Rigol DHO800 Series Manual de usuario

www.calcert.com [email protected]1.888.610.7664 0

Guaranty and Declaration

Trademark Information

RIGOL®is the trademark of RIGOL TECHNOLOGIES CO., LTD.

Software Version

Software upgrade might change or add product features. Please acquire the latest software version

Notices

•RIGOL products are covered by P.R.C. and foreign patents, issued and pending.

•RIGOL reserves the right to modify or change parts of or all the specifications and pricing

policies at the company's sole decision.

•Information in this publication replaces all previously released materials.

•Information in this publication is subject to change without notice.

•RIGOL shall not be liable for either incidental or consequential losses in connection with the

furnishing, use, or performance of this manual, as well as any information contained.

•Any part of this document is forbidden to be copied, photocopied, or rearranged without prior

written approval of RIGOL.

Product Certification

RIGOL guarantees that this product conforms to the national and industrial standards in China as

well as the ISO9001:2015 standard and the ISO14001:2015 standard. Other international standard

conformance certifications are in progress.

www.calcert.com [email protected]1.888.610.7664 0

1Safety Requirement

1.1 General Safety Summary

Please review the following safety precautions carefully before putting the instrument

into operation so as to avoid any personal injury or damage to the instrument and

any product connected to it. To prevent potential hazards, please follow the

instructions specified in this manual to use the instrument properly.

1 Only the exclusive power cord

designed for the instrument and

authorized for use within the

destination country could be

used.

8Do not operate the instrument

with suspected failures.

2 Ensure that the instrument is

safely grounded.

9 Provide adequate ventilation.

3 Observe all terminal ratings. 10 Do not operate in wet conditions.

4 Use proper overvoltage

protection.

11 Do not operate in an explosive

atmosphere.

5 Do not operate without covers. 12 Keep instrument surfaces clean

and dry.

6 Do not insert objects into the air

outlet.

13 Prevent electrostatic impact.

7 Avoid circuit or wire exposure. 14 Handle with caution.

WARNING

Equipment meeting Class A requirements may not offer adequate protection to broadcast

services within residential environment.

1.2 Safety Notices and Symbols

Safety Notices in this Manual:

WARNING

Indicates a potentially hazardous situation or practice which, if not avoided, will result in

serious injury or death.

CAUTION

Indicates a potentially hazardous situation or practice which, if not avoided, could result

in damage to the product or loss of important data.

Safety Requirement

www.calcert.com [email protected]1.888.610.7664 0

Safety Notices on the Product:

• DANGER

It calls attention to an operation, if not correctly performed, could result in injury

or hazard immediately.

• WARNING

It calls attention to an operation, if not correctly performed, could result in

potential injury or hazard.

• CAUTION

It calls attention to an operation, if not correctly performed, could result in

damage to the product or other devices connected to the product.

Safety Symbols on the Product:

Hazardous

Voltage

Safety Warning Protective Earth

Terminal

Chassis Ground Test Ground

1.3 Measurement Category

Measurement Category

This instrument can make measurements in Measurement Category I.

WARNING

This instrument can only be used for measurements within its specified measurement

categories.

Measurement Category Definitions

• Measurement category I is for measurements performed on circuits not directly

connected to MAINS. Examples are measurements on circuits not derived from

MAINS, and specially protected (internal) MAINS derived circuits. In the latter

case, transient stresses are variable. Thus, you must know the transient withstand

capability of the equipment.

• Measurement category II is for measurements performed on circuits directly

connected to low voltage installation. Examples are measurements on household

appliances, portable tools and similar equipment.

• Measurement category III is for measurements performed in the building

installation. Examples are measurements on distribution boards, circuit-breakers,

wiring (including cables, bus-bars, junction boxes, switches and socket-outlets) in

the fixed installation, and equipment for industrial use and some other

Safety Requirement

www.calcert.com [email protected]1.888.610.7664 0

equipment. For example, stationary motors with permanent connection to a

fixed installation.

