Rice Lake TE Series Manual de usuario

TE Series Tuning Fork Balance

Ethernet Option Installation

The Ethernet Option (PN 186079) provides an RJ-45 port for Ethernet output communication from the TE Series Balance. This

document describes the installation procedures and communication settings for the Ethernet Option.

To ensure safe and proper use of the balance, completely read this documentation and the TE Series Operation

Manual (PN 185193) before use. Store both documents in a safe place near the balance to review as needed.

Manuals and additional resources are available from the Rice Lake Weighing Systems website at www.ricelake.com

Warranty information can be found on the website at www.ricelake.com/warranties

Unpacking and Option Parts

Immediately after unpacking, visually inspect and ensure all components are included and undamaged. If parts were damaged

in shipment, notify Rice Lake Weighing Systems and the shipper immediately.

Figure 1. Ethernet Option Parts Illustration

Option Installation

Make sure that the power is disconnect before installation of the Ethernet Option.

1. Remove the screw securing the option slot cover and remove the option slot cover.

Figure 2. Remove Option Slot Cover

2. Insert the option board along the rail of the option slot until surface of the option faceplate is flush with the balance

chassis within 0.5 mm.

3. Secure the option in place with the screw previously removed.

Figure 3. Insert and Secure Option

Use LAN cable of “CAT 5” or higher. When using a non-shielded LAN cable, attach the included ferrite core

approximately 2'' from the connector.

IMPORTANT

Ethernet Option Board Removal Screw Ferrite Core

CAUTION

Note

PN 205762 Rev A

March 12, 2021

230 W. Coleman St. • Rice Lake, WI 54868 • USA

U.S. 800-472-6703 • Canada/Mexico 800-321-6703 • International 715-234-9171 • Europe +31 (0)26 472 1319

Rice Lake Weighing Systems is an ISO 9001 registered company.

www.ricelake.com

PN 205762 Rev A

March 12, 2021

TE Series Balance Ethernet Option

Communication Settings

The Ethernet Option board is equipped with “Xport” manufactured by Lantronix. Refer to the External Input/Output Functions

and Communications sections in the TE Series Operation Manual (PN 185193) for information on settings and configuration.

“Baud Rate”, “Parity”, “Stop Bit”, and “Response Command” are associated to the internal communication between

the balance and the Ethernet Option, not the external communications. If these settings have been changed,

reconfigure them to the default values.

IP Address Setting

1. Download DeviceInstaller on a PC:

a. Go to the website: https://www.lantronix.com/products/DeviceInstaller/

b. Click Download Software.

c. Download the file name: Stand-alone DeciveInstaller Setup application for Windows (125 MB)

2. Install DeviceInstaller on PC.

3. Connect the balance to the network:

a. Connect the balance with the Switching Hub and power on the balance.

b. Through the PC’s Start Menu, go to “Lantronix” → “DeviceInstaller”.

c. Once DeviceInstaller is open, press F1 on the keyboard to access the DeviceInstaller Help file.

The Ethernet Option MAC address is indicated on the faceplate of the option under the port.

Communication Specifications

Connector RJ-45 (8P8C)

Interface Ethernet 10Base-TX (auto-sensing)

Version Version 2.0 / IEEE 802.3

Protocols TCP/IP, UDP/IP, ARP, ICMP, SNMP, TFTP, Telnet, DHCP, BOOTP, HTTP, Auto IP

Management Start bit Internal Web server, SNMP (read only), Serial login, Telnet login, Microsoft Windows-based utility for configuration

Security Parity bit Password protection, Optional 256-bit AES Rijndael encryption

Option Removal

Make sure that the power is disconnect before removal of the Ethernet Option.

1. Remove the screw securing the option.

2. Insert the removal screw to pull out the option from the balance.

Figure 4. Option Removal

Note

CAUTION

Otros manuales para TE Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Escala de Rice Lake

Rice Lake

Rice Lake DIGI DC-782 Manual de usuario

Rice Lake

Rice Lake RL350-10 Series Manual de usuario

Rice Lake

Rice Lake ISHIDA WM-Nano Manual de usuario

Rice Lake

Rice Lake DIGI DC-150 Manual de usuario

Rice Lake

Rice Lake Summit SB-1150 Manual de usuario

Rice Lake

Rice Lake MSI-4260B Manual de usuario

Rice Lake

Rice Lake Ishida Uni-7 Series Guía del usuario

Rice Lake

Rice Lake Ishida Uni-7 Series Manual de usuario

Rice Lake

Rice Lake WLS-C Manual de instrucciones

Rice Lake

Rice Lake 250-10-2 Manual de usuario

Rice Lake

Rice Lake IQ9500 Manual de usuario

Rice Lake

Rice Lake RoughDeck SS Manual de usuario

Rice Lake

Rice Lake BenchMark Series Manual

Rice Lake

Rice Lake D1100 Series Manual de usuario

Rice Lake

Rice Lake MSI-4260 IS Manual de usuario

Rice Lake

Rice Lake D300 Series Manual de usuario

Rice Lake

Rice Lake rl-mps-30 Manual de usuario

Rice Lake

Rice Lake Uni-9 Series Manual de usuario

Rice Lake

Rice Lake 250-10 Series Instrucciones de funcionamiento

Rice Lake

Rice Lake RL1100EM Manual de usuario

Rice Lake

Rice Lake Challenger 3 MSI-3460 Manual de usuario

Rice Lake

Rice Lake Competitor Series Manual de usuario

Rice Lake

Rice Lake Uni-9 Series Manual de usuario

Rice Lake

Rice Lake Multiple Animal Scale Portable Suplemento

Manuales populares de Escala de otras marcas

AWS

AWS ZEO-50 Manual de usuario

Gima

Gima Glass Body Fat Analyzer Manual de lista de piezas

Seca

Seca 374 Manual de usuario

TEC

TEC TEC SL59 SERIES Manual de usuario

Axis

Axis B/E Series Manual de usuario

Alecto

Alecto ACW-40 Manual de usuario

IKA

IKA RCT basic safety control Manual de usuario

ADE

ADE M20011 Manual de usuario

Duronic

Duronic KS3000 Manual de usuario

Digi

Digi SM-720 Manual de usuario

Cardinal

Cardinal CS Series Manual de usuario

Korona

Korona Kastella Manual de usuario

A&D

A&D FC-50Ki Manual de usuario

BDA

BDA CAMARGUE Manual de usuario

Tanita

Tanita HD-357 Manual de usuario

Leifheit

Leifheit 03173 Manual de usuario

Lumme

Lumme LU-1340 Manual de usuario

Fidelity Electronics

Fidelity Electronics G2e Manual de usuario