the installing or
supervising gas tter’s registration number
and the gas tting certication number.
4. This warranty commences from the date of
purchase. Proof of purchase is required at
the time of any warranty claim.
5. Servicing of the product is to be carried out
by a Rinnai authorised service centre.
All Rinnai appliances meet or exceed the
safety standards required by New Zealand
gas and electrical regulations. The company
is constantly improving its products and as
such specications are subject to change or
variation without notice.
Rinnai brings you peace of mind
with a 2 year minimum warranty.
Contents
WARNING
Improper installation, adjustment, alteration, service or maintenance
can cause property damage, personal injury or loss of life.
For assistance or additional information contact Rinnai on
0800 RINNAI (0800 746 624).
Customer Information
About your Energysaver®4
Safety 7
General information 9
Heater operation 11
Setting the clock and timers 13
Operating the timers 14
Operation: Other features 15
Care of your Energysaver®16
Error code messages 17
Troubleshooting 18
Installer Information 20
Specication 21
Dimensions 22
Positioning, gas and electrical supply 23
Flueing: General 24
Flueing: Installation congurations 26
Energysaver® installation 28
Installer details 30
Wiring diagram 31
Rinnai New Zealand Energysaver®Operation and Installation Manual:
RHFE-309FT and RHFE-559FT (01-10)
4
About your Energysaver®
RHFE-309FT RHFE-559FT
Input: 13 MJ/h (on high) 23 MJ/h (on high)
Output: 3 kW 5 kW
Efciency: 80% 81%
Energy Star Rating: 4.3 stars 4.5 stars
Note: Figures may vary slightly depending on gas type and ue conguration.
At Rinnai, we’re committed to a positive future for New Zealand and our customers. Our high
efciency Energysaver® range not only ensures a warm home, but a healthy home.
Rinnai Energysavers are simple to operate, the layout below highlights where some of the
key components are positioned. The general layout of the Energysaver®models are the same
regardless of model, the model show below is the RHFE-559FT.
Bottom trim, pulls off
to allow lling of the
humidier tray
Louvre, warm air
discharge
Air lter (not pictured)
Control panel is centrally positioned
on top of the Energysaver®
Rear panel (not
pictured) covers
air inlet tube and
other operational
components
Rinnai New Zealand Energysaver®Operation and Installation Manual:
RHFE-309FT and RHFE-559FT (01-10)
5
About your Energysaver®
Features
Push button ignition Only one-touch is required to turn the heater on and off.
Child lock function Prevents children from altering settings when the heater is in use or activating
the heater when turned off.
Preheat This function will automatically operate the appliance before the programmed
start time in order to preheat the room.
Economy mode Energy saving feature designed to control the room temperature and prevent
the room from overheating.
Override Temporarily changes the heater operation from on to off, or vice versa, until the
next programmed setting is reached.
Dual timer Allows you to program the appliance to come on for two separate periods each
day, one in the morning and one in the evening. The dual timer feature means
you can “set and forget” your heater.
Filter indicator When the air (fan) lter becomes covered with dust the lter indicator will ash
indicating that cleaning is necessary.
Humidier tray Raise humidity in the room for extra comfort with the humidier tray—can be
lled with water as required.
Safety devices
Overheat switch This device automatically cuts the gas off if the heater exceeds a certain
temperature. This is normally caused by an obstruction in front of the louvres,
or a blocked fan lter. If this switch operates, turn the unit off, remove
obstruction (clean lters) and let the unit cool before restarting.
Fusible link Back up to the overheat switch. If a fusible link cuts off the gas a service call is
required to repair the appliance and replace the link.
Flame failure device If the ame goes out during operation, this device cuts off the unit (lockout). To
reset, turn the unit off, then on again. If this happens repeatedly a service call
is required.
Electrical fuse The electrical circuits are protected by an electric fuse. When the fuse blows,
the heater will not operate. A service call is required as the fuse needs to be
replaced.
Power failure In the event of a power failure or power cut, the gas valves will automatically
close. After the power is reinstated the appliance will automatically restart. The
time of day will need to be reset to the current time.
Rinnai New Zealand Energysaver®Operation and Installation Manual:
RHFE-309FT and RHFE-559FT (01-10)
6
About your Energysaver®
Control panel layout (both models)
Main switch for turning 'ON / OFF'.
'ON' / 'OFF' BUTTON
1
Selects clock and/or Timers for
adjusting or programming.
SET TIMES BUTTON
2
POWER ON /COMBUSTION
INDICATOR
9
Indicates that clock or dual timer
programme is being set.
CLOCK ADJUSTMENT &
TIMER INDICATORS
Indicates that the filter needs cleaning.
FILTER INDICATOR
10
Increases or decreases the temperature
setting as well as changing hours or
minutes
Indicates that the appliance is turned ON
and whether the burner is alight.
TIME / TEMP ADJUSTMENT
BUTTON
34
Temporarily changes operation from
ON to OFF or OFF to ON, until next
programmed setting is reached.
OVERRIDE BUTTON
Selects operating mode for
Timers 1 & 2 period.
ON TIMER BUTTON
5
Locks all controls when pressed.
(EXCEPT OFF)
CHILD LOCK BUTTON
78
6
Selects energy saving function
ECONOMY BUTTON
Indicates that the override function
is activated.
OVERRIDE INDICATOR
12
Shows either the time of day,
temperatures, or coded error message
TIME / TEMP DISPLAY
11
Indicates Child lock is activated.
CHILD LOCK
INDICATOR
15
123
75
8
15
9
13 12
14 11 10
64
Indicates that Timer 1 or Timer 2 has
been selected to operate.
TIMER INDICATOR
13 14 ECONOMY INDICATOR
Indicates that the Economy mode is
in operation.
Rinnai New Zealand Energysaver®Operation and Installation Manual:
RHFE-309FT and RHFE-559FT (01-10)
7
Safety
General safety
NOT TO BE CONNECTED TO AN LPG GAS CYLINDER LOCATED INDOORS
DO NOT PLACE ARTICLES ON OR AGAINST THIS APPLIANCE
DO NOT USE OR STORE FLAMMABLE MATERIALS NEAR THIS APPLIANCE
DO NOT MODIFY THIS APPLIANCE
DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN
OPERATION
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instructions concerning the use of this appliance by a person responsible
for their safety.
This heater must not be located directly below a power socket outlet (potential re hazard).
•
•
•
•
•
Do not allow
anyone to post
articles through
into the heater.
Children should
be supervised
at all times to
ensure they do
not play with
the heater.
Hand or body
contact with the
heater must be
avoided.
Do not allow
anyone to sit,
lean or sleep
directly in front
of the heater.
Do not cover or
place articles on
or against the
heater. It must
not be used for
any purpose
other than
heating.
Always turn the
heater OFF after
use.
Keep the heater
away from
ammable
materials.
Do not allow curtains
or other combustible
materials to come
into contact with the
appliance.
Rinnai New Zealand Energysaver®Operation and Installation Manual:
RHFE-309FT and RHFE-559FT (01-10)
8
Safety
Do not spray
aerosols while
the appliance is
operating. Most
contain butane
gas which can
be a re hazard
if used near the
appliance.
Do not restrict
the warm air
discharge
by placing
articles
directly in
front of the
heater.
Do not unplug
the heater
while it is still
in use or while
the fan is on.
Do not turn
the heater OFF
by unplugging
it from the wall.
Keep ammable
materials, trees
shrubs etc. away
from ue terminal.
Areas subject to
heavy snow―keep
snow clear of the
flue terminal.
A dedicated 240 V
10 Amp power point
must be used with
this heater. Do not
use double adaptors
to operate this
appliance.
Do not place
containers of
liquid on top of
the heater. Liquid
spillage can cause
extensive damage
to the heater and
may result in
electric shock.
This heater
must not be
built-in. The
clearances
shown
must be
maintained
(including
curtains).
250mm
1000 mm
50mm50 mm
TOP
FRONT
LEFT SIDE RIGHT SIDE
Rinnai New Zealand Energysaver®Operation and Installation Manual:
RHFE-309FT and RHFE-559FT (01-10)
9
General information
Before operation
Read these instructions to get an overview of how to operate, maintain and service your
Rinnai Energysaver®.
Filters
During peak operating periods the lters should be cleaned weekly, however if
the lter warning indicator ashes, immediately turn off the appliance and clean
lters before further use. Refer to `Care of your Energysaver®´.
Electrical connection
The electrical connection is to the right hand side of the heater (passes out of
the rear of the appliance). A 3-pin plug is supplied, this must be connected to
a dedicated earthed power point. The power point must be to the side of the
heater and a maximum of 1500 mm (cord supplied is 1500 mm). It must not
be above the unit as this is a potential re hazard.
If the supply cord is damaged and requires replacing, it must be replaced by a licensed
tradesperson. This must be a genuine replacement part available from Rinnai.
Floor protection
The Rinnai Energysaver® discharges a large volume of warm air at a
low level. Heat emanating from the heater may over time affect the
appearance of some materials used for ooring, such as, carpet, vinyl,
cork or timber. This may be amplied if the air contains cooking vapours
or cigarette smoke. To avoid this occurring, it is recommended that a mat
be placed in front of the appliance.
AT LEAST
750 mm
Humidier tray
Ensure the access panel and humidier tray are in place before using your Energysaver®.
Rinnai recommend you ll the tray to the water level indicator as marked—taking care not to
overll.
Rinnai New Zealand Energysaver®Operation and Installation Manual:
RHFE-309FT and RHFE-559FT (01-10)
10
General information
Installation by a licensed tradesperson
Ensure your installer talks to you about the use and care of this appliance and that you
understand these instructions. They also need to complete their installer details at the back of
this manual and leave the manual with you.
Improper installation, adjustment, service or maintenance can cause serious injury, property
damage or death. Please ensure your installation is completed by a licensed tradesperson.
Odours coming from your heater
When the heater is operated for the rst time or after long periods of non
use a slight odour may be emitted. This is normal. If odours persist switch
off the heater and contact Rinnai.
Do not use aerosols, paint, polishes etc. while the heater is in use as this
may cause unpleasant odours.
Outside ue terminal
On cold days steam may be discharged from the ue terminal. This is normal
with high efciency appliances such as the Energysaver® range and does not
indicate a fault.
Regularly check the outside ue terminal to make sure it is clear of plant
growth and from other obstructions.
Maintenance/servicing
Rinnai has a maintenance, service and spare parts network with personnel who are
fully trained and equipped to give the best advice on your Rinnai appliance. If your
appliance needs maintenance or servicing for repair, please call Rinnai (0800 746 624)
from a land line and select option one for a service centre in your area.
For reliable operation the Rinnai Energysaver® should be checked (by a licensed tradesperson)
every two years (including inspection of the ue system). If located in a particularly dusty
environment or subject to excess lint, for example dog hair or where there are newly laid
carpets then annual maintenance would be benecial.
Regular maintenance or servicing is not covered by the Rinnai warranty.
Do not attempt to carry out any maintenance or service work other than that mentioned in the
troubleshooting section. If you have any other faults or problems, please refer to your installer
or call Rinnai.
Otros manuales para RHFE-309FT
3
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Calentador de Rinnai
Rinnai
Rinnai DD180 Hoja de especificaciones
Rinnai
Rinnai Cosypanel Manual de usuario
Rinnai
Rinnai ES17 Manual de usuario
Rinnai
Rinnai RHFE-556FTR Hoja de especificaciones
Rinnai
Rinnai RHFE-551FT Manual de usuario
Rinnai
Rinnai RHFE-556FTR Manual de usuario
Rinnai
Rinnai FC824 Manual de usuario
Rinnai
Rinnai REH-10T Manual de usuario
Rinnai
Rinnai RHFE-551FA Manual de usuario
Rinnai
Rinnai RHFE-951ETR Manual de usuario
Rinnai
Rinnai FC510N Manual de usuario
Rinnai
Rinnai Granada 252 Manual de usuario
Rinnai
Rinnai EX17 Manual de operación
Rinnai
Rinnai RHE1S40N Manual de usuario
Rinnai
Rinnai RHFE-556FTD Instrucciones de funcionamiento
Rinnai
Rinnai RHFE-952ER Manual de usuario
Rinnai
Rinnai rhfe-556ftp Manual de usuario
Rinnai
Rinnai Energysaver RHFE-556T Manual de usuario
Rinnai
Rinnai Avenger 25 Manual de usuario
Rinnai
Rinnai Efficiency HD250i Manual de usuario
Manuales populares de Calentador de otras marcas
Empire Heating Systems
Empire Heating Systems WCC65 Manual de usuario
Wetekom
Wetekom 92 86 43 Manual de usuario
Desa
Desa SPC170-F Manual de usuario
Watlow
Watlow Watrod Electric Tubular Heaters Manual de usuario
Haverland
Haverland ECO-DRY GPS Series Manual de lista de piezas
Stelpro
Stelpro ASILVC2060 Series Manual de usuario