• Measurement category IV is for measurements performed at the source of a

low-voltage installation. Examples are electricity meters and measurements on

primary overcurrent protection devices and ripple control units.

1.4 Ventilation Requirement

This instrument uses a fan to force cooling. Please make sure that the air inlet and

outlet areas are free from obstructions and have free air. When using the instrument

in a bench-top or rack setting, provide at least 10 cm clearance beside, above and

behind the instrument for adequate ventilation.

CAUTION

Inadequate ventilation may cause an increase of temperature in the instrument, which

would cause damage to the instrument. So please keep the instrument well ventilated and

inspect the air outlet and the fan regularly.

1.5 Working Environment

Temperature

Operating: 0℃ to +50℃

Non-operating: -30℃ to +60℃

Humidity

• Operating:

Below +30℃: ≤90%RH (without condensation)

+30℃ to +40℃: ≤75% RH (without condensation)

+40℃ to +50℃: ≤45%RH (without condensation)

• Non-operating:

Below +60℃: ≤90%RH (without condensation)

WARNING

To avoid short circuit inside the instrument or electric shock, never operate the

instrument in a humid environment.

Altitude

• Operating: below 3 km

• Non-operating: below 15 km

Safety Requirement

www.calcert.com [email protected]1.888.610.7664 0

Protection Level Against Electric Shock

ESD ±8kV

Installation (Overvoltage) Category

This product is powered by mains conforming to installation (overvoltage) category II.

WARNING

Ensure that no overvoltage (such as that caused by a bolt of lightning) can reach the

product. Otherwise, the operator might be exposed to the danger of an electric shock.

Installation (Overvoltage) Category Definitions

Installation (overvoltage) category I refers to signal level which is applicable to

equipment measurement terminals connected to the source circuit. Among these

terminals, precautions are done to limit the transient voltage to a low level.

Installation (overvoltage) category II refers to the local power distribution level which

is applicable to equipment connected to the AC line (AC power).

Pollution Degree

Pollution Degree 2

Pollution Degree Definition

• Pollution Degree 1: No pollution or only dry, nonconductive pollution occurs.

The pollution has no effect. For example, a clean room or air-conditioned office

environment.

• Pollution Degree 2: Normally only nonconductive pollution occurs. Temporary

conductivity caused by condensation is to be expected. For example, indoor

environment.

• Pollution Degree 3: Conductive pollution or dry nonconductive pollution that

becomes conductive due to condensation occurs. To be found in industrial

environment or construction sites (harsh environments). For example, sheltered

outdoor environment.

• Pollution Degree 4: The pollution generates persistent conductivity caused by

conductive dust, rain, or snow. For example, outdoor areas.

Safety Class

Class 2

1.6 Care and Cleaning

Care

Do not store or leave the instrument where it may be exposed to direct sunlight for

long periods of time.

Safety Requirement

www.calcert.com [email protected]1.888.610.7664 0

Cleaning

Clean the instrument regularly according to its operating conditions.

1. Disconnect the instrument from all power sources.

2. Clean the external surfaces of the instrument with a soft cloth dampened with mild

detergent or water. Avoid having any water or other objects into the chassis via the

heat dissipation hole. When cleaning the LCD, take care to avoid scarifying it.

CAUTION

To avoid damage to the instrument, do not expose it to caustic liquids.

WARNING

To avoid short-circuit resulting from moisture or personal injuries, ensure that the

instrument is completely dry before connecting it to the power supply.

1.7 Environmental Considerations

The following symbol indicates that this product complies with the WEEE Directive

2002/96/EC.

The equipment may contain substances that could be harmful to the environment or

human health. To avoid the release of such substances into the environment and

avoid harm to human health, we recommend you to recycle this product

appropriately to ensure that most materials are reused or recycled properly. Please

contact your local authorities for disposal or recycling information.

You can click on the following link to download the latest version of the RoHS&WEEE

certification file.

