Rice Lake 260-10-1 Manual de usuario

Rice Lake 260-10-1 Digital Handrail Scale

Height Rod Accessory

The optional height rod (PN 172958) can be attached to the Rice Lake 260-10-1 Digital Handrail Scale and the

combination provides a single, convenient multipurpose station for obtaining the height and weight of individual

people.

Unpacking the Height Rod

Parts contained in the shipping box

include:

A - Height rod with attached bracket

B - Bracket insert

C - Two screw knobs

Figure 1. Height Rod Parts

After unpacking, visually inspect the height rod to ensure all components are included and undamaged. Contact

Rice Lake Weighing Systems and the shipper immediately if the height rod was damaged during shipping.

Assembling the Height Rod

The height rod must be attached to the Rice Lake 260-10-1 Digital Handrail Scale handrail center post using the

following steps.

1. Place the bracket insert into the bracket. The bracket insert is slightly more flared on one side and this must

be placed toward the height rod. If the bracket insert is placed incorrectly, there will be a gap between the

bracket insert and the outside edge of the bracket. When placed correctly, the outside edges of the bracket

and the bracket insert will fit snugly and be flush.

Incorrect Correct

Gap

Figure 2. Bracket Insert Placement

2. Insert the screw knobs through the holes in the bracket and the

bracket insert.

3. Working from the back of the scale, hold the height rod and hold the

bracket insert and screw knobs in place. While facing the handrail

center post, tilt the top edge of the height rod down and insert it

between the handrail and the left side of the handrail center post. Tilt

the top edge of the height rod up until the rod is vertical.

4. Position the bracket and the screw knobs to line up with the holes in

the back of the handrail center post.

5. Tighten the screw knobs until the bracket is rigid and does not move.

Figure 3. Secure Height Rod Assembly

Verify the Height Rod

Verify the accuracy of the height rod by measuring an object of known height and adjust, if necessary, using the

following steps.

1. Hold the outer sleeve of the height rod to prevent it from dropping down

when the screws are loosened. Loosen the two large screws directly

behind the outer sleeve. Do not remove the screws.

2. Carefully move the outer sleeve of the height rod up or down until it

accurately measures the known height.

3. Tighten the two large screws (finger tight only). Do not over tighten. Do

not use power tools.

Figure 4. Height Rod Adjustment

Using the Height Rod

The height rod can measure heights from 25.5 to 83 inches (65 to 211 cm). The inner rod of the height rod slides

through the outer sleeve, raising and lowering the headpiece to easily accommodate people of different heights.

1. Raise the headpiece until it is perpendicular to the height

rod and snaps into place.

Headpiece

Inner Rod

Read line for less

than 55 inches

Read line for greater

than 55 inches

Outer Sleeve

2. Raise the inner rod of the height rod until the person can

easily stand without touching the headpiece.

3. Have the person step on the scale and stand underneath the

headpiece with their head level.

4. Lower the inner rod of the height rod until the headpiece

just touches the top of the person’s head.

5. For people shorter than 55 inches (139 cm) read the height

measurement at the red line underneath the headpiece. For

people taller than 55 inches (139 cm) read the height

measurement at the red line on the outer sleeve of the

height rod.

Figure 5. Height Rod Measurement Parts.

230 W. Coleman St. • Rice Lake, WI 54868 • USA

U.S. 800-472-6703 • Canada/Mexico 800-321-6703 • International 715-234-9171 • Europe +31 (0)26 472 1319

www.ricelake.com www.ricelake.mx www.ricelake.eu www.ricelake.co.in

Rice Lake Weighing Systems is an ISO 9001 registered company.

PN 173048

December 4, 2015

Otros manuales para 260-10-1

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Escala de Rice Lake

Rice Lake

Rice Lake RL350 Series Manual de usuario

Rice Lake

Rice Lake VS-10 Manual de usuario

Rice Lake

Rice Lake RL101 Manual de usuario

Rice Lake

Rice Lake CLS-M Manual de usuario

Rice Lake

Rice Lake DeckHand Manual

Rice Lake

Rice Lake ISHIDA IP-AI Manual de usuario

Rice Lake

Rice Lake RL1100EM Manual de usuario

Rice Lake

Rice Lake RoughDeck SS Manual de instrucciones

Rice Lake

Rice Lake Summit SB-1000 Manual de usuario

Rice Lake

Rice Lake RL1200 Manual de usuario

Rice Lake

Rice Lake Digi DI-10 Manual de usuario

Rice Lake

Rice Lake 140-10-7N Series Manual de usuario

Rice Lake

Rice Lake Multiple Animal Scale Portable Suplemento

Rice Lake

Rice Lake OS-10 Manual

Rice Lake

Rice Lake MSI-4260 IS Manual de usuario

Rice Lake

Rice Lake RoughDeck SS Manual de usuario

Rice Lake

Rice Lake IB Series Manual de usuario

Rice Lake

Rice Lake INT700 Manual de usuario

Rice Lake

Rice Lake RL150-10-7 Manual de usuario

Rice Lake

Rice Lake 350-10-4 Manual de usuario

Rice Lake

Rice Lake DIGI DSX-1000 Manual de usuario

Rice Lake

Rice Lake RS-130 Manual de usuario

Rice Lake

Rice Lake BCD Manual

Rice Lake

Rice Lake 550-10-1 Manual de usuario

Manuales populares de Escala de otras marcas

AWS

AWS ZEO-50 Manual de usuario

Gima

Gima Glass Body Fat Analyzer Manual de lista de piezas

Seca

Seca 374 Manual de usuario

TEC

TEC TEC SL59 SERIES Manual de usuario

Axis

Axis B/E Series Manual de usuario

Alecto

Alecto ACW-40 Manual de usuario

IKA

IKA RCT basic safety control Manual de usuario

ADE

ADE M20011 Manual de usuario

Duronic

Duronic KS3000 Manual de usuario

Digi

Digi SM-720 Manual de usuario

Cardinal

Cardinal CS Series Manual de usuario

Korona

Korona Kastella Manual de usuario

A&D

A&D FC-50Ki Manual de usuario

BDA

BDA CAMARGUE Manual de usuario

Tanita

Tanita HD-357 Manual de usuario

Leifheit

Leifheit 03173 Manual de usuario

Lumme

Lumme LU-1340 Manual de usuario

Fidelity Electronics

Fidelity Electronics G2e Manual de usuario