Safety Requirement

www.calcert.com [email protected]1.888.610.7664 0

2Document Overview

This manual gives you a quick overview of the front and rear panel, user interface as

well as basic operation methods of DHO800 series.

TIP

For the latest version of this manual, download it from RIGOL official website

Publication Number

QGA36101-1110

Software Version

Software upgrade might change or add product features. Please acquire the latest

version of the manual

Format Conventions in this Manual

1. Key

The front panel key is denoted by the menu key icon. For example,

indicates the "Default" key.

2. Menu

The menu item is denoted by the format of "Menu Name (Bold) + Character

Shading" in the manual. For example, Setup indicates the "Setup" sub-menu under

the "Utility" function menu. You can click or tap Setup to access the "Setup" menu.

3. Operation Procedures

The next step of the operation is denoted by ">" in the manual. For example,

> Storage indicates first clicking or tapping and then clicking or tapping

Storage.

4. Connector

The front/rear panel connector is denoted by "Brackets + Connector Name (Bold)",

for example, [AUX OUT].

Content Conventions in this Manual

DHO800 series digital oscilloscope includes the following models. Four-channel

models and two-channel models share the same operation method. Unless otherwise

specified, this manual takes the four-channel model DHO814 as an example to

illustrate the operation methods of DHO800 series oscilloscope.

Document Overview

www.calcert.com [email protected]1.888.610.7664 0

Model Max. Analog Bandwidth No. of Analog Channels

DHO802 70 MHz 2+EXT

DHO804 70 MHz 4

DHO812 100 MHz 2+EXT

DHO814 100 MHz 4

Document Overview

www.calcert.com [email protected]1.888.610.7664 0

3General Inspection

1. Inspect the packaging

If the packaging has been damaged, do not dispose the damaged packaging or

cushioning materials until the shipment has been checked for completeness and

has passed both electrical and mechanical tests.

The consigner or carrier shall be liable for the damage to the instrument resulting

from shipment. RIGOL would not be responsible for free maintenance/rework or

replacement of the instrument.

2. Inspect the instrument

In case of any mechanical damage, missing parts, or failure in passing the electrical

and mechanical tests

3. Check the accessories

Please check the accessories according to the packing lists. If the accessories are

damaged or incomplete

Recommended Calibration Interval

RIGOL suggests that the instrument should be calibrated every 18 months.

General Inspection

www.calcert.com [email protected]1.888.610.7664 0

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de prueba de Rigol

Rigol

Rigol MS05000-4CH Manual de usuario

Rigol

Rigol DS1000D series Manual de usuario

Rigol

Rigol DG2052 Manual de usuario

Rigol

Rigol DS70000 Series Manual de usuario

Rigol

Rigol MSO1000Z series Manual de usuario

Rigol

Rigol DS2000 Series Manual de usuario

Rigol

Rigol DS1000CA series Manual de usuario

Rigol

Rigol DS1000Z Series Manual de usuario

Rigol

Rigol DS1000E series Manual de usuario

Rigol

Rigol DS4000 Series Manual de usuario

Rigol

Rigol DS2000 Series Manual de usuario

Rigol

Rigol DS1000 Series Manual de usuario

Rigol

Rigol DS4024 Manual de usuario

Rigol

Rigol DS1000E series Manual de usuario

Rigol

Rigol DHO1000 Series Manual de usuario

Rigol

Rigol DS70000 Series Manual de usuario

Rigol

Rigol MSO1000Z series Instrucciones de funcionamiento

Rigol

Rigol DHO1202 Manual de usuario

Rigol

Rigol DS1204B Instrucciones de funcionamiento

Rigol

Rigol DS4000 Series Manual de usuario

Rigol

Rigol DS6000 Series Manual de usuario

Rigol

Rigol DS1074B Manual de usuario

Rigol

Rigol DS2000E Series Instrucciones de funcionamiento

Rigol

Rigol RP7000S Series Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario